Donald Smith Devices too good to be true

[BroMikey]

Marc Belanger5 hours ago
thank you everybody for the compliments , it's been a long time and waiting for this moment so hopefully somebody may want me speak at a Tesla exotic energy convention about the continuing study of this technology because I'm not really sure if anybody else is ever replicated this or found out why the system even works. I'd be more than happy to go over with a group of people and show my device but at this point I need funding to move forward and as soon as I get a thousand subscribers I can request for it. I think this is an answer to a lot of questions and an answer to the energy crisis that we have going on right now which is a direct result of the ongoing suppression that makes every single one of us pay for no reason. I think if this was marketed with a lack of greed meaning that if each generator was affordable and sold for 4 or $5,000 then each and every home in the world would be able to afford electricity without paying a monthly bill. the cost that I just stated will put people to work making the devices and it would cover all costs associated with the research and development of larger devices. I very much so would like an investment opportunity so if there is an investor that is looking to buy into my version of this technology I'd be more than happy to assist bringing it to the market. I will sign agreements however since I have a unique design here I would make sure that these devices could never be sold at a scalped rate or for any type of monthly charge the unfortunate part would be if government would stop this. I am willing to start overseas with this and hopefully the US will allow this to happen because it is an American design an American engineer Ed. I do not think that $5,000 per unit would be too much money to ask for because the business that would be making them needs to cover overhead costs and research and development costs of newer better units. I know that there would be millions and millions of people that could not build or get these units to function so they eventually would have to be marketed and manufactured in some way shape or form. since I rediscovered how this all works I do feel that I should be a part of it. I'm not asking for billions and billions of dollars I'm merely asking to be taken care of for the rest of my life so I don't have to struggle any longer. I spent a lot of money and my time on my projects and have blown my entire retirement fund. I think this the least that can happen

[BroMikey]

Real working free energy device Don Smith

[VIDEO]https://www.youtube.com/watch?v=fIrBYMHtq3M[/VIDEO]

[VIDEO]https://www.youtube.com/watch?v=QHOrVQynuec[/VIDEO]

Published on Feb 26, 2016

The video shown is not intended to be duplicated as it is dangerous. If you decid to replicate my work, it is solely at your own risk and I am not responsible whatsoever for injuries or damages, fatalities, fire, or any other kind of property damages. The device seen uses deadly high voltages and is shown for educational purposes only! --------- I've studied and have finally figured out how the Smith phenomenin works! It is very real, and it is based upon the works of Tesla. DO NOT WASTE YOUR MONEY BUYING ANY BOOKS BASED UPON THE SMITH GENERATOR, THEY DO NOT SHOW YOU THE REASONING HERE. THIS IS A WARNING THAT YOU WILL BE RIPPED OFF UNLESS YOU LISTEN TO ME. THE ONLY CIRCUIT YOU NEED IS WRITTEN IN THE COMMENT AREA BELOW. LOOK FOR THE LINK PLEASE, I AM GETTING TOO MANY QUESTIONS AND SOON WILL NOT BE ABLE TO HANDLE THE ANSWERS! NikolaTesla did figure this out, and the reason why I call it free is because it costs no money after you buy the devices needed in this video.. The transformer used is not needed, it can be an automotive coil, or a zvs, or nst, solid state or wire wound, no matter. There are subtractions to the schematic, thats all, you just have to look at my system closely!! The circuit loops and will not kill the battery while it runs both the NST and the light bulb. I will build more and make them very big to power very large loads, however, so far it doesn't seem to have any limitation if you use huge caps and giant inverters, anybody can make these and have completely free electricity. Nothing kills the battery, nothing kills the output energy. NOTHING ! Oh, it's free because you don't have to.pay by the kilowatt! I will be next making mobile systems as soon as I can get the aerial grounding licked. If you decide to replicate, it's done at your own risk, I will not be responsible for errors made on your part, this is extremely dangerous, can kill you.

Marc Belanger1 hour ago
+Fer ja you have to look at the components in my video closely and follow the diagram. here's the digram I worked from..
http://i1108.photobucket.com/albums/...tics2012-3.jpg
It's difficult, but, when you play with it, you'll eventually get it. Minor changes need to be made. I can't say too much because this system is protected, however, the method is easier than what's seen. be very careful, this is dangerous and contains high voltages that can kill you if you cross the capacitor or output and the high voltage.. this is entirely your own responsibility, so do this at your own risk. The output is very sensitive and could easily break the inverter. It is highly recommended to use an older unprotected inverter that is NOT protected against a loop. Some inverters shut down when the input and output are looped, even if diodes are used. Don uploaded the schmematic online himself, so, I'm not sure if any protected secrets are shown, however, the effect does use one of Tesla's most effective phenomenon that does disturb the ambient and it literally mirrors the output, forcing it to lay out ripples of energy, as if somebody dropped a stone in still water. Once this is done, instead of one ring of energy, you get many mirrors of the same force of energy in many ripples. We are gathering those ripples for each pulse of energy given, and, the ripples are being collected magnetically, induced backwards by the transformer, initiating an unknown type of energy to science, or use of a scalar wave that is creating an overflow of energy. So, what we give it in comes back many times, and, the larger the load, and larger the storage banks, the larger it's capacity. This can be replicated with low voltages too, it just works without keeping the components close when we use high voltages

Published on Feb 20, 2016

This is a video.showing us how and why this circuit operates as well, how we calculate the components and frequency.

If you guys have questions, please send a message and I'll try to.reply.promptly. I do not reply to skeptics. I.have a fully functional system, and the technique in this video.shows how to do.this, however, I highly recommend you guys all visit amazing.com to purchase a non protected , center tapped wire wound NST to make this work. To create the high frequency needed, you'll have to design a solid state oscillator circuit, or, but their high voltage power supply that offers variable frequency so.it's easier to.adjust. this is Dons easiest circuit that can be built with very minimal experience. I warn you all that if you.build any form of high voltage experimental system based upon my video, you are responsible for your own actions. This circuit is lethal, so, build it responsibly if you wish, and use protective high voltage rubber gloves. This will kill you instantly, so, you are absolutely out of your mind to even try building this if you.have no experience with high voltage power line installations. This is not low voltage high amperage or high voltage low amperage.. the result of a correctly build circuit is high voltage at high amperage which can kill by.getting close to the capacitor terminal or it's output.

I built this system because I have much knowledge in electrical systems, am knowledgeable in electrical safety, have years of experience with conventional electrical systems, experimental, resonant systems, have a degree in computer electronics , and, I am a licensed high.voltage contractor with over 20 years experience, as well hold many completion certification s in my industry.. I do care about the wellbeing of people who try to build my circuits at home, as well as folks that try other peoples hazardpus circuits. High Voltage energy derived from an NST alone normally would not injure people terribly, however, once an inductance, large capacitance , or resonant tank circuit is energized with high voltage a Ferro magnetic response happens giving an incredibly dangerous amperage and a massive difference in potential to ground. If one touches or comes close to touching these circuits, an arc can connect to.the hand, through the chest, and out whatever is close to ground. Even through a rubber shoe sole, high amperage, high voltage just devastatingly blows limbs off and kills instantly. This is awful when people get between an unknown power level so.I.must warn you.all to be extremely careful as I.Will not be responsible for your ignorance to listen to my warnings. This energy kills instantaneously.. I am not kidding whatsoever!

Marc Belanger2 days ago
+Fer ja you can add a capacitor to get resonance, however, it has to be an AC capacitor, not electrolytic or polarized! Dc capacitors will go BOOM! Anyway, if you have an inductance meter, you will have to test the inductance of the coil before trying to get resonance. If you are using a core, the coil will need to be on the core. The core will massively increase the inductance, then, you go to this link : LC Resonance Frequency Calculator - Ekswai use the bottom calculator table and enter your inductance as it is , select the range, then, enter the frequency. The calculator will give you the capacitor size needed to get resonance at that frequency. Then, put your coil and cap together in either series or parallel, it makes no difference, and test the coil with a function generator and oscilloscope to see if the amplitude is highest at the frequency you wish. If it is not, you will have to either add or subtract capacitance so it is definitely at it's highest point at the frequency you wish. If you use the cap in parallel, you will have a higher "Q" rating of the coil. If you use series, it negates the "Q" factor, so, I recommend for a primary coil at the feed side nearest the source you use parallel cap and coil. After the secondary coil, it is always advantageous to use series for resonance.

In Barbosa and Leal's device, be very careful not to be tricked into using this. It doesn't magically draw electrons from the ground. It connects the neutral of the line in to the source's neutral through the ground. You can easily figure this out by following the line schematic. The ground is very conductive, and, everywhere in the world, the center tap of the power company's transformer is grounded. This center tap is the system neutral which the energy needs to return on. Be very careful you do not run your home on this method because the ground isn't as good of a conductor and it will have low voltage, possibly burning out expensive devices in your home or causing fire. The ground replaces the neutral in the barbosa device, and, it bypasses your electrical meter, cheating the power company. If you build a device like this that does not use the power company's circuit to feed it, then, it may give something, but, i do not recommend you do what everybody is doing in Brazil if you value your television and computers or other components that need normal voltages.

The other thing they do that makes folks think it produces high amperage is that the transformers they build are bucking. This means they drop the voltage by putting only 2-3 turns on the secondary. When this is done, the voltage drops to 2 or 3 volts and the amperage climbs to hundreds of amperes. They then tie the hot leg to the shorted secondary coil and it makes people think they are getting 240volts at hundreds of amps. The line that has the hundreds of amps isn't what is operating your electrical panel., it is the feed line's hot leg, and., the ground is the return, back to the utility pole, so, if you cut the ground line on the pole., ,the "barbosa and leal " device will stop working and no energy will flow at all!

I am extremely surprised this has not been caught by Brazilian officials and they did not get locked up in prison yet. In the USA, they used to only monitor the neutral line with electrical metering, but, they stopped because folks used to punch a ground rod in the ground, then, disconnect the incoming neutral line at their electrical panel. The electrical neutral would flow through the ground, but, when high amperages flow through the dirt, it gets dry and starts to get lower and lower voltages, so, it is not recommended because amperages climb when the resistance climbs and voltage drops, causing the wires to heat up and burn, as well as your appliances! Good Luck! I will keep posting until you all have something to work on that functions to assist you all. I have many devices that work to make free energy.. I am trying top perfect one that I don't have an investor funding like Pelex!

[fer123]

Hi everybody Marc belanger was talking more about don smith generator.

Fer ja
Hello marc, I am replicating the system barbosa leal for while, you mention the voltage are not so important, I have my zvs induction heater connected to pankake coil after by induction to bifilar coil with 240v out can it work if I try to find resonance connecting to capacitor and resistor? after I''ll try to lower the frequency whit varistor to ground and connected to oscillation transformer and find 60 hz? Thanks a lot.
Reply
Marc Belanger

Marc Belanger
+Fer ja you can add a capacitor to get resonance, however, it has to be an AC capacitor, not electrolytic or polarized! Dc capacitors will go BOOM! Anyway, if you have an inductance meter, you will have to test the inductance of the coil before trying to get resonance. If you are using a core, the coil will need to be on the core. The core will massively increase the inductance, then, you go to this link : LC Resonance Frequency Calculator - Ekswai use the bottom calculator table and enter your inductance as it is , select the range, then, enter the frequency. The calculator will give you the capacitor size needed to get resonance at that frequency. Then, put your coil and cap together in either series or parallel, it makes no difference, and test the coil with a function generator and oscilloscope to see if the amplitude is highest at the frequency you wish. If it is not, you will have to either add or subtract capacitance so it is definitely at it's highest point at the frequency you wish. If you use the cap in parallel, you will have a higher "Q" rating of the coil. If you use series, it negates the "Q" factor, so, I recommend for a primary coil at the feed side nearest the source you use parallel cap and coil. After the secondary coil, it is always advantageous to use series for resonance.

