High Voltage from Thin Air?

[Loki67671]

Hi all,
An excerpt copy of the e-mail I sent to Dr. Stiffler last night:

COPY
Now with this rig set up as you see it here the input supply to the SEC15-3 is 21.93 VDC @ 61.65ma = 1.35W input power. Both towers are driving identical 48-LED boards and they are freaking bright! WIRELESSLY in the back tower I have measured off of that big double ladder filter back there 10.3mv across a 1 ohm 1 watt carbon resistor and 132.4 VDC across the AV PLUG. So 10.3ma of current times 132.4 VDC = 1.36W in the back tower alone! What about the front 48 LEDS? And the warmed transistor? Looks like a possible CEC of say 2 to 1 at least. The bandwidth is well over 500MHz wide and this rig is running ROCK STEADY for 2 hours now. Unfortunately I have to go to bed and go to work for the corporate PIGS in the morning but I just thought you might get a kick out of this. :-)

END COPY


I am a professional test developer and I have worked my butt off to try and get these measurements. THIS CLEARLY APPEARS TO ME to be empirical evidence that I am in fact cohering energy from the lattice as stated by Dr. Stiffler. It looks like a CEC of at least 2 to 1 or even better than that. Can I explain this? HELL NO! Do I believe it? I have no choice. All of the tools of my trade and the training/brainwashing say this is what it is. MY PEERS won't even entertain getting anywhere near this! I hope like hell Dr. Stiffler gets his peer review so the G.D. classes will be available for goof balls like me.

My name is James M. Taddeo Sr., I am on the web as Loki67671, and I am a professional test developer currently working in the embedded systems markets. I am acting here as an INDEPENDENT DEVELOPER and I DO NOT claim nor do I INSINUATE any affiliations with any other entities WHAT-SO-EVER. I have no budget beyond personal funds. I personally am of the technical opinion that my work is correct and that I am MEASURING greater energy in this system than I am inputting from my conventional power supply. I am going to keep working with this technology as long as I am able to do so.

The attached photo's show the set-up last night!

Best regards,
James M. Taddeo Sr.
Independent Research Developer
North Western Pennsylvania, USA

[DrStiffler]

Hi all,
An excerpt copy of the e-mail I sent to Dr. Stiffler last night:

COPY
Now with this rig set up as you see it here the input supply to the SEC15-3 is 21.93 VDC @ 61.65ma = 1.35W input power. Both towers are driving identical 48-LED boards and they are freaking bright! WIRELESSLY in the back tower I have measured off of that big double ladder filter back there 10.3mv across a 1 ohm 1 watt carbon resistor and 132.4 VDC across the AV PLUG. So 10.3ma of current times 132.4 VDC = 1.36W in the back tower alone! What about the front 48 LEDS? And the warmed transistor? Looks like a possible CEC of say 2 to 1 at least. The bandwidth is well over 500MHz wide and this rig is running ROCK STEADY for 2 hours now. Unfortunately I have to go to bed and go to work for the corporate PIGS in the morning but I just thought you might get a kick out of this. :-)

END COPY


I am a professional test developer and I have worked my butt off to try and get these measurements. THIS CLEARLY APPEARS TO ME to be empirical evidence that I am in fact cohering energy from the lattice as stated by Dr. Stiffler. It looks like a CEC of at least 2 to 1 or even better than that. Can I explain this? HELL NO! Do I believe it? I have no choice. All of the tools of my trade and the training/brainwashing say this is what it is. MY PEERS won't even entertain getting anywhere near this! I hope like hell Dr. Stiffler gets his peer review so the G.D. classes will be available for goof balls like me.

My name is James M. Taddeo Sr., I am on the web as Loki67671, and I am a professional test developer currently working in the embedded systems markets. I am acting here as an INDEPENDENT DEVELOPER and I DO NOT claim nor do I INSINUATE any affiliations with any other entities WHAT-SO-EVER. I have no budget beyond personal funds. I personally am of the technical opinion that my work is correct and that I am MEASURING greater energy in this system than I am inputting from my conventional power supply. I am going to keep working with this technology as long as I am able to do so.

The attached photo's show the set-up last night!

Best regards,
James M. Taddeo Sr.
Independent Research Developer
North Western Pennsylvania, USA

@Jim

Thank you Sir! You are the first man to stand forth in public in the two years I have been working on this in the public domain to identify himself and state his results.

Deep felt thanks......

