High Voltage from Thin Air?

[Tecstatic]

@Doc, all

Doc,

Although we don't use the same equipment, your last two videos demonstrates the effects I have seen also.

After my last postings I have added more towers, even a small 60mm ball with a naked 34 winding spiral coil as I have posted it, is able to sustain a lit CFL. At that location I have no light without the passive STWR, no light.

I have had a total of
1 SECTWR
3 SECRPT
2 SRPT

Running together with the 7 CFLs, and "measured" with my led sniffer, I have an exited "cloud" around the bunch. My solder station goes really crazy, but this time no headache

The only way I can affect the SECTWR consumption (with the resolution I have) is with the direct neighbors.

Let me repeat my previous statement from post #1514:

I agree on the "mass repeaters" or the SECRPT are worth a study. In my last video the leftmost SECRPT wirelessly operated 2 CFLs, and later I got it up to 3 with a nice amount of light. The single powered SECTWR did not increase consumption by adding the SECRPT with CFLs.

I wonder if this is the secret in coming progress, as it may not be limited in voltage swing.

I also wonder if a set of repeaters with a certain shape and positioned in a certain relative pattern may bring more magic along with more electronics.

I'm sorry for the 24/7 limitation, as this deserves more time.

I suspect Doc has more or less indirectly shown us more than we have included in experimenting so far.

IMHO now the NILS are tested the latest showings need attention.

I also think it is important to have in mind to separate the strength of the excitation from the properties of this creature Doc calls the "Lattice". so we get the most from it.

Eric

[Jules Tresor]

Viva Panacea !

Hello Ash,

Beautiful new website design ! Congratulations ! It's easy to navigate

I'd like to send some money for your Doc Stiffler replications, but I can't find anymore your Paypal Donation button ?!

Thanks everyone for your dedication at trying to improve our world

David

Edit 1: Waow Ash, you put some of my pictures in the document on SEC ! What an honor !
I haven't been experimenting since, because I'm very overbooked with other stuff. I still in Asia, but working on different humanitary projects, and also driving my business. BUT I will contribute financially, again, because I still think that all the open source projects are very important.
And you guys that are experimenting and sharing on these forums, are those who are writing the brighter future of hearth.
I encourage everyone to support the guys involved in these out of the box technologies.
Thanks and good luck.

[Tecstatic]

Allow me to share some thoughts.

2 years ago my passion for cars and engines (now more like getting from A to B) lead me to a YT video with Stanley Meyers car running on water.

My society pre-programmed reaction was "this is not possible", but my curiosity won, and 15 minutes later I have downloaded the experiment report of Takahido Mizuno et al:

"Confirmation of anomalous hydrogen generation by plasma electrolysis"

reporting anomalous heat production equivalent up to 80 times the Faradic production for the same input.

Not perfectly reproducible, but anyway very interesting, "there must be some physics reality behind this", was my first though, and this certainly seems to be the case.

In much the same way I can't forget the 30GW "battery powered", "extremely compact, lightweight, and rugged" device I have mentioned before on page 28 post#834.. There must be some physical reality behind this.

Here follows a list of phenomenas I expect could be part of the 30GW device.

We have seen connecting a spatial coil and a sphere to a signal generator can make a CFL lighting.

See gotoluc doing his polarity shifting to coils, which cost no or almost no charge from a capacitor:

http://www.energeticforum.com/renewa...html#post69903

Take your time to watch the video and note the result of Luc's excellent observation skills. And it is not even optimal tuned here, it's just the basic discovery.

Combine with the dielectric material reporting here:

http://www.energeticforum.com/renewa...html#post73602

The military also fear the volatility of semiconductors, so the use of semiconductors are probably reduced as much as possible.

A Tesla coil supply has a resonant circuit with a large capacitance, a coil and a small capacitance discharging through a spark gap, acting as an ultra short duration pulse exciter.

Frolov did also see an increase in energy by including a spark gap (plasma) in a resonant circuit.