In Barbosa and Leal's device, be very careful not to be tricked into using this. It doesn't magically draw electrons from the ground. It connects the neutral of the line in to the source's neutral through the ground. You can easily figure this out by following the line schematic. The ground is very conductive, and, everywhere in the world, the center tap of the power company's transformer is grounded. This center tap is the system neutral which the energy needs to return on. Be very careful you do not run your home on this method because the ground isn't as good of a conductor and it will have low voltage, possibly burning out expensive devices in your home or causing fire. The ground replaces the neutral in the barbosa device, and, it bypasses your electrical meter, cheating the power company. If you build a device like this that does not use the power company's circuit to feed it, then, it may give something, but, i do not recommend you do what everybody is doing in Brazil if you value your television and computers or other components that need normal voltages.

The other thing they do that makes folks think it produces high amperage is that the transformers they build are bucking. This means they drop the voltage by putting only 2-3 turns on the secondary. When this is done, the voltage drops to 2 or 3 volts and the amperage climbs to hundreds of amperes. They then tie the hot leg to the shorted secondary coil and it makes people think they are getting 240volts at hundreds of amps. The line that has the hundreds of amps isn't what is operating your electrical panel., it is the feed line's hot leg, and., the ground is the return, back to the utility pole, so, if you cut the ground line on the pole., ,the "barbosa and leal " device will stop working and no energy will flow at all!

I am extremely surprised this has not been caught by Brazilian officials and they did not get locked up in prison yet. In the USA, they used to only monitor the neutral line with electrical metering, but, they stopped because folks used to punch a ground rod in the ground, then, disconnect the incoming neutral line at their electrical panel. The electrical neutral would flow through the ground, but, when high amperages flow through the dirt, it gets dry and starts to get lower and lower voltages, so, it is not recommended because amperages climb when the resistance climbs and voltage drops, causing the wires to heat up and burn, as well as your appliances! Good Luck! I will keep posting until you all have something to work on that functions to assist you all. I have many devices that work to make free energy.. I am trying top perfect one that I don't have an investor funding like Pelex!

[BroMikey]

Hi Med

Here is an additional entry from an experimenter who has
been able to replicate Don S. device once. The repeat
replication is turning out to be his latest.

I will buy one from you Marc That's one.

Here is Marc

Marc Belanger 7 hours ago
Hey Mikey,
I too started with Don's original pdf, however, I do not totally agree
with a few things, one of them being the calculations because
he continuously changes his tune in many of the articles , q&a
interviews and post pdf files which are now obtained by reading
the previously posted zilano papers. Zilano supposedly has
successfully recreated Don's devices and say he did so incompletely,
not sharing in it's entirety the tru calculations, however, he
always refers back to Don's calculations written in his pdf.

The part I have a problem with is the wavelength calculations as a
divider of 247. He changes his tune by telling his audience to just
wind ten turns. If w do what he says, it brings us to the mhz
frequencies, whioch he clearly warns us to stay away from,
however, he does tell us this is where the exponential increases
in amperage are.

He says one thing, then reverts to another, always countering his
original story.. I think this is because the spark gap will take
the low frequency and revert it's output to the Mhz output.
Here is why
I say this. I created a tank circuit by buying a Barker & Williamson
RF coil, the model 3033 which is 70 uH, 10 inches long, 60 turns
and 3 " in diameter. The NST I use is a solid state NST that is
10kV max and 5kV rms. It offers a ground input, and, I use this
to attempt the output Don has by grounding the terminal to a
Non electric connected ground rod which has no direct connection
to the electric grid's neutral and ground. In fact, my ground rod
has 6 ohms difference to this ground I am using. I connected
the spark gap to this terminal, and feed one side of my L1 coil
to it. Then, I take the 2 outputs of the NST (the high voltage wires)
and, I connected the diodes (HF HV Diodes good for
20kV and 200 MHZ).These are identical to Don Smith's diodes.

I first test the NST to get the ourput frequency needed to tune
the coil. I connect the hv leads of the coil together through a
spark gap. I get 34khz with my hv scope probe. I also connect
the coil the way it needed to be wired to test the coil's running
frequency and I see the frequency changes when I introduce
the spark gap and the diode as Don did.

I then ensure the B&W coil is the primary, not the secondary,
reason why is because of the capacitor size needed to make
the primary resonant at 5kV in the 30 -35 khz range. According
to Don's schematics and the size of his primary, this can not
be the frequency, so, I dug a bit further by calculating the coil
inductance by diameter and length, amount of turns, etc.
by using Daycounter Engineering's coil designer calculator
which is free to use online. I come up with a specific
inductance, and, I compare the sizing of the B&W coil to
ensure accuracy., then, correct the differences to find
an accurate calculation per size, gauge and materials used
for the air core. Anyway. I check his sizes and calculate
this to find his frequency is in the MHZ, not khz, this is
because of the spark gap and pulsation of the energy into
ground, not the coil. The coil merely draws in aetheric
energy to assist with the mirroring of cold electricity forced
into the ground, which is called Tesla's Phase Conjugate
Phenomenon that Eric Dollard has proven to be true and
effective. This allows for many mirrors of the energy driven
into the ground to come back to the system through the
ground in an abundance of waves of energy that we can
induce by building these coils, and, use the ground as a
return to pick back up as many duplicates of the energy
as we want, from the ground as a neutral. The energy
comes back exponentially all depending on the frequency
generated in the initial stages of the system. When we
place a diode to cut off the negative swing of the wave,
we only have a positive swing upward and it is good to
produce an infinite amount of mirrored energy, meaning
that if the flux of the coil broadcasted far enough, we could
stick an inductor resonant to the drive frequency and pick
up the mirrored energy, store it into a capacitor and draw
the massive amperage out of the cap, combine it with the
voltage tapped from the coil and have a very substantial
output as Don had.

