Yu oscillating Generator ... Overunity YOG Model

[Shamus]

Agreed, that was just brilliant. Echoing Matt's sentiments, I wouldn't mind seeing the magnet array design myself.

[WattBuilder]

Thanks Guys
Glad you guys like the video.
I don’t have much posted, but I am posting over at the OU forum too.

Attached is a drawing of the array. I do get resistance entering into the array. It’s the “little wheel big wheel effect”. Further adjustments on this will increase the amount of energy captured from magnets.

Also notice how I use the iron as a flux extension. The HJ banana shape brings the counter flux spin too close for my preference.

Howard

[Cloxxki]

Thanks Guys
Glad you guys like the video.
I don’t have much posted, but I am posting over at the OU forum too.

Attached is a drawing of the array. I do get resistance entering into the array. It’s the “little wheel big wheel effect”. Further adjustments on this will increase the amount of energy captured from magnets.

Also notice how I use the iron as a flux extension. The HJ banana shape brings the counter flux spin too close for my preference.

Howard

Hi Howard,
Are you associated with Roney? His today's video seems to hint of exactly the same flux dynamics. And, I seem sense a similarity some of what Lucian Stefan (so cryptically) wrote on OU.com about supposely surpressed Romanian (non)electric magnetic engines.

Is the gravitry-oscillator really a necessary part of your design?I cannot see how 360degree circular motion and momention could not subsitute the oscillator. I greatly under-estimated your array it seems (my sincere apologies), and now I wonder what I am missing about the pendulum. Is it to not draw too much attention? I'll then ease the above :-)

[WattBuilder]

Hi Howard,
Are you associated with Roney? His today's video seems to hint of exactly the same flux dynamics. And, I seem sense a similarity some of what Lucian Stefan (so cryptically) wrote on OU.com about supposely surpressed Romanian (non)electric magnetic engines.

Hi Cloxxki
I’m not too familiar with Roney’s work but I am familiar with shielding magnets. I don’t see the connection though. My flux dynamics was based on Howard Johnson’s work of magnetic vortexes.

As for Lucian Stefan, I don’t see the connection either. It would appear he is working on a rotary magnet motor.

Is the gravitry-oscillator really a necessary part of your design?

Yes, the features of the YOG make it possible to harness energy.

I cannot see how 360degree circular motion and momention could not subsitute the oscillator. I greatly under-estimated your array it seems (my sincere apologies), and now I wonder what I am missing about the pendulum. Is it to not draw too much attention? I'll then ease the above

Well, yes an no
Theoretically speaking a wheel’s movement can match a pendulum’s oscillating movement. When no kinetic energy loss is a factor.

It’s when the variables that come into play when applying use. That are not equal.

Basically factors that arise when using a rotary device to generate energy are not the same as an oscillating device.

Common mistakes that I notice is that some people tend drift to either a lever or pendulum or wheel. That throws them off.

It’s the combination of the features of the YOG happing all at once.
The key is not the array it’s just one part. The key is the YOG.

Howard

[WattBuilder]

Hi All,
This new array set up seems to out perform my previous array by about 6 inches. Its based on repulsive force is greater then attraction force.
I’m going to be switching over to this for future testing until better comes along.

Howard
My one cycle video YouTube - Yu Oscillating Generator Overunity model - one cycle demo extracting energy from magnets

[WattBuilder]

Hi All,

Here is an experiment method to prove the Yu Oscillating Generator achieves overunity.

This method is based on the YOG gaining kinetic energy per cycle as it absorbs the energy from magnets.

The illustration attached shows, cycle end points that starts from “A” to “H”.
Whereas “A” is the start point and “H” is the last “end stop” point.

Start at “A” and face the drive magnet to the array. Then lock it in so it does not turn as it makes a cycle pass.

When the cycle ends simply mark the point. It should be somewhere around “B”.

From there re-orientate the drive magnet to face into the array again and lock it in.
Release it at point “B” and it should end around point “C”.

Repeating this process until you cycle to “H”.

You should see the mark points get lower and lower and that the YOG gains energy, lifting the weight higher and higher.

The reasoning behind this test is that the release points of the next cycle have an increase of kinetic energy and potential energy from the magnetic array. Therefore it will add on top of each cycle.

After this experiment one may view that everything else to work out on the YOG is now Negligible. In that it is just now a matter of increasing the scale. Whether you’re working out the method to orientate the drive magnet or working out the load resistance of the turbine. The ability to scale just makes those issues too small to be a problem anymore.

So there you go! You just proved The Yu Oscillating Generator achieves overunity.

Try it and see.

Note: This test method has been confirmed on my test unit.

Howard
My one cycle video YouTube - Yu Oscillating Generator Overunity model - one cycle demo extracting energy from magnets

[WattBuilder]

@ All

Here’s my update.

I have now made the decision to put a hold on using the tail vane method to orientate the drive magnet. It’s taking me longer then I have planned. The things that I am running into going this route are lack of access to better materials and better tools.

I know that there are going to be some readers who will have a harder time understanding when I revert back to the use of the servo method.

The full understanding of the ability to scale and its effects is something that one may have to figure out. As my knowledge came from working in the field of the Automation Industry. I will do my best to help those understand.

For now I want to clear up the “step” function of my drive magnet’s position. Before I put up additional videos of the YOG.

You may have notice on my previous video that the drive magnet is offset from the centerline of the lever. The reasoning for that position is to allow for the step in a cycle to take place while also orientating the drive magnet. This function allows for “walking” or “climbing” how every you like to view it.

This makes it possible to add on top of the gain kinetic energy. Resulting in the lever getting lower and lower and the weight lifting higher and higher.

One can compare it to traveling up a flight of stairs or a truck bumper jack lifting a car.

It would be great if the magnetic array has a knob where you can turn up the magnetic energy for every cycle pass, but apparently magnets aren’t made that way.

The value of energy from the magnetic array is fixed. Depending on your array set up. So that’s why we need to add the “step” function.

Hopefully in the coming days I will be posting a new video where you can see the YOG in action with a servo.

Howard
My one cycle video YouTube - Yu Oscillating Generator Overunity model - one cycle demo extracting energy from magnets

[WattBuilder]

@All

Well …….. I’m done.

Here’s the gain proof video with servo.

YouTube - Yu Oscillating Generator Overunity model gain proof

The input is about 1.3 Watts for 2 seconds to turn the servo per cycle.
I used a Doc Wattson meter

The circumference that will drive the turbine measured about 343 to 354 Revs/Min. I started at the 10 o’clock position and let it swing one cycle. The tachometer used is an Ametek 1726 and was measured by placing the wheel on the meter up agents the circumference.


Howard

[Matthew Jones]

Thats pretty great... I can't wait to see it light bulb, while powering itself.

Have you got a trigger setup in mind for the servo?

Matt

[WattBuilder]

Thats pretty great... I can't wait to see it light bulb, while powering itself.

Have you got a trigger setup in mind for the servo?

Matt

Hi Matt,
Thanks, I'm at the turbine now trying build a low drag high output one. Those ironless axial flux generators are sure expensive. Kind of worrying about running out of room to the ceiling too.

For the trigger I was thinking about using a BasicStamp micro controller from Radio Shack it uses a 9v battery.


Howard
YOG Gain Video YouTube - Yu Oscillating Generator Overunity model gain proof

[Matthew Jones]

Do you think it would have to be taller to actually start generating?

I guess you gonna need a Hanger soon...


Matt

[WattBuilder]

A hanger ! dude your scaring me.
Hopefully not. I going to try to use a stronger magnet.

Howard
YOG Gain Video YouTube - Yu Oscillating Generator Overunity model gain proof

[WattBuilder]

Hi guys I’m just documenting this picture here on this post.

Howard
YOG Gain Video YouTube - Yu Oscillating Generator Overunity model gain proof

[synchro]

O.U. Servo.

A DPDT, double pole double throw reed switch on the pendulum arm with two trigger magnets at the ends of a cross bar let's say midway down, pole reversing a pulse powered solenoid attached to two 45 degree gears would be very efficent at snap turing the magnet anywhere you care to position the trigger magnets along the T bar, but after exiting the track. One coil, one battery. and one capacitor inseries to recover and feed the pulse back would be very efficient. A Joule theif charger could recharge the run battery, so the entire servo circuit could be self sustaining, without any additional output coils to run the system. These kind of gears can be found in toy construction kits like Erector and Leggo sets.

[synchro]

2 one way tracks.

@Wattbuilder.
Imagine the servo magnet comming through a one way track with your current servo package faceing sideways, then a second one way track going back the other way that the servo swivels into like a race horse rounding the club house turn at the race track, the magnet positioned 90 degress away from it's current position on the L shaped servo brace. This more then doubles the YOG's power, coupled with a pulse power recovery circuit. I can upload a simple sketch if my language alone dosen't convey the meaning. I wonder if additional tracks might help beneath and perhaps to the sides off a cross bar. Also they might be ganged up in tubes and nested like cigars, a radial with one flywheel.