Donald Smith Devices too good to be true

[med.3012]

Med.3012:
Ok, I corrected my comment about the output of Poma's device to 4000 watts. Thanks.
You can obtain ferrite from old monitors or tv to use as we have for the Ruslan/Akula replication. Or ferrite from the Tv flyback cores. For free.
However, Poma's device is just using simple air cores, and still has at least as high an output as ANY of the other guys.

Here is a video of my current build. Although I'm still working on it, so it's not a done deal. I'm trying to find how Poma does what he is showing in his video(s), in my own way. While waiting for some parts to continue on with the Ruslan replication.

https://www.youtube.com/watch?v=mpS7noQZ7DQ
Nick_Z

Nick_Z

interesting video, i agree the ferrite is available everywhere and very cheap sometimes for free , but the shape isn't optimum because it's designed for other purpose other than free energy generation, Flyback ferrite is very small to work with, TV yoke isn't the best in my device, still small size, but i am thinking about some new circuit and new optimization , sometimes it's a good idea to work in low voltage and see what's going on, this is safe and work fast .. in high voltage the work is slow ... i think we are at the same level of progress :-) Good work


Mohamed

[Nick_Z]

Med.3012:
Ok, I corrected my comment about the output of Poma's device to 4000 watts. Thanks.
You can obtain ferrite from old monitors or tv to use as we have for the Ruslan/Akula replication. Or ferrite from the Tv flyback cores. For free.
However, Poma's device is just using simple air cores, and still has at least as high an output as ANY of the other guys.

Here is a video of my current build. Although I'm still working on it, so it's not a done deal. I'm trying to find how Poma does what he is showing in his video(s), in my own way. While waiting for some parts to continue on with the Ruslan replication.

https://www.youtube.com/watch?v=mpS7noQZ7DQ
Nick_Z

[Utopia Now]

Magnet Field lines of opposing magnets and attracting Magnets

Hallo Guys I found this video on YouTube, about magnet field lines shown on an old TV like Floyd Sweet also showed in one of his video`s.
https://www.youtube.com/watch?v=EYf_7VRrYeU


Very interesting to see the round Bar Magnet inside the ring magnetron Magnet.
At the end of the video you see them together in a split screen view.

[med.3012]

med.3012:
There is no more info on that device that I know of.
Although we have been discussing it at OU.com under the Dally thread, there are no replications of that device to date. Not all is being shown.
So we have been trying to find what we can about it.
There are no other devices similar to it, either, which are self running from a simple Kacher circuit to provide up to 4000kW output.
So, it's still worth looking into it... unless we find that it's also a fake.
But, I hope that it's not. As it gave us some hope.
That's all I can say for now.

NickZ

i hope so too, most OU devices look like enigmatic especially motionless generators that provide huge power, i understand you mean 4000W not 4000KW

if this device is true it will be superior compared Don Smith device since we don't need an output transformer.. in my opinion it's better to follow what we understand and let what don't .. this is for me of course but it's good to look into other interesting device.

replication is the big problem because most open researchers in this field will face a lots of problems, the lack of resources for example .. but the situation now seem to be good due to the internet where we could share our thinking very easily but not everyone will post his success even if the first idea is yours !

about me nothing exciting is happening, i stopped the experiment until i find a good ferromagnetic core, Metgals is the best, you can make the desire shape with easy but it's very expensive and not available in all the world , the ferrite is available but it come with small size even there's some easy way to make the desired shape using the cement , just mixing the crumbled ferrite plus the cement and some sand ... after that you could use the polyester resin over it and finally you have what you want! this is my plan to make the ferrite core i need, this is the most easy and cheap method

the process can be enhanced according your skills.

[Nick_Z]

hello NickZ,

just some questions, did you tried this circuit ? if so can you please provide more info ?
in this field we absolutely need more details , any more details will be welcome , otherwise i think there's a link to overunity.com to this special construction ?

med.3012:
There is no more info on that device that I know of.
Although we have been discussing it at OU.com under the Dally thread, there are no replications of that device to date. Not all is being shown.
So we have been trying to find what we can about it.
There are no other devices similar to it, either, which are self running from a simple Kacher circuit to provide up to 4000 watts output.
So, it's still worth looking into it... unless we find that it's also a fake.
But, I hope that it's not. As it gave us some hope.
That's all I can say for now.

[med.3012]

hello NickZ,

just some questions, did you tried this circuit ? if so can you please provide more info ?
in this field we absolutely need more details , any more details will be welcome , otherwise i think there's a link to overunity.com to this special construction ?