There is a lot involved to duplicate this, and, I actually got
the output correctly on my first try making exactly the system
Don built, however, my attempts to make it larger and more
powerful failed miserably because I wanted to light up more
than 6 bulbs, I wanted to run several hundred bulbs!

I did not know that all I really had to do was build more coils to
set next to the original coil, tuning them to pick this energy up,
and, when I took the system apart, the coils I have been
trying to reproduce failed to be the same. Since I took the
original apart., I have never read the inductance of it and
when I try to rebuild it, it isn't the same. I went as far as
buying the $150 Barker Coil and it still was not exact, so, I
have been trying this over and over to get back what I lost
unsuccessfully. I am retrying this all and will now do so
using Don's frequencies I have obtained by calculation now
because I didn't think of it earlier, however, I have only
gotten to the point where I finished just the primary coil.
Tonight I am going to complete the secondary provided
I have the correct capacitor, and if I do not, I will have
to order it from Allied...

I took (3) .1uF 10 kV caps and tie them in parallel with each
other, then, connect them in parallel to the B&W coil to
resonate at my NST frequency, which is 34khz. I tested this
with my function generator at 34khz and it is in perfect
resonance. Once step up, it runs down, one step down,
it goes down, so, I am right there, as my calculations
worked perfectly.

Now that I have this coil completed, I found that the weight
of number 6 awg solid copper is exactly 4 times the weight
of # 12 awg. This means that Tesla took a larger conductor
like a #6 and wound his secondary to maintain the wavelength
needed to create a mutual coupling in resonance between
the coils. This would mean that if my coil is 580 inches long,
that the output or l2 coil will need to be 145 inches long. I
can now do this by weight because if my primary and
secondary weigh the identical weight, I know they are
4 times different length due to the weights per foot listed
on Southwire's website!

This is how I am going to do this, however, my frequency
while operating now that it is wired with the spark gap is
in the MHZ, not the khz as I thought it was. I need to
ensure all coils resonate at the same frequency to
function correctly.

If I have as many windings as possible at 4 times, I have
to ensure the spacing between the wires is the same
percentage as the distance between the coils. This will
allows for a correct transformation between the primary
and secondary. So, 4 times the spacing will be the distance
between the coils diametrically. This is the key to
receiving an output I found originally and it i the missing
data we need.

I also need to ensure the output voltage corresponds to
the length of the secondary to get the correct output so
I could tune the output frequency or change it to DC, then
dump it into a cap bank and invert it for ac use at 120v.
I will eventually get it right, then, I am going to make an
ebook and sell copies of them cheap so all could
build this.

Marc

[med.3012]

Hello Sinergicus

Not sure if the Don Smith device always shows proper volts
or amps and that would also effect a scope shot. I believe
that this anomaly is stated often with the Don S. but maybe
someone else will correct me.

i agree with you Bro, in my opinion this look like digital versus analogy systems, in the latest test using an extended bifilar arrangement the voltage is radiant but accompanied with ordinary electric current so the final power is real active, it's no cold anymore after using it from the capacitor banks, the system work in more dimensions , so it's no easy to catch it !

[BroMikey]

How should look the scope trace when primary are in resonance
with secondary?

Can somebody post some pictures?

Hello Sinergicus

Not sure if the Don Smith device always shows proper volts
or amps and that would also effect a scope shot. I believe
that this anomaly is stated often with the Don S. but maybe
someone else will correct me.

[sinergicus]

scope trace at resonance

How should look the scope trace when primary are in resonance
with secondary?

Can somebody post some pictures?

[BroMikey]

Continuing entry on practical design for Don Smith Device.


Marc Belanger 3 hours ago
+Bro Mikey yeah, there are short circuits at the l2 coil, as a few of
the original diagrams have one completely shorted coil as well, it has
a 4th coil to transform the energy. there are shunts using caps as
well because some of the coils don't have resonant caps. the .047uf
cap is a shunting cap, but, we need to look.at the correct diagram.
I.figured this out because of the oscillation caused with the closed
tank l3 which.is in series with l3 and a bridge rectifier.

I've been slowly but surely collecting all parts of the system Don
built... I mean all of them except for the last yellow coil and the
Cornell Dublier caps

(.1uf 4kV wvdc yellow intro caps he had made)

anyway, I found the radio shack inverter, the neon dimmer, and
the barker and Williamson coil. next I'll eventually find the
Bertonee NST, I just put out want ads and wait.. they eventually
pop.up!

this way, when I eventually have it all, nobody can shoot me down
and say I did it wrong. it either works, or it doesn't. there's just
no in between. I've studied this forever and know everything
written about it, plus I have mass experience at failing, so, there's
not many bad ways to.try left.. lol. can't stop.laughing... I burnt
and blew up many things, blasted off screwdriver ends, discharged
caps up to 500 amps, and now since I know exactly what to do,
my ight output design will have to drive enough amperage out
provided the massive 88uF 1200v caps hold up during charge time.

I think they'll withstand microseconds worth of ups, downs and
overplayed, however, I'll have to ensure the load is enough. I
could shunt the circuitry with heaters until I figure out the correct
sized cap for the right voltages and amperage. my calculation was
1200 volts to give me 120 volts continuous. 10 times the over
voltage with minimal amperage to mix with 10 times lower voltage
and 10 times the amperage for a very substantial output.
supposedly, the frequency and oscillation between the output
coils and the short produces the Casimir effect according
to Don.

[BroMikey]

Greetings Force2B and Everyone to whom this may concern.

Here is a recent entry I feel it very important for serious
experimenters. Thanks Marc for sharing your work that has
required long investigations through the years.

Not only does Marc understand how to do this for himself
he is also well able to explain to others what is needed.
This is an important addition for replicators.



Marc Belanger 6 hours ago
+Bro Mikey I have had luck with one of my first replications of the
schematic Don supposedly released. There are like 7 diagrams
from Transworld Energy, Don's company before he passed away.
He must have made a bunch of the circuits work, however, he
would show the schematic without any values other than voltage
and locations of the parts, labeled with what they are but not even
the sizes of the parts. The funny part of the circuit is that the coils
are even more unique than a finger print, so, when folks ask "How
many turns are in my design, it really doesn't matter. The turns are
only responsible for the voltage per turn on the primary and the
secondary. What other builders don't realize is the fact that the
length of the coil, the spacing between the turns, and the diameter
are all part of the outcome that gives us the inductance of the coil.
The inductance is an important factor that gives us resonance at a
specific frequency when a capacitor is added to the coil in series or
parallel. A capacitor and an inductor creates a tank circuit . The tank
circuit will resonate at whatever frequency it is built for, however,
the capacitance and inductance of the tank circuit are the prime
reason why the tank circuit oscillates at the frequency it's
designed for.Factors in other components of the circuit, such as
coil capacitances and other inductances will change the desired
results, so, all parts of the circuit that connect together must be
tested for their total inductance before and after they are
connected together, then, capacitances of each part of the system
before and after their connections are made to see whether or not
they rise or drop, then, additional components will need to be added
to tune them back where they need to be to find and maintain
resonance.


When people ask what size wire and how many turns are use in say
the "L1" coil, there isn't enough data to build the circuit with this.
The best question to ask would be "how much inductance is in L1,
and, if any, how much capacitance does it have?


The things I did to have a successful resonation is the following:


Find the printed NST frequency. Then, add a gas discharge tube to
the outputs, connecting one of the NST's hot legs to one side of the
arc gap and the other hot leg to the other end of the arc gap. Turn it
on and test the frequency with an oscilloscope and a hv scope probe
that will handle the level of voltage from the NST. This will give the
correct feed frequency. Next, we have to test the NST's
output for capacitance with an LCR meter, and, the inductance.
Then, we need to wind our L1 coil, documenting the L1 coil's
length (precisely) and keep them separated, measuring the
inductance of the L1. Once we have this completed,
we need to connect it to the output of the NST
and test the inductance while connected. Once we obtain this measurement,
we need to take this and go to an online resonance
calculator to see what the capacitor size is that is needed to resonate
at the circuit's drive frequency. We need to add our capacitor to the
circuit and test the capacitance when connected with the cap inline
or in parallel so we could see if the capacitance remains where it
should be. If not, we need to tune it by adding the capacitance
necessary to land at the correct capacitance calculated by the
online calculator. Once this has been done, we need to energize
the circuit and scope it to see if it resonates and the frequency
is exactly where it is tuned.. the desired frequency. If it is off,
capacitance must be added or subtracted to get it correct. Once
done, we need to wind the next coil either 4 times longer or 4
times shorter, so we have a mutual coupling at a quarter
wavelength. This needs to be done from each node, which
will be a termination, a soldered connection, where wire goes
from stranded to solid, and, where the wires end up, such as
a termination on a battery. If the total length from the coil to
it's destination isn't calculated, the self resonance or mutual
coupling of the primary to secondary will NOT happen and the
circuit will fail.''


The secondary side is a little bit tough to do because we need
to calculate the length so we could land at an appropriate turns
ratio. This nearly never happens, however , I had instant resonance
the first try when I weighed out exactly the same wire weight for
the coils, as Tesla states he did. If you do this, the scale needs
to be precise. If we use the same sized wire, the lengths need
to be any even multiple of the other side. It's difficult to do
regardless because the precision has to be within 1/32". That is
difficult to do with wire cutters, so, weight is easier. The primary
could use fine strands such as #34 wire at 1/4 the length of the
secondary, and, the turns ratio is best to have a long enough
length so it has a high resistance, meaning it should have 100 to
500 ohms. This requires a very fine wire and a lot of wire. It also
allows the cold electricity to pass as the hairpin circuit does
with high impedance light bulbs do, while low impedance allows
nothing to pass, especially when in parallel. Resistance is part
of the resonant frequency, so, if Don took the 8 awg wire and
he added a 500 ohm resistor inline with the l1 coil, inside of the
tube, we would never know unless we tested it.


The Hairpin Circuit, researched by Karl Palsness has proven that
high impedances allow more power to pass within the circuit,
and low impedances virtually eliminate the energy transformation
/production. This is KEY with Don's system, and, we could add
the resistance to the resonance calculator to come up with an
LCR circuit that performs even better and is easier to tune than
the LC circuit since the capacitor values will be easier to acquire
if we add resistances. We will also be able to manage frequencies
within our full wave or half wave recitifiers by adding caps and
variable resistors within the bridge. This is key for controlling
frequency along with the use of inline chokes and capacitors
across coils with the use of a resistor.


There are hundreds of variables we need to cover in the Don
circuit, so, if we leave this alone, we will find we will never get
the outcome desired.


The most critical point in the system will be shunt points. To
add a short will need the use of another coil. Look at Don's
schematics. You'll see that 4 of 5 circuits use a short or they
are shunted with capacitors and arc gaps to bring in that
additional energy from the ambient. These systems are very
real.. We need shorts to make it work just like Ishmael Aviso
does. Short them it works!!!

