High Voltage from Thin Air?

[Inquorate]

Thread newbies

@ baroutologos - hi mate, if you want to understand the sec, pls do the same as the rest of us and go back and read this thread. Dr Stiffler has kindly posted some of his work on scribd.com; I suggest you read those documents - search for ronald Stiffler there.

Otherwise, we'd all just be repeating ourselves, and you'd just have to do the same amount of reading anyway.

Pls understand, I mean no offence. This is not about egos here.

Love and light

[DrStiffler]

Ok i cannot tell that I have not been warned about that
....

So no more Tesla. Cool, let the dead peaple in peace. No more OU talk. As far as the coherent energy coefficient is similar to COP and excess energy is harvested with spatial resonance i am fine with the terminology used and theories deployed.
No problem at all.
.....

As far as the outline concept goes, i have been told an Joule thief circuit excites a trasmiter coil. Via adjustments, tramsiter's coil resonance is made to coincide with receiver coil's maximum resosonance and there we have the distinct phenomenon of SR with wireless energy transfer and if done right good energy harvest?


Baroutologos

@Baroutologos

As far as the outline concept goes, i have been told an Joule thief circuit excites a trasmiter coil. Via adjustments, tramsiter's coil resonance is made to coincide with receiver coil's maximum resosonance and there we have the distinct phenomenon of SR with wireless energy transfer and if done right good energy harvest?

Please do not think this. People tend to pickup or get on the train at their station and may never have been or heard of the ones before. The coils are only a small fraction of where we have been and what we can do. A CEC>1 is by far not lomited to the towers (last experiments).

[Cloxxki]

Hi Doc,
I may have an idea to get international attention. Sorry if my ideas are big.
HHO can be made part of the plan, but is only more complicated.

Reception towers on (computer-controlled or not) RC stlye electric cars.
Go-Karts if you have the power.
Big tranmission tower in the middle of a go-kart track.
Let vehicles do laps until they need new tires. They'll need new drivers first though.

Highways for electric cars fed by tesla/Stiffler towers, that will interest people. let alone toll highway entrepeneurs.

How cool are electric cars, if the refill part is taken out of the equasion?
What better place to build load and load of windmills and solar panels than along a highway? Batteries on board of vehicles would be to cover the no-reception area's, if any. EP meters on board, payment based on off-take.

OK, carry on.

J

[samedsoft]

Cloxxi,

You can you build one and test some results ? How did you become senior? Can you let me know?


Doctor,

Can you show 18-1e circuit that you mentioned in video?

Thanks in advance..
Nuri Temurlenk, Love and Brothership..

[DrStiffler]

Exciter Testing

@All

Well I have worked at and seen some impressive labs, but the one where I was allowed to perform many tests on the SEC Exciters was something else. The antenna range and chambers have a value of over the $25Million.

Okay, what the major points are is the radiation pattern from the Exciter board (18-x Series) and the measurement to determine if it is conventional in drop off as you move away from the board.

I have stated many times the Exciters are not following conventional decline.

The first test was the pattern coming off the board. I need to insure I had designed it correctly and this test was to show that. Now because we could not tape in this lab, I duplicated what we did with about $1K worth of gear.

What I show on the video is a duplication that falls within 5% of what the lab results were.

Enjoy and learn how it is done.

YouTube - Radiation Pattern from a SEC Exciter

Thanks for all your support.

[morpher44]

the battery

The first test was the pattern coming off the board.

The SEC Exciter appears to be mounted ABOVE the battery
and I would expect any radiation from that board to be
nicely line-of-sight to the RF meter w/o being influenced by
the battery.
So I guess it still seems odd that the battery would influence
that RF foot-print in any way.
Shouldn't the radiation be coming from the coils?

Is the battery blocking radiation that is coming from the LED
board which is down at battery level?

[DrStiffler]

The SEC Exciter appears to be mounted ABOVE the battery
and I would expect any radiation from that board to be
nicely line-of-sight to the RF meter w/o being influenced by
the battery.
So I guess it still seems odd that the battery would influence
that RF foot-print in any way.
Shouldn't the radiation be coming from the coils?

Is the battery blocking radiation that is coming from the LED
board which is down at battery level?

@morpher44

Your continued lack of experience and knowledge about Exciters.

Why are you posting here again when I told you, you are not wanted here???

[morpher44]

question

Why are you posting here again when I told you, you are not wanted here???

@drstiffler

Just asking a question.
Your video was interesting. I've watched your stuff
for years now. It was a harmless question.

[Loki67671]

Nice new video Doc........Very interesting! I suspect that most folks honestly do not understand the huge amount of work involved here.
A real RF lab????? See the GREEN in the smile?
I can't wait to see what comes next in the data. Obviously I do get to see and test conventional radio installations fairly regularly but this monster is NOT.....NOT....... a "conventional" radio transmitter so I'm not real sure what exactly to expect. I know that I would expect from a conventional omni antenna an inverse square pattern of sorts and this video is a real nice demo of a fairly uniform field. No lobes or otherwise. I wonder if I can get my hands on a field strength meter or RF milvolt meter. Any ideas for the budget challenged? I think I can actually pull that off and my boards will be here very soon as well.


Best regards,
Jim

[Loki67671]

The SA probably won't be of much help here, at least not a cheap one like mine. I wish I had the the HP or better yet the Rhode & Schwartz from work.......Now that would be SWEET.......Ahhh to have a budget and some high end test gear............

[Inquorate]

rf detection

something like this

YouTube - Inquorate 22

YouTube - Inquorate 23 detector

pls note that i had no idea what i was talking about here; very newby comments - it just picks up RF

use an led instead of a neon to a scope or just observe brightness.

great idea to check out component layout on a board


thankyou again Dr Stiffler

[DrStiffler]

The SA probably won't be of much help here, at least not a cheap one like mine. I wish I had the the HP or better yet the Rhode & Schwartz from work.......Now that would be SWEET.......Ahhh to have a budget and some high end test gear............

@Loki67671

Well I have a nice Agilent on the FedEx truck as we speak. It is not the top of the line, yet will take care of 2GHz and full FFT/Math with on board 32K memory, printer, RS232 and HP. Software for interface PC for extended math analysis. Now the China challenged SA is going to go the way of the US Dollar.

I will do a video to show how we did the next test, can't get as far away as on the field or as sensitive as in a chamber, but it will be good education and explain the way its done. Oh, yes the data is nice, like where is all the RF anyway.

[Loki67671]

I eagerly await the arrival of several things now...........

[theremart]

RE: building my towers...

Mart;

Check here;

Wireless or One-Wire Energy Transmission Construction Guide

Thanks!

Where can I get the 12.5mm Lucite rods?

I have both 20 gauge and 23 gauge magnet wire, will this work or does this require the 24 guage?

Thanks again...

[Cloxxki]

Cloxxi,

You can you build one and test some results ? How did you become senior? Can you let me know?


Doctor,

Can you show 18-1e circuit that you mentioned in video?

Thanks in advance..
Nuri Temurlenk, Love and Brothership..

With a team of engineers to my disposal, anything is possible :-)
I think forums like these attribute poster status to number of posts only.