[med.3012]

Ok,
Sorry to hear that you see nothing interesting in Poma's device.
4000w output, from a simple Kacher circuit and a few coils.
Nothing special?

For anyone that may be further interested, here is a diagram, and also wiring diagram. For free.
He has three videos out. Only his latest video (pic below), the same one that I had previously posted, is a self runner.

BTW: That's not a car ignition coil (blue cylinder). It's called a "Sumator".

There are no other circuits that are easier to build, using no complex components, and still producing several kWs from a simple Kacher circuit,
shown anywhere up to this date.
NickZ

Thanks so much for providing your kindly information, i am interested about this technology, i am just busy with my device and should be easy also maybe more easy than what you post.


thanks once again

[Nick_Z]

I just watched this video https://www.youtube.com/watch?v=RUF7eJAOjF4 nothing interesting in it just a high voltage transformer as car ignition coil and two set of coils, it's Russian and the translator gave me this Removing the power from the coil Kacher - Tesla working

in my design i am a little bit late but some friend are working in it, it's not the work for someone alone as you know generating the ideas and doing the experiments together isn't easy... we have to work together to see something significant otherwise only claims as the above video !!!

Ok,
Sorry to hear that you see nothing interesting in Poma's device.
4000w output, from a simple Kacher circuit and a few coils.
Nothing special?

For anyone that may be further interested, here is a diagram, and also wiring diagram. For free.
He has three videos out. Only his latest video (pic below), the same one that I had previously posted, is a self runner.

BTW: That's not a car ignition coil (blue cylinder). It's called a "Sumator".

There are no other circuits that are easier to build, using no complex components, and still producing several kWs from a simple Kacher circuit,
shown anywhere up to this date.
NickZ

[Gedfire]

This?

Another video from him:
https://www.youtube.com/watch?v=zrvAvp_dmlU
gricroma30@gmail.com
Asked him for schematic and he replied:
3000 евро
(means Euros)

https://www.youtube.com/watch?v=0JJOJl9dU0Q ???

[med.3012]

Another video from him:
https://www.youtube.com/watch?v=zrvAvp_dmlU
gricroma30@gmail.com
Asked him for schematic and he replied:
3000 евро
(means Euros)

Good video indeed no comments ...

[EMCSQ]

Another video from him:
https://www.youtube.com/watch?v=zrvAvp_dmlU
gricroma30@gmail.com
Asked him for schematic and he replied:
3000 евро
(means Euros)

[med.3012]

I have not seen OU on any scale, produced on this thread by any poster, here.
Which is the circuit that you think gives OU on a large scale.

This video below is the one that I've seen that provides for OU on a large scale, as well as self running. It's also very simple to build, if only all the missing information was given. As always, there is some missing information to be able to fully replicate it.
What is the needed and missing info?
Ideas???

https://www.youtube.com/channel/UC8f...HyD8BbUigXubmA

I just watched this video https://www.youtube.com/watch?v=RUF7eJAOjF4 nothing interesting in it just a high voltage transformer as car ignition coil and two set of coils, it's Russian and the translator gave me this Removing the power from the coil Kacher - Tesla working

in my design i am a little bit late but some friend are working in it, it's not the work for someone alone as you know generating the ideas and doing the experiments together isn't easy... we have to work together to see something significant otherwise only claims as the above video !!!

[Nick_Z]

I have not seen OU on any scale, produced on this thread by any poster, here.
Which is the circuit that you think gives OU on a large scale.

This video below is the one that I've seen that provides for OU on a large scale, as well as self running. It's also very simple to build, if only all the missing information was given. As always, there is some missing information to be able to fully replicate it.
What is the needed and missing info?
Ideas???

https://www.youtube.com/channel/UC8f...HyD8BbUigXubmA

[med.3012]

But, the main trick is to feed the 12v- 24 output back to the input, to allow for self running. I don't see that in the schematic. And without it, what's the point?

in these experiments the main purpose is to achieve over unity in large scale, so there's a lots of variables that must be optimized together for optimal output, starting from the input power the capacitor used , the volume of spark gap, the resistance of L1 , the current circulate , the magnetic flux in the primary, the coupling between L1 and L2 and the kind of that coupling, the resonance if we achieve this or no, the electromagnetic feedback, air ionization and the quality of ground, the wire section used in L2, the voltage generated in L2 also and the way to handle this ....

as you see there's a couple of parameter must be organized !

[Nick_Z]

But, the main trick is to feed the 12v- 24 output back to the input, to allow for self running. I don't see that in the schematic. And without it, what's the point?