[Force2B]

Hi, All,

For my very first post on this forum:
I have been looking at the picture of Tesla's apparatus, as well as a few years research into the whole 'free energy' stuff. Interesting. Sometimes I recall Johnny Cash, because 'I've been everywhere, man' on the 'net researching and reading about a whole lot of what I believe to be working technologies that have been suppressed by the so-called 'elite'.

I have not experimented with any devices yet (only for fear of burning down the house, or being shocked to death that I got something working :-D).

Right now, I am into research and ideas, including Eric Dollard and his postings here.

For my very first reply on this forum:
@ Jeff Pearson,
In studying the photo, and my knowledge of drawing, I believe the little squiggly you see in the circled section of Pat 568,178 is a 'hidden line' depicting a rod through a hole to hold the rod attached to a plate, and the thick portion is a sliding collar to allow the movement of the plates to vary the space between them.
I had to look at this a few times, because with Tesla, sometimes it's hard to see what he was doing.

I wonder what ever happened with the guys that were trying to replicate the Lockridge Device? I've had some thoughts and ideas on that as well.
The posts about Syairchairun's device is interesting, and there's a few that are working on that one, too.

Anyway, a VERY BIG THANK YOU TO EVERYONE who is willing to share their ideas, findings and concerns.

TheForces2B

[BroMikey]

Doc E says it works also.

The tube video guys are a mess when it comes time to
explain what they are doing. I remember way back watching
some make statements that the voltage is stepped up but
"SO WHAT" and I would go to the next video.

They always fumble the ball when it comes time to tell
someone else what is going on. Doc E did a bunch better
than what I have witnessed. Answers like more voltage
comes out just doesn't say it.


[VIDEO]https://www.youtube.com/watch?v=tyW5TYyx-k4[/VIDEO]

[BroMikey]

Here are some shots of Marc B. device replication of Don S.

You will notice the primary coil of 140 turns? I think that was the
number of turns, is on a 45 degree angle inside of the secondary.

Marc talks more about the Antenna. The pictures shows the angle.




Marc Belanger 10 hours ago
+Bro Mikey Thanks BroMikey. I have finally figure out
how the system induces the energy, and if we look at the
Don images of his benchtop generator, we see a tube
internal to the generator that gives us exciting news
showing me and the world that the North side of the coil
has a core, or, an antenna core, which would be similar to
Kapanadze's but, used for a different purpose. Don spoke
of the use of different core materials used in his Dipole
generator, one of them being a milspec metallic compound
that acts as an antenna, not as a magnetic core since the
material is not ferrous whatsoever. We would connect this
core to the arc gap side of the ground, at the NST,
introducing a pulse of ground to the core's antenna rod.
I find that aluminum acts as the best energy antenna, so,
if we pulse ground spikes through to this, there is an
energetic comp[onent to it, creating an attraction from
the aether , back to this antenna. Since the coils are wound
around this, for the magnetic energy to get back to the
antenna, it has to go through the coils first. We show in
my video that the aether's cold electricity is excited in the
secondary coil, ready to go, awaiting for the magnetic
energy component to hit it as it is in partial resonance.
The harmonic that is already there in the secondary is
ready to induce anything that would flow near or through
it as an electrical energy derived by the magnetic
component as the coil is charged, but, it isn't yet
energized. Since the antenna is attracting the Earth's
plasma tubes to the system, when we ground the other
side of the load, the charge pump has been pumping this
pulse of enrgy into the ground, and upon it's realignment
to the antenna core, this energy will start to flow as the
pulses start to migrate from the ground, back to the
secondary coil, completing an operating circuit. I really
feel this is the answer and I will be providing my work on
this to see if I could get the energy to flow this weekend,
provided I could provide a new and better ground to the
charge pump, and, the higher impedance ground will have
to be the load's return ( i think, I may have it backwards,
but, if it is, it will only require changing two wires to see
if the current starts to flow.) i will keep you all posted.
It won't take much to get it going as I built 2 new coils
with fine stranded copper clad aluminum 1/0 wire as the
antenna core last night and will be testing them later
today!

[mikrovolt]

The bent coat hanger is fashioned to represents it's fractal role.
Which is that part of a network to filter direct and converge the unobserved energy.

[BroMikey]

Marc Belanger Continued








Marc Belanger 1 day ago
.........
...............
The circuit is an experimental reversal of Don's original system.
He has given the wrong diagram, but, the info is out there to
make the system work, along with my interests in making the
correction, posibly even showing a complete diy if I don't receive
what Ive been after.. . anyway, don't keep shouting doubt..
your doubt won't stop me from succeeding in doing what I am
trying to do. I have several of these boards made up and two
of them have pretty promising results, the battery even
overcharges, the whole nine, I am just waiting for parts to
even out or reduce the battery's overcharging.. when they
arrive, the questions I had will be answered, especially the
Metglass core and the asymmetric transformer wound with
Litz.. It works like a charm.. There's a few other devices that
are already functional in my lab, so please, don't try to add
the suppression to my channel.. I've already passed your
level of negativity and have made it very positive for my
viewers. The big problem is that there's too many flies out
there seeking **** and, I've found that I get a lot further
helping others privately than posting any of the answers
to the public. You know as well as I do that I can't post
the reason why it all does what it does publicly ,and,
that Public posting has taken a lot of true innovators that
have figured out the reality of these devices offline and
made them go away for good. . I'm not one of them. I've
taken the impossible and already made it possible. What
makes you suggest that I can't do it again? That is my only
wish here.. is to show folks something is possible so they
don't give up. If I weren't in business with the power
industry, I would have already pushed these devices to
the private market, on the underground because there
aren't many able to take apart what I have built to be able
to replicate it and then tell you how it functions correctly.

