Announcement

**morpher44** · 09-25-2009, 07:59 PM

hendershot half circuit pulse experiment

This is the schematic I used last night. There are more things to try but I thought I record this in case I loose my notes.

Attached Files

hendershot_pulse_experiment.jpg (470.0 KB, 436 views)

**morpher44** · 09-26-2009, 08:17 AM

Pulsing with a Relay

YouTube - "Hendershot Fuelless Generator" - Pulsing with a Relay

**morpher44** · 09-27-2009, 08:24 AM

well researched article on "free energy"

Very nice "free energy" article...
from 2/19/2004:

Radiant Energy -- Wireless Transformer of High Power Lines?

**morpher44** · 10-02-2009, 06:12 AM

messing around with a buzzer

YouTube - "Hendershot Fuelless Generator" - Relay Pulsing (Part 2)

**morpher44** · 10-02-2009, 06:40 AM

guys on overunity.com

Some folks in Germany are also working on Hendershot
replications and sent me the following URLs.
Much of this is in German which I don't speak:

HENDERSHOT GENERATOR - Neue Erkenntnisse, Theorie über die Funktionsweise

There is also a download section, where we put our documents, measurements, simulations, diagrams and photos:

Freie Energie Free Energy Deutsches Open Source Alternative Energie und ZeroPoint Forschungs Forum OverUnity.de - Hendershot Generator

**mlurye** · 10-03-2009, 11:28 AM

morpher44,
Did you try to build it yourself?
Thank you for the books, they are realy good.

**Michael John Nunnerley** · 10-03-2009, 04:02 PM

Originally posted by morpher44 View Post

Some folks in Germany are also working on Hendershot
replications and sent me the following URLs.
Much of this is in German which I don't speak:

HENDERSHOT GENERATOR - Neue Erkenntnisse, Theorie über die Funktionsweise

There is also a download section, where we put our documents, measurements, simulations, diagrams and photos:

Freie Energie Free Energy Deutsches Open Source Alternative Energie und ZeroPoint Forschungs Forum OverUnity.de - Hendershot Generator

This is the German part of OU.com, same owner.

Mike

**Joit** · 10-03-2009, 04:33 PM

I can read it, and he did rebuild a few things of the Hendershot device.
But i dont know, what diameter he has at his Coils,
But i think, they even tried to build the Caps with a certain Material,
he had some Test runs, but still no luck, to get it to work.
But the Basket coils is one thing, what i am scared for, i can figure, its a lot of work with no guarantee that they work.
I think more, they are receivers, and the Arrangements from all parts maybe are importend.

**morpher44** · 10-04-2009, 08:24 AM

some observations...

Originally posted by Joit View Post

I can read it, and he did rebuild a few things of the Hendershot device.
But i dont know, what diameter he has at his Coils,
But i think, they even tried to build the Caps with a certain Material,
he had some Test runs, but still no luck, to get it to work.
But the Basket coils is one thing, what i am scared for, i can figure, its a lot of work with no guarantee that they work.
I think more, they are receivers, and the Arrangements from all parts maybe are importend.

I looked over the photographs and simulation data but can't read German.

A have a couple of observations about what they are doing...

1) Their cylinder for the cap may not have ferromagnetic material.
W/o it you have to tune for a much higher frequency.
I'm finding that the relay I have is not able to produce
pulses fast enough for my coil (which does have a ferromagnetic
paint can). If it was an air coil ...no way.
So I suspect that what you want is LARGE inductance and
a metal cylinder. One CLUE in a Hendershot photo is a sticker
inside his coil that has the letters Fe (which I believe stands for IRON).
Tune for RELAY pulse speeds and you get the highest power...

2) I suspect simulations are not quite right because a coil with
ferromagnetic material would have non-linear inductance ... and
so a simulation run on a computer probably isn't accounting for that.
It probably rather assumes a CONSTANT inductance in each coil
and transformer.
I believe Hendershot's device is extremely non-linear.
The simulation could be improved to include a couple of things:
- an accounting for the changes to inductance at a certain pulse
frequency (due to the steady flux introduced by pulsed DC) and
- and ways of introducing varying amounts of energy entering the
system via the capacitor as the field gets going...to see if that
alters the result... These capacitors are like antenna.
I wish I could read their stuff to see if they discuss any of this.

3) Resonator 01 has a photo of the magnet - bar - solenoid arrangment.
I'm still torn whether the bar is to stick to the magnet, or instead
be sticking and removed from the solenoid. The latter makes sense
in terms of a larger back EMF (ala Leedskalnin). Pulling the bar
OFF the solenoid -- breaking the magnetic loop -- produces a very
large PULSE. So mechanically this is a bit tricky.
In playing with a buzzer, I can get the buzzer into a state whereby
it doesn't BUZZ but rather the clapper hovers near the solenoid
very rapidly -- 500 hz or so -- and the connection makes and breaks
with a 500hz ARC. This is strange and odd behaviour for a buzzer.
This occurs because the Hendershot coil provides energy back to the
coil -- reversing the magnetic polarity -- repulsing & attracting the bar.
I think this solenoid arrangment is a tricky thing to figure out.
I'm still puzzled by it.
Another alternative is that the bar should be the FULL MAGNET HEIGHT
so as to BEND the fields LEFT and RIGHT out toward the Hendershot
coils to induce current in them. The Solenoid may simply
tweak those fields up and down near the coils. That too would be a way
to produce SPIKES of current in the coils if they are placed close
in proximity to the solenoids. So their bar would need to be larger.

**morpher44** · 10-04-2009, 08:44 AM

trying to build it...

Originally posted by mlurye View Post

morpher44,
Did you try to build it yourself?
Thank you for the books, they are realy good.

So far I have only built parts of the Hendershot Fuelless Generator circuit ... not the full thing.
There are several speculations of what that circuit actually should be ... so a bit of guess work is in order.
The number of turns on the coils is known, yes, but not the desired inductance.
The Magnet-Bar-Solenoid device is not well understood. Lots of experiments needed to figure that one out.
The capacitor is a bit tricky to make. I use household aluminum foil which I suspect has too much resistance. I need to re-think the capacitor.
I have a 5 inch coil (not 5 5/16 inch) and a different number of turns.
I have 30UF and 100UF caps instead of 40UF and 80UF.

My objective at first is to better understand the different ways to hook this up ... and to even pulse it with a chopper circuit or powered relay ... to see how it responds... etc.

This is a bit of a fun research project ... and I'm hoping others get excited and want to take up this challenge as well.

I think it is due time for this Hendershot device to be reverse-engineered.
We have excellent tools now and a much better understanding of the electronics and physics.

From what little I've been able to discover, I can really tell that Hendershot was pretty brilliant here. This was not the invention of a guy who just wired things together and got lucky. This was a well crafted, well designed device which utilized the state-of-the-art (at the time) coil designs (basket weave / honeycomb coils used by radio engineers of his day), an "expensive" 3-pole magnet from a radar magnetron, a specially constructed mechanical solenoid device, etc. Hendershot put many many man hours into this device and it shows.

I do not believe the disinfo that Hendershot was a wizard putting his special body-electric power in as he touched it. It was pointed out that his kids could make his device function when he wasn't even present.
He demoed it to several dignitaries.
It was written up in the media and was a topic of discussion around the country.
There was an effective disinfo campaign to discourage folks
from believing that it could work, etc.

The story is quite intriguing and would make an excellent movie.
Yes those books are really cool. I agree.

I also got my hands on
"Earth Energy, the entrancing force with a thousand names".
That is a bizarre little book.

**morpher44** · 10-04-2009, 09:10 AM

Negative Reactance

The concept of "Negative Resistance" is all the rage ... and if it could be done at room temperature with off-the-shelf parts, it could be exploited for energy devices.

Negative resistance is utilized in "powered" oscillator designs, exploiting
certain non-linear resistance curves that dip down at certain frequencies
and instead of rising.

So I had a thought regarding AC systems.

How about "negative reactance"?

Imagine a coil with two windings... one for a DC pulse bias
and another for your inductance in your circuit.

Suppose you were to pulse a coil with ferromagnetic material
to bias it (like they did in the old days of Magnetic Amplifiers).
Use pulsed DC though, not a steady DC bias.

When the pulse is present, the inductance DROPS.
When the pulse is NOT present, the magnetic field
is retained in the ferro material for a time ... but
eventually the magnetic field starts to collapse.
As it does, the inductance starts to rise in the coil.

The coil, hence, would have a non-linear response curve
that would have low inductance during the pulse and
an increasing inductance when the pulse is NOT present.
NOTE: This pulsed biasing can also be done inductively via
another coil nearby providing a pulsing flux.