[Shamus]

OK, I rewound the coils on the towers so there's now the correct number of turns on them but I'm still having trouble with this thing. I'm using a piece of wood as my proto-board and I've kept the wiring as short as possible. All connections are soldered with the exception of the one wire going to the receiver tower as I want to be able to try wireless easily. One thing which may be causing problems is that I don't have any copper tape so I've attached the top of the coils to the top hats with vinyl duct tape.

On the receiver tower I have two LED strings on AV plugs; one with five and the other with ten.

To say the thing is fiddly would be an understatement. I was able to get it to work wirelessly for a while but then it wouldn't work later on. With the one wire connection to the receiver I'm able at times to touch the transmitter tower with my finger and get the LEDs to light up with moderate brightness; otherwise the LEDs are lit but very dim. Current draw in this case is almost nonexistant (not touching the tower) to around 50mA (touching with my finger). This is all running on two 12V SLAs connected in series. Not sure what to look at, except maybe the transistor (where do you get those press fit wire connectors Doc?).

[Tecstatic]

Dear Doc

As you have spent an incredible amount of time and effort to teach the rest of us, and as I have used many hours also, I will respond to your steam blow off. I have included your complete post in fragments with my comments.

IMHO we have had some indirect communication, and although I'm not sure, I would not be surprised if I am partly responsible for some of your high steam pressure. So this will be more direct.

As as they often say in American movies, "this is complicated". But let me have a try, If you get bored before the end, thats OK. :-)

@All

Steam Blow Off - not directed to anyone and to all.

It gets me so damn mad at the general population when they hide behind pseudo-names and faked generalized and constantly changing email addresses

Why do I hide my real name ?

Well, it is now two years since I stumbled upon Stan Meyer, which I was brainwashed not to believe a word of, but sufficient curious to do a search and found "Confirmation of anomalous hydrogen generation by plasma electrolysis" by Tadahiko Mizuno et al from Iwate University, Japan.

This is the single document with the most impact on the direction of my life.

I spent all my spare time reading about the very large amount of suppressed inventions. I also found a document named "TheHiddenEvil.pdf". That was surely not good night stories for kids. So I decided to learn more by joining this forum, but staying "anonymous" to protect myself.

When I published my one wire lighting experiments in this forum a year ago, it ended up on the PanaceaUniversity site. Three days later my computers were infected.
I had backup, so I did not loose data, but I lost a functional IT environment. It was beyond my skills to prevent infection, although I did my very best with 25+ years of computer experience. This lasted for two months, until I got a solution, and it is part of the story I lost my small company. Who can afford to stay out of busyness for two months ?

I still suffer the consequences from that.
I am not retired yet, so I have to worry for money sustaining my daily life.

I was so naive regarding "anonymity" and I have payed the cost, The harassment on the Internet line will probably be a life long companionship.

My Internet provider knows something is not right, but I get no help. Should I report it to the police

I can now communicate via the net almost normally with a special system.
It changes IP address constantly. This means that when I create a "free" email account, It is out of operation in a few hours. Big brother do not like anonymity.

and their never ending desire to hurt people because they themselves are not happy with life that I have indeed wondered why I ever became involved with the public and each and every day increases the volume of that question ringing in my mind.

Although I can not state everything in my life is perfect, I have been thinking that happiness is dependent upon the relation between expectations and reality. I live a good life after all with a wonderful enlightened wife.

I don't belong to the group of people wishing to hurt other people. I just retract if I feel this is the solution. If that hurts, I think this belongs to another category.

I still believe you have two conflicting set of values in your mind, more about that below...

Once a person honestly enters this type of public domain, fellows there is no! return. Why, well look around at what you see; lurkers, plants, dissenters, disenfranchised, money mongers, government and cooperate watchdogs. Once you mire in the bog you are unable to pull free without losing something valuable.

People who know me will never accuse me of greed. I can only plead guilty to "lurker" when I don't like the rules of the game.

As long as I participated with hard work, I have reported my humble findings, and I can not be accused for fearing to expose my ignorance when I had more questions than answers.

Although it can be frustrating, please remember, you can not commit a person beyond skills, but the limits can be extended by positive thinking and "moving the points closer".

Here is the bone I pick. Everyone wants to know where the energy comes from, that is so damn simple, its everywhere, its you yourself. All I claim is that I am able to tap it in a productive way. I do not violate laws or understanding, the water is there, drink from it.

You can not count on your fingers and toes the number of unknowns that have told me they indeed support my findings "BUT" not a one will attache his/her real name and position to it and make it public, is that strange or not?

In this great world we live where it appears money rules (strange we still seeing increasing population growth, secondary desire) its not a quest for knowledge any longer or self pride, its $.

