Hendershot Replications

[David G Dawson]

Hendershot Generator Resonator

I should mention in the first photo is another modulator in the bottom left hand side.
These are the bell ringer coils with modulation coils around and these are again modulated from a sig gen and the idea worked well with an opposite pulse being generated into both left and right hand circuits.
These were also tried with an Iron Plate and Magnet as in the original setup but again, no action of pulsing in the basketweave or condensers.
There is something here we are missing and hopefully time will overcome.
The problem may be as simple as the type of pulse that is generated is not correct and all of these options have all been achieved with a +/- 20 volt output into the circuits as was the original.
All the best.

Smokey

[mahlag'ash]

help

hello all
you are all good i hope
one thing i dont understande with the hendershot fuelless power generator is there no mention about voltage of capacitors 500uF and 1000uF. the reason i dont start building mine at my risk since i am translator not a electrician
please help.

[pjotterkjen]

hello all
you are all good i hope
one thing i dont understande with the hendershot fuelless power generator is there no mention about voltage of capacitors 500uF and 1000uF. the reason i dont start building mine at my risk since i am translator not a electrician
please help.

The capacitor values you mention are part of a hoax. Please do not spend your money on it as it will not work. Even though their videos are quite convincing they are full of lies.

[pjotterkjen]

unravel the real Hendershot story

morpher44, if you could help answer these questions I'd appreciate it:

Have you ever considered the Hendershot MK1/2 1928 (free energy device in a model airplane) design, with a ring magnet inside coil 8a/b?

Have you ever thought about how Hendershot while testing and fiddling might have com to the MK3 designs through the earth inductor compass and the MK1/2 devices?

Regarding the last Q, I'm trying to link these three devices together and could well use some professional and practical insight, so no theory just the practical facts and evolution of components.

One example is the evolution of the collector, another is the resonator development, and another is the development of the two 'capcoils' of the MK3 designs... I see some pretty clever evolution in each device and am trying to link them into one story.

I'm sure this will help us reconstruct the Hendershot FE Generator.

[N20Wolf]

Lester J Hendershot - Generator

Hendershot Generator:
Apologise for not returning but have been busy with the Generator and now have what I could call a fairly accurate replication.
Completed the home-made Condensers without problems and now have several that are able to be tuned exactly to the 6800pF by wooden paddle pop sticks as pressure tuners.
I used Aluminium sheet for my Condenser form and this has worked well - is simply taped together and butt jointed but making good contact.



Uploaded with ImageShack.us

The unfortunate ending here is that I have been unable to get the device to flip-flop and have been looking at optional means to use as the 'Resonator'.
Tried the multivibrators as earlier described and several other pulse means but none were able to light Leds, that I had placed on each of the capacitors, in a pulsing manner
Have a Tuning Fork resonator here that I am looking at using but needs to be frequency reduced.
What I do now is put the baseboard to one side and return to it when new insights are developed which takes time.

There is something happening here at the 'Resonator' which is the heart of this Generator and this is what we need to investigate - it appears to begin oscillating by itself when the magnetic attraction is just so and looks to be modulating in sympathy with the Aether/Cosmos and this is what we need to connect to.
Lester seems to be using the East/West Magnetic Field and we know little of this and how it works.
His first Motor needs to be studied very closely as he is using the same resonator there but documentation is scarce and is also using Variometers,
variable coils within coils that early vintage Radio used.

The Bloch Wall of a Magnet is a mystery but could be the area that is required to be used in this device.
If you think about the organisation of a Magnet, the centre or Bloch Wall is the East/West field area and we know again very little of this 'Wall' as that is exactly what it is - you can try this with a very small weak axial Neo Magnet on a larger block Ferrite and just see how powerful this 'Wall' really is.
How do you make an East/West Magnet as against a North/South?
Four Poles, why don't we use the other two?
I had set up a field of Magnets as in the picture below hoping that they would continue to oscillate due to outside influence or 'noise' but not the case as they eventually, over some minutes, will stop.



Uploaded with ImageShack.us


I have Magnets here with the same face polarity stuck together and there appears to be a connecting field invloved that allows this to happen.
I will come back to this when I have more information.



Uploaded with ImageShack.us

These are the Multivibrators that I have been using as a Resonator option - mid-rear is the Split-reed where the high voltages were observed and the other is a Synchronous using an original transformer which are like hen's teeth to obtain.
The Crystal Set was for a Moray 'front-end' but was most disappointing and a new one is being built.
This was also inteded as a 'noise' modulator for the 'resonator' but again, disappointing.
Bottom left is the replication of a Hendershot Resonator as used in his Motor - consists of a Ferrite Magnet on the bottom, a thin brass base with a broken coping saw blade soldered to it as the 'resonator', an old power drill stator core which is packed with a coil and two Ferrite Magnets on top.
I used this as a 'resonator' option on the Generator but did not cause oscillation - the device itself worked well with the saw blade oscillating at the 50 hertz which could be adjusted by manipulating the Brass diaphragm.
You can just see the saw blade tip at the top of the Magnets.
This is pulsed from a Signal Generator through the inside coil at 50/60 hertz.
Good luck with your research and builds.

Smokey

Hello! That you have built a generator Lester J Hendershot? Work????

Foto Lester J Hendershot - Generator. Replica by Arthur Aho:
https://disk.yandex.ua/public/?hash=...trIqlGjGrB0%3D
https://disk.yandex.ua/public/?hash=...5SLsIiyZ3dY%3D
https://disk.yandex.ua/public/?hash=...R2Zl9zijon4%3D

Lester J Hendershot - Generator. Replica by Arthur Aho. Please see this Document:
https://docviewer.yandex.ru/?url=ya-...c=52c80d52043e

Books Lester J Hendershot - Generator:
http://www.hyiq.org/Downloads/The%20...%20Mystery.pdf

http://www.hyiq.org/Downloads/From_T...Hendershot.pdf

Secrets Of Perpetual Power - Hendershot Mystery by Barry Hilton

Hendershot Fuelless Generator - Publications and Articles - En-Ro

Some Free Energy Devices eBook

The Manual of Free Energy Devices and Systems

http://www.rexresearch.com/hendershot/hendbsrf.pdf

1979 - Arthur C. Aho - Impuls Viu

[GSM]

There is something here we are missing and hopefully time will overcome.
Smokey

Hi David.

Lester was the only person who demonstrated these running.
Aho had one of Lester's 'runners' after he died, but never got it to run again.

Something missing ?
Could this have been some kind of ring magnet beneath each core in order to magnetically bias/polarise each assembly, and which Lester did not reveal to anyone ?

Cheers ............... Graham.

(What a truly excellent replication! What value is your core-cap ?)

[David G Dawson]

Hendershot Generator Review

Hello Graham,
Good thought and something I did not even consider - a possibility!
Home-made caps are 7800 pF, same as Lesters and are very close to his method of building in length and size so there we have a true replication which confirms his methodology.
The wooden paddlepop sticks are there for tuning purposes and works well as both can be made to equal capacity - this is a temporary setup and will be made more solid when we can get some action.

What this all boils down to is the basic 'start' function which I feel is Aether energy related and is applicable to not only Hendershot but also Moray, Bruce Perrault and his Ion Valve and many others and could be described as a 'heartbeat' as I feel this to be how this energy is manifested here in this dimension and what we are bodily in sympathy with which keeps us alive.
The Hendershot Motor Generator uses the same principle with the reed resonator which I have also replicated but this too should be functioning on its own from its Aether connection - that is what is missing in all of these organisations - capturing the elusive 'heartbeat'.
Building a new Crystal Set as a Moray 'front-end' and this is the next step as well as delving into his Motor Generator information.

N20Wolf,
The Ukranian information is new and appreciate the input - Thankyou.
And NO it doesn't work yet but is put aside and will get back to it when new information arrives - the heavenly input part.

Will put that all into a translated PDF and advise when done.
This is why I show the build with the pictures so that others may come in with new information and inputs are greatly appreciated.
Not happy with the schematics and they are also under review.

Much more happening in the Lab with Geiger Counters (Cosmic energy) and receiving on the Tesla Magnifying Transmitter.

Smokey

[GSM]

Hello Graham,
Good thought and something I did not even consider - a possibility!

Nor me until ten days ago, and I feel such an idiot for allowing myself to be mind-fuddled by those 'recording' Hendershots original work as written up by those who either did not understand, or were willfully creating misinformations via omission, or were willfully supporting the presently obnoxious governing and monetary taxing of humanity by telling outright untruths not only about Lester's Mk3, but about science itself, and especially electromagnetic field relationships.

Hi David.

You mentioned TH Moray amongst others. His generator funtioned via electromagnetic relationships too, and if you were to read very carefully his last published words you would find that he too stopped writing about an Aether related to his generator.
There is none.
I also realise there are many here who believe in an Aether, but such belief is only that - a belief without scientific proof, just like a religious belief in some false god being able to influence our real-world life.

From now on please think of your idea of Aether as what it really is - the all pervasive and three dimensional relationships between everything observable, such as matter, orbits, gravity, charges, fields, and not something magical beyond these.
Talk of, and authoritative writings about an Aether (Ether) is throwing the entirity of humanity's thinking way off-kilter.

Take a look at this -

July 2013 Rockwork 4 (Oregon Cliff) DU-DXpedition - YouTube

Just look at that for an inductor ! Their 'Q' can easily exceed 1,000.

The largest diameter FS-Loop I built was over 2ft in diameter, but it interacted so much with surrounding matter (including earth-ground) and it was so unweildy, that I dismantled it.
Conveniently sized smaller and more manageable versions work more than adequately.

David, I was impressed by your hands-on capabilities and that is my reason for contacting you here - to get your hands 'well grounded' as well.
Feel free to read up on my original texts about the FS-Loop antenna;-

The FS LOOP

(Yeah I know several links have since become broken, but then so have I, hence these are not a priority and they will have to wait.)

The final pic in that link shows a small (directional) SW antenna.

The final words on that long 'page' additionally cover 'professional' attitude (not much of it reported there), but the related communications were some of the nastiest I have ever received.
Maybe 'proffesionals' would never publish a text like that ?

Watch this video -

Wesley Gary Neutral Zone - Video Dailymotion

That near instantaneous field reversal within the rod is not Aetherial, it is the atomicly based electron orbits suddenly (transducibly) being *completely* reversed via a tiny motional shift, and this as the field intensity variation obliges the rod molecules to align up with either parallel or series electron orbit alignments, not just an intensity variation, as we are taught in college etc.
This was first discovered by Wesley Gary in the 1870's, and there is already the precedent of a Patent for his long forgotten entirely magnetic magneto-mechanical generator.

http://www.energeticforum.com/attach...ry80739563.pdf

So David, see the rod field 'flip' in my video.
Look at that FS-Loop. A ring of those rods.
Think of partial end biasing with a ring magnet.
Then energise a winding(s) on the end away from the magnet.
Think of the series-parallel magnetic 'flip' wrt. the magnet.
All without back-EMF or physical motion.
Think of the Hendershot sleeves in front of you.
Yes - resonated as he did with circa 6,800pf.
(There might be published lies about core material?)
Two alternating 'flip'-'flip' transducible fields.
Resonance and 'flip' frequencies must not interfere.

After additional critically positioned core magnets I wonder if you would have the similarly sharp wave impulse that Hendershot's original centre magnet-armature-'U'coils arrangement would have generated.
This too could have been a sharp series-parallel field reversal induction of current, and not just conventional square wave field inductions via overwinds.
You got decent spike pulse ?

Cheers ............... Graham.

[N20Wolf]

Hello Graham,
Good thought and something I did not even consider - a possibility!
Home-made caps are 6800 pF, same as Lesters and are very close to his method of building in length and size so there we have a true replication which confirms his methodology.
The wooden paddlepop sticks are there for tuning purposes and works well as both can be made to equal capacity - this is a temporary setup and will be made more solid when we can get some action.

What this all boils down to is the basic 'start' function which I feel is Aether energy related and is applicable to not only Hendershot but also Moray, Bruce Perrault and his Ion Valve and many others and could be described as a 'heartbeat' as I feel this to be how this energy is manifested here in this dimension and what we are bodily in sympathy with which keeps us alive.
The Hendershot Motor Generator uses the same principle with the reed resonator which I have also replicated but this too should be functioning on its own from its Aether connection - that is what is missing in all of these organisations - capturing the elusive 'heartbeat'.
Building a new Crystal Set as a Moray 'front-end' and this is the next step as well as delving into his Motor Generator information.

N20Wolf,
The Ukranian information is new and appreciate the input - Thankyou.
And NO it doesn't work yet but is put aside and will get back to it when new information arrives - the heavenly input part.

Will put that all into a translated PDF and advise when done.
This is why I show the build with the pictures so that others may come in with new information and inputs are greatly appreciated.
Not happy with the schematics and they are also under review.

Much more happening in the Lab with Geiger Counters (Cosmic energy) and receiving on the Tesla Magnifying Transmitter.

Smokey

Hello! Please do more photos of your generator. Everything must be done very accurately!!! Look at books, photographs generators by Lester Jennings Hendershot.
Russian forum:
Форум �транников :: Тема: Бе�топливный генератор Хендершота (37/37)

[GSM]

Hello! Please do more .....photographs generators by Lester Jennings Hendershot.
Russian forum: LINK

Hi Wolf.

Re your link. The centre series connected coils have a magnetic circuit.
The adjuster thereby moves both coils with respect to the 'buzzer assembly'.

Cheers ............ Graham.

[David G Dawson]

Wesley Gary Neutral Zone

Hello Graham,
The heavenly intervention?
Gee, you sound just like me!
Thankyou for your Post as you have highlighted certain organisations that I have also been messing with.
'The FS Loop' looks interesting as a Moray 'front-end' and interested in your other Antennas as well.
Interesting that you mention the signal from New Zealand being the loudest or easiest to receive.
Perhaps this is due to the fact that they are sitting right along a Tectonic Plate just as you are in Washington State and hints of a Telluric association - this from Eric Dollard on the RCA Bolinas antenna site.

Have been collecting TV neck Ferrites here as they have been used in the 'DLRainmakers' and also have them inside a Caduceus wire wrapped device called a TEG (Torsion Energy Generator) which was one of the devices I built as a one off and came out with all sorts of wierd phenomena, none of which I understood at the time - 'one-wire electricity' and 'cold electricity' to name just two.
What is it that you have packed in the centre of your Coil?
Have you considered a Caduceus wrap on your Inductor with a crossing angle of 22.5º and this from George Van Tassel via Eric Dollard?

Reading quickly your article and I see you also have recognised the ability of a Ferrite as some sort of 'collector'.
Not going to go into the Aether bit here as this is probably not what it should be called and we need to recognise more the 'Counterspace' phenomena where we are working in another dimension just as our Sun is and probably Jupiter too (nothing Nuclear here either).
I also use Ferrite Flybacks here in high voltage work and have also noted some strange phenomena with respect to remanance and note that they use a 1mm gap but not for here just now.

Reread Wesley Gary's Magnetic Motor and feel there to be a new understanding of how the device operates and most probably what Hendershot is also using as the BASE GENERATOR for developing a voltage and by nature of the organisation used, would be a reversing DC.
Looking for another word to describe this basic or beginning function.
The New York Times extract made me look differently at the entire construction of the device.
OK so this explains why it is not a voltage induced from outside but is developed by crossing the magnetic 'neutral zone'.
Can see why this has not been attempted as a replication as the thin horse-shoe magnets would be a difficult find today.
That being said I have here an Ericcson Magneto with thinner magnets and may pull that apart and conduct some experiments - the Western Electric also here are much thicker.
Will put up some more pictures as I think this is helping others in their own mind development of the devices we mention here.
In fact, I have already been asked to do just that and probably now understand the problem as below.

I got a wake-up call this morning from one of my other Forums and the person said simply that most people do not think they have the ability to proceed with any of these devices as they are lacking in build confidence.
This is one ability that has been taken away by the use of Computers where most young people only feel comfortable behind a keyboard and what a young person used to work on, like a car for example, has been taken away by 'progress' OR, they don't want you working on your car as you might just be able to get more MPG than designed - it's called control!
1986 Toyota Seca Hatchback - 35mpg, when I had finished I was getting 49.5 mpg - that's what you are missing!

OK, so in summary, will start a Wesley replication as that is what is missing and needs to be working and understood.
Will get back when I have read your material fully and greatly appreciate the information.
Thanks.

Smokey

[GSM]

Originally Posted by David G Dawson

Hello Graham,
The heavenly intervention?
Gee, you sound just like me!

When I saw that meticulous Hendershot replication I just had to reply.

See my picture response to Wolf.
His own link failed to illustrate the centre twin coils with magnetic coupling.

I downloaded an article with several other pics like that, and some are already in the other Hendershot thread I started, but I cannot find that file still published anywhere on the Internet.
The photos were amongst Dutch and English texts, and went by Internet file names of;-
"dHendershot in Farbe" .... also .... "Hendershot in Farbe".

Sadly my EnergeticForum allowance for uploads is near full and the file size is 3.7MB so no way I can upload.

After re-studying the pics it even looks possible that each core-cap-coil assembly could have a third connection at the bottom ? !

There was a comment that Lester used a separate hook-up wire to get his generator going, so was it somehow connected to these unmentioned terminations.

Thankyou for your Post as you have highlighted certain organisations that I have also been messing with.
'The FS Loop' looks interesting as a Moray 'front-end' and interested in your other Antennas as well.
Interesting that you mention the signal from New Zealand being the loudest or easiest to receive.
Perhaps this is due to the fact that they are sitting right along a Tectonic Plate just as you are in Washington State and hints of a Telluric association - this from Eric Dollard on the RCA Bolinas antenna site.

That was MW DXer extroadinary - Gary deBock in the video.
I live in Northern Ireland just outside Belfast.

Have been collecting TV neck Ferrites here as they have been used in the 'DLRainmakers' and also have them inside a Caduceus wire wrapped device called a TEG (Torsion Energy Generator) which was one of the devices I built as a one off and came out with all sorts of wierd phenomena, none of which I understood at the time - 'one-wire electricity' and 'cold electricity' to name just two.
What is it that you have packed in the centre of your Coil?
Have you considered a Caduceus wrap on your Inductor with a crossing angle of 22.5º and this from George Van Tassel via Eric Dollard?

The FS Loops have but air or plastic foam in their centres.

Reading quickly your article and I see you also have recognised the ability of a Ferrite as some sort of 'collector'.
Not going to go into the Aether bit here as this is probably not what it should be called and we need to recognise more the 'Counterspace' phenomena where we are working in another dimension just as our Sun is and probably Jupiter too (nothing Nuclear here either).
I also use Ferrite Flybacks here in high voltage work and have also noted some strange phenomena with respect to remanance and note that they use a 1mm gap but not for here just now.

'Aether' .. 'Counterspace' .. no matter what name
in that nothing happens in isolation -
always an equal but opposite reaction/response through space -
whether radial or directional in action -

but that term 'Aether' is by those who were lost for explanation of electromagnetic radiation, and because the 'teachers' do not want to reveal the Truth, the public is still being technically etherised.

Reread Wesley Gary's Magnetic Motor and feel there to be a new understanding of how the device operates and most probably what Hendershot is also using as the BASE GENERATOR for developing a voltage and by nature of the organisation used, would be a reversing DC.
Looking for another word to describe this basic or beginning function.
The New York Times extract made me look differently at the entire construction of the device.
OK so this explains why it is not a voltage induced from outside but is developed by crossing the magnetic 'neutral zone'.

I had that NY Times article copied on my computer.
Don't see it on the 'net now ?

Can see why this has not been attempted as a replication as the thin horse-shoe magnets would be a difficult find today.
That being said I have here an Ericcson Magneto with thinner magnets and may pull that apart and conduct some experiments - the Western Electric also here are much thicker.
Will put up some more pictures as I think this is helping others in their own mind development of the devices we mention here.
In fact, I have already been asked to do just that and probably now understand the problem as below.

I got a wake-up call this morning from one of my other Forums and the person said simply that most people do not think they have the ability to proceed with any of these devices as they are lacking in build confidence.
This is one ability that has been taken away by the use of Computers where most young people only feel comfortable behind a keyboard and what a young person used to work on, like a car for example, has been taken away by 'progress' OR, they don't want you working on your car as you might just be able to get more MPG than designed - it's called control!
1986 Toyota Seca Hatchback - 35mpg, when I had finished I was getting 49.5 mpg - that's what you are missing!

OK, so in summary, will start a Wesley replication as that is what is missing and needs to be working and understood.
Will get back when I have read your material fully and greatly appreciate the information.
Thanks.
Smokey

Yes David. We have generations following us who have been dumbed down by technological progress, highly controlled primary education and a tax system making employable adults so busy that young minds no longer receive adequate guidance and inspiration.

Thank you very much for your reply.

It is only when the magnetic field reversal fundamentals employed by Wesley Gary's type of generator are witnessed, that the necessary changes in mindset can begin to overcome those firmly already imprinted within us via 'peer' regulated 'education'.

As a next step, please try as I have implored thx1138 to do here -
Mr Lester J Hendershot's magnetic generator.

that energy does NOT come out of any Aether .................

Very Best Wishes ........... Graham.
.
Please do not mind.
I have made much effort in my own Hendershot thread, and so I have duplicated this post there too.
.

[thx1138]

Maybe NOT phone _ringer_ coils

Antique Telephone History Website

[David G Dawson]

The FS Loop & Probe Head

Graham,
Understand and know where I saw you before and it was at your Hendershot Forum.
Will go through your detail there and come back later.

Excellent work on 'The FS Loop' and you are to be commended on your analysis as I believe I understand most of what you have revealed, most won't have the faintest idea because they are missing the golden lifetime experience of all of this and you and I are just so lucky to have been an active part of it all in our working lifetime.

Will replicate your Inductor by using the TV neck ferrites as I have many here - was going to buy the rods but will do this first as I understand the principles and these have a centre hole as you suggest might be of benefit.
Other option here is to have the ring with a 1mm insulated gap to reduce the reluctance as in the Flybacks and worth doing as the necks are two halves clipped together and easy to manipulate.
I have many Coils here including a Tesla London Coil and your dialogue has given me ideas as to how to use these as antennas and will report back with what I find.

1N34 Probe Head:
The other thing that now comes into play is the twin 1N34 probe head (Germanium after Moray - 1N294A, 1N34A - large body Diodes preferred) I am using on the 'Tesla Magnifying Transmitter' (TMT) with 3,000 ohm high impedance Headphones.
Would be interesting to use this with your Inductor as with the passive TMT, if I touch the Extra Coil with the probe head, I can hear the Radio Station but I can also stand some 20" away and still hear the Station at equal volume in that I am radiating out from the Extra.
What this is telling me, is that the 'touch' mode is Transverse TEM and the space mode is Longitudinal LMD as the Station is being received by the Ground dipole and not the Aerial dipole of the transmitting antenna.
I go up to my fenceline with this probe and can hear the Station very clearly just by touching the wire or in fact anything of a metal nature in the yard - TEM.
This is also a bit scary as anything that is of a metallic nature is also an electromagnetic junky including the tin roof.



Uploaded with ImageShack.us

I would be interested as to what you hear from your Coil by contact or by space.
The capacitor is a Mica 500 pF.
All the best.

Smokey

[GSM]

Hi David.

That's an interesting reply, with obvious understanding. ( Think I know where the 'Smokey' ID comes from too - LOL ! )
I almost croaked it in Nov and am still recovering, so not yet 'hands-on', though when I am it will be more work with the Wesley Gary field reversal principles.

Longitudinal !!!
As Tesla knew, this could be so beneficial to mankind - if only .......
Its use to date though has brought nothing but sadness to my heart -
through the deaths of so many in the Twin Towers, followed by so many New Yorkers with cancer.

I have a Canadian type fully metal steel shed out in the garden, and sitting inside it is so electromagnetically quiet and calm -
so peaceful - just like our World once used to be, as in my younger years !

Good Luck with your new experiments ............ Cheers ............ Graham.