So the bias coil is given pulsed DC.
Lets suppose the other coil is fed a pure sine wave.
What would the wave look like as it leaves the coil?

With a certain amount of Joules of energy entering
and leaving the coil, wouldn't there be times
in this curve when there is a negative reactance?

This line of thinking is very new to me ... so I honestly
don't know.

Does anyone have experience with the concept
of "negative reactance" and how to exploit it?

**Joit** · 10-04-2009, 12:58 PM

You can chase the Pages through Google Translator, it translates most of the text like here.
Google Translator Kondensator = Capacitor
Someone did try to put a ferrit core inside, and when he did come closer with an other Ferrit,
he did see some changes, when i did get this right.
I read again partially through the Thread, but they make a lot of Point,
what anyhow dont really helps, but as i saw the Basket coils,
i do think on, what i ve done lately.
Wrap some Wire (50 Turns or more) around the middle from a Coil,
pulse it, like Hendershot does at his Circuits with Caps,
and you can get a lot of HV from the large Coil just from the induction.
I could get this way 400V with ~10khz Pulse, enough for a cfl,
but the Coil is at 500khz Freq, complete different Freq, but stable.
Just the middle Coil goes some hot, and draw even with #28 Wire 2 ah
Hendershot did do that at few Coils at his Circuit, and put them in serie seems.
And somewhere i read a note about, you can get the full induction from a Coil,
when you got one Coil in parallel, and one pointing into the Coil in a 90� Angle.
But anyhow i lost it, and how it was better described.
Both seems that is something, what hendershot did use.

Edit- i forgot, he didnt do a Sim with Pspice, because he know,
that he cant really trust on the Result.

**Joit** · 10-04-2009, 07:53 PM

More Questions

Hubbards approach actually use the NMR?, its about a EM wave?
Someone got a problem, to understand this,
because Hs' device supports 60Hz output.
There is a posibillity that you can do that with a subharmonic Freq,
but it would be 2.8 GHz/60 = 46*10^9 = 46 000 000 000 000 subfrequency,
and he dont think that this works.

Other thing, he's asking, why is PHI importend, but not how.
Maybe its not a EM Wave, but something else? He would like to know,
if hubbard did know any usefull about this.
-I guess, thats a 1 Million Dollar Question,lol-
You are probatly right with the Iron core, an other User did try Alloy,
but the Ironcore did start vibrating, alloy dont.

With non-linear you are right too, and he s guessing, that the buzzer is highly non-linear too.
In Relation with the Caps you could can create subharmonics.
He could create with his Sim strongh Pulses, but he still dont trust it.

He dont think, that the Caps are like a receiver,
at last not in electrical Manner, there would run 100W over it,
and the Wires, where it is connected would probatly heat up.
He would calculate it, but no time.

With the simulation he would only show, when you see the basketcoils as Source and the Buzzer as inductivity, you can reproduce the Statement from Hendershot

-There is a Resonance point at 60hz.
-With the Buzzer you can tune the Generator.

**morpher44** · 10-05-2009, 03:25 AM

Hubbard coil...

Originally posted by Joit View Post

Hubbards approach actually use the NMR?, its about a EM wave?
Someone got a problem, to understand this,
because Hs' device supports 60Hz output.
There is a posibillity that you can do that with a subharmonic Freq,
but it would be 2.8 GHz/60 = 46*10^9 = 46 000 000 000 000 subfrequency,
and he dont think that this works.

Enter frequency (Ghz) > 2.8
2^7 = 21875000.000000 hz
2^8 = 10937500.000000 hz
2^9 = 5468750.000000 hz
2^10 = 2734375.000000 hz
2^11 = 1367187.500000 hz am band
2^12 = 683593.750000 hz am band
2^13 = 341796.875000 hz
2^14 = 170898.437500 hz
2^15 = 85449.218750 hz
2^16 = 42724.609375 hz
2^17 = 21362.304688 hz
2^18 = 10681.152344 hz
2^19 = 5340.576172 hz
2^20 = 2670.288086 hz
2^21 = 1335.144043 hz
2^22 = 667.572021 hz
2^23 = 333.786011 hz
2^24 = 166.893005 hz
2^25 = 83.446503 hz
2^26 = 41.723251 hz

Announcement

Hendershot Replications

Hendershot Replications

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment