Announcement

**Bodkins** · 09-25-2009, 07:06 AM

well I love it thank my friend Im really excitement about trying this i have loads of dead battery

**SkyWatcher** · 09-25-2009, 07:27 AM

Hi Bodkins, are you telling me this is the first instance of seeing this circuit and how it desulphates batteries nicely. I posted in big joule thief thread and bedini solid state. Well maybe it was a good thing he plastered it in every thread because it seems people aren't reading them anymore. Also if the battery is really bad use a cap in parallel with the battery, it seems to help.
peace love light
Tyson

**dllabarre** · 09-25-2009, 03:10 PM

I'd like to see the schematic but everytime I try to look at the link Aaron posted below I get many unless popups.

Can someone point me to a nice clean link to the schmatic?

Thanks

**BobBrown** · 09-25-2009, 03:23 PM

Pop up troubles

I had the same problems. mostly I have my popup control on -- no pop ups --. But even so , I had to try it several times. First I tride to print it, only worked for one picture. then I gave up and tride to download and save. Persistence, finaly got me my downloads.

Andrew T.
PATHS ~ Mind Energetics

**Sephiroth** · 09-25-2009, 03:35 PM

Is there actually anything valuable in these downloads? I'm beginning to think this WAS spam since he gets paid for downloads

Free Software & Audio,Video Downloads | Download Free Movies and Share to Earn

**shubhamforme** · 09-25-2009, 06:01 PM

best and simple solid state radiant charger

Originally posted by Bodkins View Post

well I love it thank my friend Im really excitement about trying this i have loads of dead battery

hello bodkins,
have taken a lot of efforts to build this charger,, try this one out and i am sure u'll like it.....
for coils, its much easier to use a center tap 5 amp 12-0-12v transformer,so that u wont need to wind up ur own coils,,,
and use a 50k 3watt potentiometer with a 100 ohms 1 watt resistor in series....
and let me know your results...
thanks

**shubhamforme** · 09-25-2009, 06:04 PM

[QUOTE=Sephiroth;68963]Is there actually anything valuable in these downloads? I'm beginning to think this WAS spam

no none of my links are spams,infact ziddu.com is a very effective was to post files...
and if you think that these files are spam then its better not to open them...

**dllabarre** · 09-25-2009, 06:05 PM

Originally posted by shubhamforme View Post

hello bodkins,
have takena lot of effort to build this charger,, try this one out and i am sore u'll like it.....
for coils, its much easier to use a center tap 5 amp 12-0-12v transformer,so that u wont need to wind up ur own coils,,,
and use a 50k 3watt potentiometer with a 100 ohms 1 watt resistor in series....
and let me know your results...
thanks

Please post the schematic here.
I can't deal with all the popup ads (BS) from the site you used.

Thank you,

**john_g** · 09-25-2009, 07:04 PM

Originally posted by dllabarre View Post

Please post the schematic here.
I can't deal with all the popup ads (BS) from the site you used.

Thank you,

Copied - at last - below

Attached Files

batt-charger.jpg (26.0 KB, 106 views)

**Bodkins** · 09-25-2009, 07:51 PM

Originally posted by SkyWatcher View Post

Hi Bodkins, are you telling me this is the first instance of seeing this circuit and how it desulphates batteries nicely. I posted in big joule thief thread and bedini solid state. Well maybe it was a good thing he plastered it in every thread because it seems people aren't reading them anymore. Also if the battery is really bad use a cap in parallel with the battery, it seems to help.
peace love light
Tyson

its about time sky, well have the time to read all the thread and keep up with life too

**Iotayodi** · 09-25-2009, 09:49 PM

no none of my links are spams,infact ziddu.com is a very effective was to post files

I brought this to Aarons attention yesterday about the site being suspect. It tried to scan my computer for viruses and I powered off immediately.
I dont consider this site safe at all so beware of it.
ziddu.com | WOT Security Scorecard | WOT Web of Trust

**thedude** · 09-25-2009, 10:03 PM

I will give this a try. I'm currently using the bedini self oscillating circuit. I made a schematic of my exact circuit in this thread here at Energeticforum.com.
I personally have found it much easier to use a self oscillating device to charge using radiant energy as compared to SSG, for instance. (however i am finally in the process of completing a Bedini multi-coil machine so I may soon realize different)
Thanks shubhamforme and Aaron.

**SkyWatcher** · 09-25-2009, 10:41 PM

--------OY----------

**SkyWatcher** · 09-25-2009, 11:29 PM

Hi folks, this was from a post i made in bedini solid state oscillator thread, my quote "Hi again folks, quick update based on my last post. I am now seeing results rejuvenating my 6V-4.5AH sealed lead acid battery. I was using too low of an input too see any results, I was initially using 100 millamps at 12V for the joule thief charger and I've now increased the input to 750 milliamps and am able to hold a load at 3.5V and it is steadily increasing, whereas at the 100milliamp input i saw no load handling ability, it would just drop straight to 0 volts. So this is very encouraging and I do believe this battery can be fully recovered. By the way the joule thief is using 18 gauge wire on a laminated choke type core. let me know what ya think." And
my quote "Hi folks, sounds like your results so far are similar to mine, nvisser. Ok, the battery has desulphated enough and its impedance low enough now to put on a normal charger, i did this and it is not taking a full charge yet, so it will need more condition cycling. Though so far I am able to run a small light bulb load for just over an hour drawing 280 milliamps starting at 6.1V and slowly dropping for 1 hour and 10 min. then dropping fast, so it is looking good so far." And my quote "Hi folks, thanks for words blackchisel. For anyone that may be interested, I am now getting 5 hours and 30 minutes on only the 3rd charge/discharge condition cycle from this 6V-4.5AH SLA using the same load. That is about 35% of the rated capacity of this battery, so its coming along well. It's looking like maybe around 10 cycles may bring this battery to full capacity based on the results of the 3 cycles so far, we will see". Now you dont have to look for it, there ya go.
peace love light
Tyson

Announcement

shubhamforme battery charger

shubhamforme battery charger

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment