Donald Smith Devices too good to be true

[tswift]

I must say I'm surprised with everyone here. A long-time forum member comes on with claims that he knows more about this technology than we do and nobody is interested or considers it worth their time to check it out? Funny, I thought science was about open-minded scepticism. If you are not willing to at least investigate overunity claims and learn more, then why are you even here? Personally, I am in contact with Paul and actively following up and learning more.

Let me tell you a story from my younger days as an engineering student. A professor told this story: in a class on thermodynamics, a professor gave a take-home exam. The assignment was to figure out how long it would take for a 5 pound beef roast to reach 160 degrees in a 350 degree oven. One student took the experimental approach: he bought a roast and a thermometer, and cooked it. A second student took the mathematical approach: accounting for conduction, convection, and radiative heat transfer, and thermal conductivity and diffusivity in the beef, he calculated how long it should take. The third student? The third student called his mother.

In all likelihood, all three students got an acceptable answer. Which one did the least work to get it? Obviously, the third one. My point is, if someone knows more than you then the fastest way to gain knowledge is quit talking and start listening and learn from them....

[soundiceuk]

Hi folks!

Here is some never heard before Don Smith material.

http://www.radioionics.com/audio/DonSmithIW2003.mp4


Unfortunately as I have previously wrote a number of times. Don had lost his marbles and kept making crazy power claims that were never proven!

65,000 watts output this time with a "dipole transforming generator".

Bruce recorded Don's words and quietly listened to humour the poor old guy!



Anyway, on a different note, we have a real modern Tesla and that is Bruce!

I've been chatting with Bruce now for over 4 years and the information that has been disclosed to me totally blows my mind!!!!

Bruce knew Don had lost his marbles but the two of them had great respect for each other and remained friends until Don's passing.


Bruce first met Don at the 1996 Tesla symposium that you will all be familiar with!

Bruce knew by watching Don's suitcase demonstration that the batteries could not have sustained those bulbs by using conventional energy.


[VIDEO]https://www.youtube.com/watch?v=43hted5YTCw[/VIDEO]

This is a great replication, but just like Don's suitcase device the bulbs are lit by high frequency, which gives off a totally different brilliance of light compared with low frequency or DC.

Hence the ultra low power consumption.


Here is Bruce's final disclosure before working prototype pictures and videos are released.

http://www.radioionics.com/pdf/v5.4....0edition-D.pdf


Once the facebook page reaches 1000 likes we will release pictures of a working unit.

PLEASE "LIKE" & "SHARE"

https://www.facebook.com/Solar-Energ...homepage_panel


It gets MUCH better than this! I wish I could spill my guts, but you wouldn't believe me!!!!!



I PROMISE this is genuine! I wouldn't waste your time or my time! We havn't got time for that!


Bruce was previously using radioactive material and that was a stumbling block for the technology.

This has been replaced by using high voltage and zero (next to zero) amps on the antenna.


What are we going to do when we have the ultimate energy source (Radiant Energy) in our hands?

Have a guess and I'll tell you if you are right!

[med.3012]

Completly agree with the way you think Med!

a day or another some people will leave this thread for any reason including life problems.. this site give a great opportunity for collective work but the time goes without significant progress ... the time is the most valuable gift that must be exploited
effectively if we really want to be Tesla grandsons..

[marathonman]

D Smith or Tesla

I have a 3 inch diam Barker and Williams coil, a 12 volt 7.5 thousand volt 29.6 kilohertz neon sign transformer and a 9 thousand volt TESLA coil transformer from Amazing 1 for sale if any one is interested please pm me. plus a 10,000 v0lt and 15,000 volt caps.


MM

[Wistiti]

this project took a long time without significant results at least in global point of view where anyone around the globe can replicate the device and benefit an endless electrical power, a lots tried to bring the technology to the public without significant success .

now it's the time to put hand in hand to enrich this thread once again, i don't think it's so difficult to make a working device we only need to help each other, in this case we encourage people with brilliant idea to participate and share their work. i am here listening

Completly agree with the way you think Med!

[tesluh]

I cut apart a coolneon brand like this Strong NEON sign TRANSFORMER 8.000 v volts 8KV 8000v 30ma UL power supply NEW | eBay
they are potted but I was able to get to the center tap wires on the output. I don't know if removing those wires from the circuit board to tap them will disable the unit (open circuit/short circuit/gfci) but I might try it and see. The evertron with the air vents on the sides are not potted.

I got an imported nst from amazon that has a ground tap already in place and ruined it, going to get another and try it again wired differently this time.

[med.3012]

Exactly what it says.

So let's turn that around. If you have built Don's circuit or studied it you will be in a great position to diversify to the next phase.

You will likely have an earth ground, experience of winding coils and some high speed diodes. This puts you in a good position to build a solar energy generator.

It could be called all sorts of names: radiant energy receiver/converter, ion receiver/converter etc.

The name was chosen because it is more easy for the public to understand.

this project took a long time without significant results at least in global point of view where anyone around the globe can replicate the device and benefit an endless electrical power, a lots tried to bring the technology to the public without significant success .

now it's the time to put hand in hand to enrich this thread once again, i don't think it's so difficult to make a working device we only need to help each other, in this case we encourage people with brilliant idea to participate and share their work. i am here listening

[jim glinski]

work around

I'm looking at the solid state one's the hi freq hi volt units like the one's don used be for they were touched by the federal government and made unusable for the sake of safety. Some have recommended them but failed to relate how? Thank you for your in put if I find out how I will post it for your consideration. Jim

[tesluh]

are you talking 60hz steel boxes or 35khz plastic solid state? I read an article on removing gfci from modern 60hz ones here though I am not sure it will work for this device Building a Tesla Coil In 9 Easy Steps! Today I got a couple of junk modern evertron nst's from a sign shop, they have air vents on the sides and are not potted. I was able to open them up and locate the center tap on the secondary.

[jim glinski]

Hi frequency hi voltage neon transformers

Hello gents
I have a question how do you over ride the safety on the neon transformers several people I know would like to use them but shut down buy the safely.? Any ideas ? Thank you for your time jim

[soundiceuk]

so what's this ?

Exactly what it says.

So let's turn that around. If you have built Don's circuit or studied it you will be in a great position to diversify to the next phase.

You will likely have an earth ground, experience of winding coils and some high speed diodes. This puts you in a good position to build a solar energy generator.

It could be called all sorts of names: radiant energy receiver/converter, ion receiver/converter etc.

The name was chosen because it is more easy for the public to understand.

[Solarlab]

soundiceuk - re: your Solar Energy project.

F. Y. I.

Hello Mr. Townley,

With respect to your Solar Energy project - One method of gaining exposure and credible peer reviews is to prepare and submit your discovery/invention to the NASA Tech Brief's "Create the Future Design Contest." This event runs yearly with a closure date around July 1st. Here is the link for their 2016 submissions:

Home :: Create the Future Design Contest

They generally open new contest submissions several months before the July submission deadline so I suspect they will do the same next year. It's an excellent opportunity and may well prove to be a good exercise in organizing, documenting, presenting and validating your "Solar Energy" ION system.

Good luck and have a great day!

FIN

[med.3012]

I normally don't check this thread.

Don't start BS rumours that I'm Zilano!


I helped the thread at one point as much as I could by getting involved in the research. My conclusion was Don had lost his marbles.

I'm not here perpetuating the thread anymore as it's not worth any more of my time.

Good luck but I sincerely doubt any of you are going to achieve anything apart from spending your funds.

Even Dynatron still hasn't got any further with the tech. I checked a Russian forum and translated it.

It's a shame as the exotic builds and components led us to believe Don had something special.

so what's this ?

[soundiceuk]

Hi everyone, I've decided to post this in this thread, as it was this thread that changed my life and ultimately provided me with this information.

A little history.

I came onto Energetic Forum over four years ago knowing very little about energy.

I had 10+ years knowledge of auto-electrics so at least I had a clue.

I found Energetic Forum purely because I was researching Nikola Tesla and I believe it was Imhotep's Radiant Oscillator that led me here.

I joined this Don Smith thread near the start and became obsessed with searching for the solution to our energy needs.

I started my own forum and hand picked replicators and theorists to participate with Don Smiths ideas being the main focal point.

There were some really talented guys in the group. The mains ones that shone were called Dragon, Altrez, Dynatron and Romero. There were others. Sorry if spellings are wrong it's been a while.

I became associated with one of Don's friends. It was through him I was able to produce material which no one else had.

I still have Don Smith material that hasn't been seen here before.

To be honest it's pointless sharing it as Don's friend has finished the puzzle that Don Smith started.

This includes solving what radiant energy is, where it comes from, how to obtain it and how to build a circuit that advances Tesla, Moray and Don Smith's work.

Wardenclyffe was a ion receiver and transmitter using Schumann resonance. It did have a detector and it is missing from Tesla's patent. It is in one of his rare papers. I think very few connected the dots.

Moray's circuit was an ion receiver and not a transmitter.

This is ultimately what Don Smith was working towards.


I appreciate everything Aaron and Peter have done to make this forum what it is. I wouldn't have discovered this information without the Energetic Forum platform to meet the folks that use it.

Soon I'm going to be asking someone from the energy community to come to UK and validate a third party validation of the technology and make footage to be released here.

Names that spring to mind are Aaron, Peter, Eric Dollard or Jim Murray.

There are others but I've not personally followed their work.

I can only do one plane ticket though.

Any of you can think this is BS. I wouldn't blame you. This is why I would like one of those guys to give there expert opinion. Free trip to UK.

All I can say is this is the key we've all been waiting for. The road to powering buildings and transport with radiant energy. This was Tesla', Moray's, Don Smith's and probably the vast majority of your dreams. It is completely mine.

God knows why I'm in this position to bring you this information.
I hope you will join me for the ride.

If you want to get involved please like and share our page.

https://m.facebook.com/Solar-Energy-...0427302531276/

Once the page has received 1000 likes. Photos of a fully constructed unit will be revealed.

There are a few teaser shots on the page.

The technology will be validated LIVE on Facebook with one of the above names or someone else highly regarded.

Let me know if you are interested in replicating by PM and I will send you the theory, circuit diagram and components list.

Best regards to all,

Paul Townley
Plymouth, UK

[tesluh]

Also for the above schematic, what kind of bridge rectifier would be appropriate?

Guessing it would be 5-10kv in, not sure yet what frequency or speed would be required. I have 4 pcs of 20kv diodes but cannot find the speed anywhere and would rather have a single unit with screw terminals instead of a messy pile of wire with spade connectors. All of the high voltage ones I have seen look too small and not appropriate for high voltage.