Announcement

Collapse
No announcement yet.

MYLOW121363's Johnson motor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #91
    There is still a opposite Opinion at Bottom with a few open Questions.
    Seems noone can say, what is true at last.
    HJohnson got obviously problems too, after had his Motor running.
    All what left for us is Ashes.
    Theorizer are like High Voltage. A lot hot Air with no Power behind but they are the dead of applied Work and Ideas.

    Comment


    • #92
      He may have actually hoaxed this machine. It is a shame because with my testing of his machines parameters, (which I replicated as close as possible with what info I had), it may have actually worked without any outside intervention. My rotor has bar magnets like his last machine, and would work as long as I moved the stator magnet by hand. Rickoff is currently building a magnet motor that uses this moving stator design. It is these people hoaxing these projects that make it hard for those genuinely interested in building a self running machine. It seems that this kind of disinformation is all over the internet. It is up to us to determine what is real or not. The only way I know of doing that is by replicating the machine. Good Luck. Stealth

      Comment


      • #93
        Yes, its a shame, when you get misleaded from some Peoples.
        Even in this Case it was in a unusal way for me.
        Usual, someone says at last, See Guys, there is no OU and no working Magnet Motor.
        All your Efforts are for nothing, go and buy farther Oil, i only fooled you.
        But even when his Design not worked, then H.J would be questionable too,
        If he did build a working Model, and i still think he did, No matter, what is there after.
        I still stay at some Points from Magnets, like,
        once, Nord and Southpol are not 180° from eachother, One Pol push more, the other one drags more.
        Even from this it should be possible to get something out from it.
        And darnit, that i dont have a Source for a Chest of Barmagnets and some bend one.
        I got some from a Car Van, what are bend, but the Poles are top and Bottom,
        not the same anyhow.
        And well, very sad, that you tried it, and still got not a good Result.
        Theorizer are like High Voltage. A lot hot Air with no Power behind but they are the dead of applied Work and Ideas.

        Comment


        • #94
          Good mylow motor

          From all that I have read on Mylows story is that after he got a visit by the MIB he changed everything. the design of the motor etc etc.

          I thinrk the first design most likely was a good design and the second design was perpetrated by the MIB to throw everybody off the track of the good motor.

          Look in history, anybody that comes up with a workable device gets either jailed, discedited, killed or disappears after a vistit from the MIB. I don't see this case as any different.

          He probably had a working motor, otherwise there would not have been such attention from vested interests. After which Myslow changed his machine and his essence.

          some say mylow is to blame. I don't think that is true. He was forced to do it under threat in my opinion. Forntunately I saved some of the early videos of his good machine.

          Comment


          • #95
            Don't Trust The Info.

            To any people still considering replicating the earlier version "Stonehenge" HJ motor:

            To accept that there was a later suppression of Mylow, you would also have to then accept that you cannot trust ANY of the information now in print regarding the device specs.... WHOM EVER it came from.

            To be sure; you would have to get magnets of BOTH orientations now (magnetized "through the width" with both legs of the "U" being the same Pole, AND "through the length" with one open leg of the "U" being North and the other South); and test it with both... Since none of that info can be trusted to be accurate now.... Either it could have been lies to mislead all along, or even later modified when no one was looking.

            I do remember that there was a major discrepancy about the orientation of the iron stator mag early-on... That in my mind was handled suspiciously.

            Personally, i think something very odd is going on with this story (beyond the obvious string fakes, i mean). I don't pretend to know exactly what it is, but i suspect it could be something no one has really mentioned yet (...or that was maybe mentioned briefly somewhere in the hundreds of thousands of words on this, and then forgotten).

            One thing for sure: A simple "prank", with Mylow and his brother as "lone gunmen" ; doesn't add-up... There are significant loose ends that this rather convenient explanation does not answer. Imo, we are being "messed with" big-time: By who, how, and for what ultimate motive is yet to be determined.

            But their execution had a few mistakes: They were not "perfect" by a long shot... And we may indeed get answers eventually

            How to stop the Open Source Energy movement (short of martial law lol), if their usual preferred methods of "secretization", corporate shelving and buy-outs, inventor black-balling, and endless legal attacks won't work against it...? And having an effective Open Source movement around the world means that ANY DAY, ANY MINUTE, a working free energy technology could appear on the scene.... Lol this must make for some sleepless nights for some people

            So the only way left for them to stop it, is to convince us to quit ourselves.... Would such a goal not be worth a long-term project with significant budget and an acceptable amount of risk to do so?

            Sure it would. That doesn't automatically mean this is the case, but it is food for thought

            Comment


            • #96
              Mylow on fakery

              If anyone is interested, here is a link to a phone message Sterling received from Mylow to "explain" his seeming fakery.

              090520_Mylow-on-faking.wav - Windows Live

              Here's Sterling's take on this:

              "Mylow phoned me this afternoon and we talked for a while. I had asked him a question in an email to the effect of, "have all the devices that you've shown us actually worked, but you put the fakery on there to keep the MIB at bay?"

              He was afraid to address that, saying that they're still watching him, and that is also why he can't have people in to see, and why he can't send working stuff out for people to inspect.

              He feels bad about what happened, but said he couldn't have done it any other way.

              The sooner someone replicates (openly, documented) HJ's work with the input Mylow has provided, the safer he will be.

              Sterling"
              "Seek wisdom by keeping an open mind to alternative realities, questioning authority, and searching for truth. Only then, when you see or hear something that has 'the ring of truth' to it, will it be as if a veil has been lifted, and suddenly you will begin to hear and see far more clearly than ever before." - Rickoff

              Comment


              • #97
                I see now why the first MIB goon returned Mylow's motor: it didn't work without the fishing line.

                Comment

                Working...
                X