In my youth I did consider many aspects of the state of the world. I decided to have no kids, so I married a woman with a child. So when I get old I have no children to help me. Thats OK and prepared for.

Here is a typical result from three people that I do indeed believe have the required equipment and procedural knowledge to present factual and convincing results. "Doctor, I did it for you. I can not be involved because of where I work, you can use what I have found it is yours" REALLY! Or "You know my position here is very good and the other Prof's would attack me and gee I have a wife and kinds and all. Hey I will give you all the data, I did it for you". BET ME!

Or "Sorry I don't have any credentials, but its real, you have found it for sure. I will support you all the way, but of course it can't be known who I am." HOW DARE ME!

I am committed, I chose to go this way and after the OU.com BS and waste of time I came to EF, albeit it now appears as many of the same people and subjects have migrated here so its not as interesting as it was at first.

If some want to try and corner me, so be it, try, I have nothing to gain. Guess I just had the thought I could leave something around when I left that had some meaning, but life is life is it not and the games go on.

Please allow me some controversial statements here.
I fully respect peoples personal choice about religion, and I hope in return I get respected for being a non religious person.

From my point of view we still live in the medieval age. The only difference
is the technology and the living standard (so far).

-The few is exploiting the many.
-The confession is replaced by surveillance technology and the patent system.
-The population is brainwashed to the money system, rich in greed, poor in empathy and caring.

And now back to the conflicting set of values:


Why do you seek the recognition of your work in a system designed by the elite for effective suppression ?

This question may be more difficult that it seems.

And it's fighting windmills. That has been tried by countless researchers, and the payback is not positive in any way.

And as you probably recognize, nobody can earn a living from producing free energy devices in the current society, except for the ones writing books about it.

"If you want free energy, you have to give it away". I don't remember where I read it, but it is wise words...

If I was in your place, I would get tanned in the admiration from your "real peers" here. What we lack in knowledge, we have in positive thinking and being open minded, and in numbers. (full excuses to you very bright guys)

And as I see it Doc, you have a good heart, else you had not gone public in the first place...

You get what I want to give and not more or no less, at least until I give up and accept it just ain't worth it folk.

Now back to work, I feel better after that.

I'll come back later and see all the screams.

I hope you see my post as an explanation and not a scream.

And trust me, I know the psychology being extremely committed and feeling surrounded by non-committers, but my humble advice is to find peace with the positive joiners, and ignore the rest. From my point of view, seen from the surface of this forum, you are surrounded by a lot of positive people.

I wish the very best for you, and please remember, loosing trust in the good, is the road to loose everything.

Thank you for all I leaned from you. I am not living the most easy part of my life right now. Some days I'm a bit low on energy, so please excuse me, if you maybe feel I'm too sensitive and retracted with shallow feelings for no reason, although you really try to help.

Eric

[Inquorate]

Tunable

I put mine onto a board; really need a tunable L2, the one off the emitter leg.

My name is in the email below, I'm a personally funded experimenter and work as a disability carer. I live in sydney australia. I stand by my comments posted on this site or linked to it regarding input and output and the mechanism allowing cec>1.

Love and light

[DrStiffler]

Dear Doc

As you have spent an incredible amount of time and effort to teach the rest of us, and as I have used many hours also, I will respond to your steam blow off. I have included your complete post in fragments with my comments.

IMHO we have had some indirect communication, and although I'm not sure, I would not be surprised if I am partly responsible for some of your high steam pressure. So this will be more direct.

As as they often say in American movies, "this is complicated". But let me have a try, If you get bored before the end, thats OK. :-)




Why do I hide my real name ?

Well, it is now two years since I stumbled upon Stan Meyer, which I was brainwashed not to believe a word of, but sufficient curious to do a search and found "Confirmation of anomalous hydrogen generation by plasma electrolysis" by Tadahiko Mizuno et al from Iwate University, Japan.

This is the single document with the most impact on the direction of my life.

I spent all my spare time reading about the very large amount of suppressed inventions. I also found a document named "TheHiddenEvil.pdf". That was surely not good night stories for kids. So I decided to learn more by joining this forum, but staying "anonymous" to protect myself.

When I published my one wire lighting experiments in this forum a year ago, it ended up on the PanaceaUniversity site. Three days later my computers were infected.
I had backup, so I did not loose data, but I lost a functional IT environment. It was beyond my skills to prevent infection, although I did my very best with 25+ years of computer experience. This lasted for two months, until I got a solution, and it is part of the story I lost my small company. Who can afford to stay out of busyness for two months ?

I still suffer the consequences from that.
I am not retired yet, so I have to worry for money sustaining my daily life.