Can we do the polarity shift with a spark gap in an "open" (or almost open) circuit ?
Can we synchronize two gaps with opposite polarities for "voltage shifting coils"

At least my mind it resembles the equivalent mechanical resonant system of two masses connected in line with two "massless springs" as I have mentioned in a previous post.

IMHO this is what is shown in Doc's repeaters in his videos in post #1601, and what I also showed in the video in post #1392 at time 0:54.and which I have used further for SECRPTs lighting the 7 CFLs.

If this picture of operation is a rubbish view, please enlighten me.

Maybe this page could offer some inspiration:
Richie's Tesla Coil Web Page

Is the Spatial Gate a voltage transformation device by employing mutually excited masses of different "weight" ?

Looking at antennas, some types "focus" the signal and thus have a high gain.

A single SECTWR with a sphere has a uniform non-external focused field as viewed from above.

Does other geometries exist, which do strong focusing within a number of masses ?
Maybe focused by the field being "in phase" from several masses of certain shapes?

The Marx generator is just a means of obtaining high voltage excitation, and if done like Luc showed, with almost no energy consumption, enabling battery operation.

So many questions and so little time for a single individual, but maybe Doc, or one of you brilliant guys, or the collective effort of us all could provide an answer to some of this ?

Eric

Ps. Doc, may I ask what you mean by saying "The World is Falling Apart"

@Ash, Thank you for all the work of you and your m8's, you act as a documentation reference

[Armagdn03]

Can we do the polarity shift with a spark gap in an "open" (or almost open) circuit ?
Can we synchronize two gaps with opposite polarities for "voltage shifting coils"

@ Techtastic

Director

An excellent starting page, The tubes are not needed, and the effect can be reproduced open air, also, note the the ease at which currents are purposely switched using electromagnets, this concept combined with charge conserving circuits such as those shown by Lindemann, or even a simple LC circuit leads the experimenter with many opportunities to work on.

[DrStiffler]

Followup

Ps. Doc, may I ask what you mean by saying "The World is Falling Apart"

Well I lectured a great group that for the most part were PhD's and I expected that all of them could calculate 10% of 100 in their head in a few hundred milliseconds. Sorry to say that was the exception.

[DrStiffler]

Cleaner Video

This video is much cleaner and easy to see what is taking place.

YouTube - Wireless Energy Transmission and Repeaters

[theremart]

Hi...

This video is much cleaner and easy to see what is taking place.

YouTube - Wireless Energy Transmission and Repeaters

In the last video you demonstrated 2 Large coils on your receiver towers. Is there a place that has the specs on these.

looks very interesting.

[ashtweth]

Hello Ash,

Beautiful new website design ! Congratulations ! It's easy to navigate

I'd like to send some money for your Doc Stiffler replications, but I can't find anymore your Paypal Donation button ?!

Thanks everyone for your dedication at trying to improve our world

David

Edit 1: Waow Ash, you put some of my pictures in the document on SEC ! What an honor !
I haven't been experimenting since, because I'm very overbooked with other stuff. I still in Asia, but working on different humanitary projects, and also driving my business. BUT I will contribute financially, again, because I still think that all the open source projects are very important.
And you guys that are experimenting and sharing on these forums, are those who are writing the brighter future of hearth.
I encourage everyone to support the guys involved in these out of the box technologies.
Thanks and good luck.

Hi David Eric and ALL. Thx a lot guys, All credits to the Doc and you guys tho , now we can finally get on with getting some R and D done with the towers to help. This looks like these new efficient LED's might be a candidate for the SEC experiments

"An LED comprising V-shaped ridges instead of flat wafers offers 20-fold light extraction improvement claim a team of scientists from Japan and France. The researchers say that they have produced the first semiconductor structures to promise significant improvements in LED output by coupling evanescent waves (Applied Physics Letters 94 091102). "
Evanescent waves boost LED brightness - optics.org

At the end of the day, The Doc and every one doing practical applications is where its at, not these PHD's, eventually they will have to catch on. Hope to add some more tests here soon guys. @ David yup all is on the about page my friend.Panacea University - About

Ash

[Tecstatic]

Well I lectured a great group that for the most part were PhD's and I expected that all of them could calculate 10% of 100 in their head in a few hundred milliseconds. Sorry to say that was the exception.