That is the entire key to this all. if they could say the answer
with certainty, then they can build it, but, until that time
comes, everybody thinks this is a step up system that
magically collects ions, slices the energy and outputs magic
from the high frequency area.. which it can't and won't do..
it is what I am showing here, minus the special compound,
however, this can't be in resonance because it doesn't have
the metallic rod needed to make it all happen... I have, and
have had a similar metal compound available to me for years
that absolutely makes it function.. should I REVEAL?? remember
my key is similar in structure, but isn't the same, however,
it does and will continue to self operate no matter what you
or anybody else says. I just haven't posted mine because the
frequency isn't stable or in the correct range yet. It will be
very soon though, unless i receive what I've been asking for.


Marc Belanger 1 day ago
Unfortunately, cold electricity is immeasurable without the use
of a scope. In fact, I think I've proven this in my video to
show it only shows up as negative energy from a scope,
which doesn't happen in dc electronics. But, i will happen
to make it easier for all by offering a negative energy to
dc output by trying to rectify when I get back to the lab
this evening, seeing if it will successfully rectify and output
to charge batteries or a cap since the energy will not
charge ultracaps directly, but, it may only be because
the ultracap works more like a polarized electrolytic cap
and will filter out high frequencies, eliminating flow of
energy completely. I just think it is also too weak to do
so, however, when I remove the arc gap and reconnect
with a tap using a set of pliers, the led blows up like a
bomb, and, it makes no sense since it isn't a solid
connection, it is an open connection that gives the
oscillation of the tank circuit time to charge too high
and amperage build so high that the output ends up
exploding with mass amperage for a split second.
Anyway, this shows the true potential of the system
because it shows me one of two things.. I am using the
arc gap in parallel to the rectified input, then, charging
a cap in series to create a charge pump, however, I
need to do just the opposite and create a steady dance
of electrons as an input while the cap is already charged
in parallel to evenly release the strike of the arc in a
steady but silent motion to output as a massively an
increased output. This is easily done with a special
metallic compound, however, I can't give this up, I
am trying to find the way without it.



Marc Belanger 2 days ago
+dusanln Don's system is a protected system since it was
bought out for it's use, and, the majority of the technologies
were bought to be shelved. The information being listed online
will attract the wrong kind of attention, but. I certainly will
assist you, however, what folks think are the parts, aren't
really the same parts needed for every system. Every coil,
whether they are B&W's coils or not, air dux, or other brands,
even the same brand and model numbers will have a bit
different resonant component. We have to tune accordingly,
and, even the formulas used all over for Rf are not really the
true formulas, the formulas are literally specific for this device
and must be specifically comprised of two different mathmtical
equatins si. I am going to share one secret right now with you
all... The primary has to be the larger coil, and, the secondary
is a split coil, it doesn't have to be opposing coils, but, they
do have to be multiplied x each other's turns to get what you
need for primary turns. Also, the insulation of the primary
between each turn needs to be calculated "the space" needed
to calculate the resonant uf. at the same ratio as the turns
ratio from primary to secondary. Spacing equality is vital, and,
you need to have at least 4 times the primary spacing between
leads to catch a break with resonance with the mutual
inductance as it is vitally important to receive this for an
amplification factor. To make the tie physically will give an
amplification by way of "forced resonance: of the overall
inductance and turns, as Kapanadze does, however, the
coils of his feed into each other and aren't mutually
inducing from one to another by way of matching frequency
due to the same wavelength's oscillating without touching
each other, allowing the dispersement of electrons marching
in one coil, in the same direction as the other coil. This is
the whole magic trick with the Don coil system and it was
discovered by Tesla.

[BroMikey]

Thanks Marc

Here is the first step of a Don Smith Device.


Published on Jan 19, 2016

Showing ambient energy or cold electricity draw from ionic source.
Source uses 9.6 watts to fire the ZVS and light a 20 watt led
without being able to measure voltage with a low frequency energy
source.


[VIDEO]https://www.youtube.com/watch?v=0tM2WP3E_KM[/VIDEO]



Marc Belanger 2 days ago
the frequency is too low to.be rf, however, my circuit isn't in
resonance so I only get close with the right spark gap,
unfortunately, the one that works to create resonance burns
out too quickly and it's rated for 5000 amp max discharge and
2700 volts , but, I.don't exceed 1280 volts input. the coil is built
to resonate at 30077 hertz but the output of the zvs and fly back
is much lower. this varies with the spark gap, how quick the
pulses are, etc.

the reason the ambient energy is induced is due to the coils
being close to resonance. the electrons in the primary coil
are dancing around by the pulses, and, the key to.getting
this to work is to have both in dipolar resonance so they both
have the electron movement. once they get the movement,
the secondary will operate and energize a load.. the closer
to.resonance, the more electricity comes out, however, science
declared a long time ago that there's only two.types of electricity,
amperage driven, which this is not, and static, again, which
this is not. this is cold electricity drawn from the ambient within
the secondary pulse because I'm driving the coil close to it's
natural resonant frequency. If I tune the secondary and connect
the correct capacitor, we can get exactly the input energy for free,
or many "mirrors" or copies of this energy amplified by what's
called phase conjugation.

this is not drawn from radio waves, there isn't 20 watts of power
to pull in down in my basement from radio.towers.. after finished,

I connected 12 of these leds, and they were all the same
level of brightness. I then connected a 50 watt led, turned it up and
smoked it. then, my arc gap came loose, I.connected it live and
it blew the ,20 watt led like a bomb. the amperage is devastating,
so, no, it's converted here within the circuit and outputs more
than in.by Earths flux, or something like plasma tubes.