I was so naive regarding "anonymity" and I have payed the cost, The harassment on the Internet line will probably be a life long companionship.

My Internet provider knows something is not right, but I get no help. Should I report it to the police

I can now communicate via the net almost normally with a special system.
It changes IP address constantly. This means that when I create a "free" email account, It is out of operation in a few hours. Big brother do not like anonymity.



Although I can not state everything in my life is perfect, I have been thinking that happiness is dependent upon the relation between expectations and reality. I live a good life after all with a wonderful enlightened wife.

I don't belong to the group of people wishing to hurt other people. I just retract if I feel this is the solution. If that hurts, I think this belongs to another category.

I still believe you have two conflicting set of values in your mind, more about that below...



People who know me will never accuse me of greed. I can only plead guilty to "lurker" when I don't like the rules of the game.

As long as I participated with hard work, I have reported my humble findings, and I can not be accused for fearing to expose my ignorance when I had more questions than answers.

Although it can be frustrating, please remember, you can not commit a person beyond skills, but the limits can be extended by positive thinking and "moving the points closer".



In my youth I did consider many aspects of the state of the world. I decided to have no kids, so I married a woman with a child. So when I get old I have no children to help me. Thats OK and prepared for.



Please allow me some controversial statements here.
I fully respect peoples personal choice about religion, and I hope in return I get respected for being a non religious person.

From my point of view we still live in the medieval age. The only difference
is the technology and the living standard (so far).

-The few is exploiting the many.
-The confession is replaced by surveillance technology and the patent system.
-The population is brainwashed to the money system, rich in greed, poor in empathy and caring.

And now back to the conflicting set of values:


Why do you seek the recognition of your work in a system designed by the elite for effective suppression ?

This question may be more difficult that it seems.

And it's fighting windmills. That has been tried by countless researchers, and the payback is not positive in any way.

And as you probably recognize, nobody can earn a living from producing free energy devices in the current society, except for the ones writing books about it.

"If you want free energy, you have to give it away". I don't remember where I read it, but it is wise words...

If I was in your place, I would get tanned in the admiration from your "real peers" here. What we lack in knowledge, we have in positive thinking and being open minded, and in numbers. (full excuses to you very bright guys)

And as I see it Doc, you have a good heart, else you had not gone public in the first place...



I hope you see my post as an explanation and not a scream.

And trust me, I know the psychology being extremely committed and feeling surrounded by non-committers, but my humble advice is to find peace with the positive joiners, and ignore the rest. From my point of view, seen from the surface of this forum, you are surrounded by a lot of positive people.

I wish the very best for you, and please remember, loosing trust in the good, is the road to loose everything.

Thank you for all I leaned from you. I am not living the most easy part of my life right now. Some days I'm a bit low on energy, so please excuse me, if you maybe feel I'm too sensitive and retracted with shallow feelings for no reason, although you really try to help.

Eric

@Eric
Understood and accepted.

Here is something I was told and is a test of reality. "I was told that I got away with releasing to much before the point of redemption was passed (point of no return)."

I was plagued for a very long time with hacking and virus planting. I still consider myself a professional programmer (won't get into that) and it made me sit back and wonder how to get it all corrected. Well it stopped, hummm...

When it stopped was soon after I left ou.com hummm.... so was it MIB or something less or maybe more sinister?

[DrStiffler]

OK, I rewound the coils on the towers so there's now the correct number of turns on them but I'm still having trouble with this thing. I'm using a piece of wood as my proto-board and I've kept the wiring as short as possible. All connections are soldered with the exception of the one wire going to the receiver tower as I want to be able to try wireless easily. One thing which may be causing problems is that I don't have any copper tape so I've attached the top of the coils to the top hats with vinyl duct tape.

On the receiver tower I have two LED strings on AV plugs; one with five and the other with ten.

To say the thing is fiddly would be an understatement. I was able to get it to work wirelessly for a while but then it wouldn't work later on. With the one wire connection to the receiver I'm able at times to touch the transmitter tower with my finger and get the LEDs to light up with moderate brightness; otherwise the LEDs are lit but very dim. Current draw in this case is almost nonexistant (not touching the tower) to around 50mA (touching with my finger). This is all running on two 12V SLAs connected in series. Not sure what to look at, except maybe the transistor (where do you get those press fit wire connectors Doc?).

@Shamus
Can you shoot a picture up? I am pretty good at seeing a problem.

The 18-1 will direct connect via L3 to a 48 LED board and drive the "H" out of it. So.....

Waiting for a picture....

[DrStiffler]

Ignore this

Ignore..............

[DrStiffler]

OK, I rewound the coils on the towers so there's now the correct number of turns on them but I'm still having trouble with this thing. I'm using a piece of wood as my proto-board and I've kept the wiring as short as possible. All connections are soldered with the exception of the one wire going to the receiver tower as I want to be able to try wireless easily. One thing which may be causing problems is that I don't have any copper tape so I've attached the top of the coils to the top hats with vinyl duct tape.

On the receiver tower I have two LED strings on AV plugs; one with five and the other with ten.

To say the thing is fiddly would be an understatement. I was able to get it to work wirelessly for a while but then it wouldn't work later on. With the one wire connection to the receiver I'm able at times to touch the transmitter tower with my finger and get the LEDs to light up with moderate brightness; otherwise the LEDs are lit but very dim. Current draw in this case is almost nonexistant (not touching the tower) to around 50mA (touching with my finger). This is all running on two 12V SLAs connected in series. Not sure what to look at, except maybe the transistor (where do you get those press fit wire connectors Doc?).

(where do you get those press fit wire connectors Doc?)

They are screw, compression. Called European Terminal Connectors. Plastic and come like 24 or 30 to a strip. Cut easy with a knife to what you want.

www.jameco.com

[Tecstatic]

@Eric
Understood and accepted.

Here is something I was told and is a test of reality. "I was told that I got away with releasing to much before the point of redemption was passed (point of no return)."

I was plagued for a very long time with hacking and virus planting. I still consider myself a professional programmer (won't get into that) and it made me sit back and wonder how to get it all corrected. Well it stopped, hummm...

When it stopped was soon after I left ou.com hummm.... so was it MIB or something less or maybe more sinister?

Doc, Thank you.

Without attempting to compare to you, my experiment lighted 9 4' CFL's. It also destroyed them quickly, because the filament dissolved and blackened the ends of the tubes in a short time. I would not be surprised if it could light 100 or more tubes. I have not tried it, and I will not do it either.

I think this is the reason for the prompt response I got.

In your case who could fear that tiny led ?
"They" lost the importance of the principle. And now it is out among us.

But as long as "they" "only" inject virus in our computers, we can live with that in some way or another.

But when they start injecting our bodies with viruses, I guess not.

Eric

[DrStiffler]

Removed

Removed as not relevant here.

[Shamus]

I'll have some pictures up for you tomorrow. In the meantime, I'm going to take one more close look at it to make sure I didn't do something stupid.

BTW, if I hold my finger with extremely light pressure on the transmitter tower I get a mean bite from that sonofa*****.

[Inquorate]

avramenko not rectifying hertzian radio waves

@shamus, when you get bit (Ouch eh) it's not in self feedback mode.

All - very interesting observations to share;

YouTube - definitely not rectified hertzian waves in excited field of sec 15-3

love and light

[CosmicFarmer]

18-1's came in the mail, and I am excited! Thank you Dr Stiffler.
I would have to say the chip was excellently soldered. Very professional work.

One question though, I noticed there were no parasitic capacitance plates. Does it need it? I might have to make them.

Once I can get 1 running I will get the other 3 running. Once I have data I will publish it with my name on it, respecting the inventor. I will give these away for free to local people. I dont trust the mail... my stuff is always coming back broken.

Someone honestly needs to load up on these SEC circuits and take a trip to Africa and help people by setting up power stations. I think the 3rd world might have a bigger chance for utopian life in the next 5 to 10 years because of all the alternative energy techs people bring there... and how the big cities will always remain the same, with people and credit and big screen TV's that dont let you think original thoughts.

anyway sorry to ramble. Anyone know if I should make the parasitic capacitance plate?

Also the diodes at the back of the led board - is there a schematic that I missed? I saw the picture but I couldnt tell exactly where things were put.

THANKS AGAIN

You did it doc!

--------
edit

Is there a 18-1 assembly document? I saw the 15- and 20- document.

[Inquorate]

Parasitic capacitance

@ cosmicfarmer - It's all about redirecting the energy otherwise expended in heat, as the aether flows into mass.

I can't copy and paste but see the comments on my video

The way I see it, aether's relation to mass is like a bath full of water; pull the plug and a vortex forms above the plug.

The water is aether, the vortex matter. However, instead of water going down the drain, the vortex-matter emits the aether energy as heat / radiation.

Unless we redirect the aether flow, where we will get an evident change in heat distribution: somewhere will be colder if we achieve cec>1

So, any mass that you add (so long as it doesn't capacitively detune or otherwise over load the system) will increase the energy Cohered.

My current theory.

Love and light