@Doc,
Yes. much has changed since we went to school, although I'm a bit younger,
I also on average see less devotion to learning fully the skills of our age, luckily we see exceptions here on the forum.

That by the way reminds me of a popular joke among the blue collar guys:

The young civil engineer arrives at his new job, and waits for someone to show him his chair.

An executive passes by. "I can see you are new here, you can start sweeping the storage floor".

"But - I'm a civil engineer."

"OK, then I will show you how to do it".

---------------

Nice video Doc, A picture (movie) is worth a thousand words. Also nice to see mother nature works the same at your place

@Armagdn03
Thank you for the link. I have seen it before, if I remember right, Inquorate showed interest in this subject. At that time I had no application for it, that might still be the case, as some other stuff also teases me. As a kid I learned the art of manipulating glass tubes, so I should be able to replicate if necessary.

But isn't it a problem that you have to pay some energy to sustain the current in the tubes, at least for small devices ?

Also a big thanks for the Leyden jar video in another thread. I guess this is old knowledge, which has been kept in the dark. This is a very inspiring video.

Slightly OT:

Meyl told me the Swiss Tecstatica device worked, but was of no practical use. Meyl postulated that extended running of the device creates a thunderstorm. They keep an eye on this to switch off the device before lightning strikes.

IMHO this is a high voltage polarity shifting device, maybe with some distracting nonsense also to hide the operating principle.

But can any of you confirm this unlikely thunderstorm effect ?


Eric

[Armagdn03]

@Armagdn03


But isn't it a problem that you have to pay some energy to sustain the current in the tubes, at least for small devices ?

The switching effect only needs the presence of a perpendicular B field, so I had thought of using it in conjunction with a high Q resonant coil, minimizing loss. But as you hinted at, it may not be practical till a certain size device is used, then switching losses become less of an issue.

[ABCStore]

Guys, please help me with coils

What would be a correct number of turns or AWG24 and/or AWG20 wire over a standard 1/2" PVC pipe (exactly 16mm diameter) ? I'm having trouble getting maximum output out of SEC18...
I don't have neither LCR nor spectrum analyzer...

Thanks,
ABC

P.S. Excellent videos, Doc!

[Inquorate]

Inductance of coils

Guys, please help me with coils

What would be a correct number of turns or AWG24 and/or AWG20 wire over a standard 1/2" PVC pipe (exactly 16mm diameter) ? I'm having trouble getting maximum output out of SEC18...
I don't have neither LCR nor spectrum analyzer...

Thanks,
ABC

P.S. Excellent videos, Doc!

http://www.pronine.ca/coilcal.htm

Also, look up my vids on youtube for poor man's spectrum analyser.

If you don't have an Oscilloscope, just amplify the signal enough to drive an led.

[Inquorate]

@ tecstatic - yeah that was me. Trying to make a high voltage transistor by suppressing sparks with vortex magnetic field.. Needs huge coils for the electromagnets, which I don't have the money for.

@ dr Stiffler - I take it the repeaters could be more than 2 in number? How important are the high Q coils (air gaps in windings) with no insulation?

Based on reflections on previous observations of experiments, I'd guess very important.

I love how it's not magnetic; whatever scalar waves are made of, they'd be hard to detect with conventional measuring devices. Seems capacitive coils and exposed metal surface 'pick up' the 'radiation' quite well, as well as re-transmit the power.

and the distance proves non-hertzian waves, as the brightness of the further LED's would significantly drop if it were so.

Very nice

[DrStiffler]

153.5 Volts 2.5 feet away

Some off time viewing for ALL.

YouTube - Wireless driving 48 White LED's 2.5 feet away

[Inquorate]

Great work

Some off time viewing for ALL.

YouTube - Wireless driving 48 White LED's 2.5 feet away

That really is a fair milestone Doc. Way cool. I'm flat on my back these days - Doctor's orders - so living vicariously through the updates.

Love and light