Kangsteri 1 day ago
+Marc Belanger Well this is hard to explain easy, but here is
some of my current speculations with bad english... It could
be that the spark gap makes the circuit act like "solid state
stirling engine". So it doesnt use the traditional electrical
energy from the source, but it rings / moves the natural
energy in the circuit and its mass. So it doesnt create a
nything, it just boosts the natural movement of electric atoms
in the mass. Or it could be creating negative / positive state
to the circuit and the natural charge in the atoms of the mass
try to fix the balance. This could explain why it usually gets
cold too, if it sucks the needed current from the air atoms.
Tesla mentioned that it has similar state of matter than gas and
it might make similar hissing noise... On many "free energy"
devices the key element is some kind of tank circuit or the mass
of it all and tuning it. This means the size and relation of the main
circuit to rectifying circuit, coils, inductors and capasitors, and
the size of them. Coils and specially inductors seem to be often
very underrated thing in the circuit, they also store and give very
much power. I have made some tests on different style joule
thiefs and joule ringers too. To me they seem to act like
"ram pump", that can store, boost and limit the current. And
there would be very much improvements to be made in different
shapes and materials of the cores and wounding methods.
The Lasersabers "super joule ringer" is very special in this case.
It seems to work with small neodymium magnet core too. But i
need to make tunable capasitor and more tests with that, and
the polarity of it. I hope this makes any sense.



Marc Belanger 1 day ago
Yes, it makes sense to me, especially after I read Tesla's entire
high frequency section and tuning for resonance very recently
again and again, over and over, purely some deep form of
fascination I have had for electricity of a unique nature... I
even read about Tesla's fascination with electrical and lightning
as a child and it reminds me of myself. Since my father was a
lineman and became a master high voltage cableman , starting
his own business in the early 70's, I wanted to always do what
he did. At early ages, both myself and my brother had no fears
with the electric system and played with it often, electrocuting
ourselves and still not ever being afraid of the sources, not even
that of high voltage systems as we grew up. We both joined
the IBEW and the CT apprenticeship to learn a trade working
with high voltage cables, within transmission and distribution
systems. We have taken over the business and now run all of
the operations now for years, however, I have been experimenting
with power systems now for nearly 18 years, all types of
alternative energies, which I have found many ways to do
with hv and low voltage electricity was was thought to be
impossible now for the last 5 to 7 years. It seems that everytime
I lay down and try to sleep, I think about this and other options
for my experimentation that would me to rearrange the non
working experiments I am working with, just to get a special
feature or unique outcome, and, there are so many possibilities,
to me, the challenges are endless. I never give up with a
project I am working on until I am satisfied with the outcome.
I leave the projects together even if they don't work, then,
I go back to them once I see a vision of a new idea that works
to make something happen so it functions, then, I try it.
The visions usually portray a way to make the system work,
but, they never function the first time, I always have to wait
and go back to them time and time again!! I saw a vision in
my dreams last night,
and I feel I have actually found the correct arrangement
to use for the circuit I am working on, however,
this circuit is not Don's because it is my own arrangement.
I was told in the dream how to make it function, but, I will
have to use now a very high voltage and high current IGBT
or Mosfet for switching so the current can be connected and
disconnected from an isolated circuit to cause this high
amperage discharge in the secondary, enough to charge the
caps and battery to use for a massive gain in energy for
self looping and to do heavy work.. If you remember what I
stated about the arc gap, When I connected the arc gap
after it fell loose, I used a pair of insulated pliers and tapped
it to the source where it was fed, allowing a burst of HV to
get rectified and shoot through the coils, getting to the other
side in a very strong burst, but, nothing more than this other
than the exploding led chip. It caused a high powered blast in
the secondary that was startling, I mean it sounded stronger
than a shotgun blast and I literally jumped! . This blast was the
led exploding as loud as a 208 volt phase to phase explosion,
however, when the spark gap is connected normally, there isn't
enough of discharge from the secondary to do anything but light
the leds, however, I could light as many leds as I wish, with no
ill effect , or any use of energy from the source, in fact, the
energy used was reduced! I tried this again, and, the next time
I tested the output voltage and it was tested ok with the analog
meter which jumped up to 240 volts. I could tap the connection
together 5 times instantly and all 5 taps gave me 240 vac. I then
rectified this and it made 320 vdc, but, I decided I am going to
use an igbt or a mosfet to connect it after I isolate the control
for the igbt or mosfet and power the switching circuit from a
battery source that is unrelated, using a 555 to pulse it on and
off, creating this energy burst 60 times per second, then, transform
it to a lower voltage to see if it will charge batteries. I know it
will work, I saw it in my visions working, and, that is when they
all work perfectly. Oh, BTW yes , you are 100% correct, this
energy that powers the leds seems to be smart, like it has a
mind of it's own, knowing what it will blow up or what it will not..
I actually am able to feed my cheap and old laptop with it
and it turns on, however, it will not charge the battery. I am
trying to figure out something and would like to see if it needs
rectification to feed the battery first, and, if it does, we won't
need to go any further. This means we can charge batteries,
then, use the battery to feed large ultracapacitors for load
handling, and, fire up powerful inverters. The energy, touched
by a human has absolutely no effect.. add a light bulb..
no effect... add a neon no effect... add the led , or as many
as we wish and it or they lights up, but, these aren't low power
leds, these are chip style flat leds that won't light without
50-100 volts and 50 watts, or, 12-24 volts and 10-20 watts
consumption. But, the circuit will power up as many as I can
connect to the circuit. it will energize the same brightness on
all of them as well. I connected all of them tonight in one shot,
then, I connected 20 of the 1 watt leds in series and parallel
without popping them. I connected a 4' flourescent bulb to full
brightness and the load drops to zero when it does this. There
is no hv according to the oscope too. It is very strange! Thank
you for your interest. If you wish, ask me to connect items and
I will video them for you before I change the circuit I'd like to
keep it for testing. I am going to bring this out to Yale University
for testing soon, I would like to make an appointment for a visit
and possibly have their students do a study on it if they wish.
I do a lot of work at Yale currently and have a friend that told me
he would be able to get me in the door for a physics study as he
did once before for another project..