Donald Smith Devices too good to be true

[usu]

I think that we could use Zazarinin's transformator in our replication, that way i redrow Tiger's device (which can use less than 10 Watt and bring out 150Watt)
this manner - in center i put ferrite pipe inside - coil and in the middle - cuprum nail to harvest power out I think that is better way!

Hi,Ganzha!

This is the converter the same as zilano offered.
Now I am thinking about it.

But there is other topic in the your previos picture.

Here is an article about Tesla dipole.

диполь Тесла : Новая теория - CyberEnergy.ru - альтернативная энергетика

Try to understand the meaning of it (it is in russian)

The author said about the main principle of Donald and Kapanadze devices.
He explained this principle in easy way.
Both devices have used the Tesla dipole principle.
If it is interesting for you i'll try to translate it(not easy for me).

video
Best regards,

Sergey.

[thelast]

it didnt work coz user didnt follow the schematic. use a diode hv after tesla terminal and use another diode after the second spark gap. and read don document again.

zzzz

Well, Zilano you didn't see the whole video!
Please take the 5 min and look at all of it's content!

[David Fine]

Recent Zilano Deleted Posts PDF

PDF Update:
Ran into some difficulties with the pdf but it is coming along. Most of the diagrams I retrieved are micro sized and there is no way to enlarge them. They are not a useful usable size in their saved format.

P.S.: I have to try and get this done before May 14 because my right arm will be out of commission due to surgery for six weeks.

[Peculian]

Yes - Tesla Rules

I like to ask!
Why we never even try to replicate classic Tesla?

nice question Ganzha.
Even Tesla himself would have done that question.
He never liked to go away from simplicity.
It is wise if someone sticks to the very basic simple schematic.
Going away from simplicity means chasing more headaches & trouble, but nothing good out of it.
How do you guys think Don Smith and Tariel Kapanadze got the thing working wild ?
You might have understood it: From following strictly Tesla`s concepts.
Those are the very concept different interests try to keep away from public attention.
Why ? Because it can bring to people freedom from their chains of slavery !
Remember folks : Keep it simple in order to succeed.

@thelast
Might I say something ?
Don`t expect to see free energy from an MOT. Those beasts are an energy
killing factory. In case you didn`t know, MOT coils are aluminium wire, not copper wire.
Thats why they have low efficiency.

@David.F
Take care of yourself my friend.The days we live are really bad.
The doctors cannot feel your pain,they most likely feel your wallet. Sad but true.

cheers.

[Joit]

Hi,Ganzha!

This is the converter the same as zilano offered.
Now I am thinking about it.

You got that wrong, its the same Converter, that someone else did build and the Copycat catched up with to turn the useless Wheel.
Still funny, when anywhere is a Diode in, its a Avramenko Diode. Not.

[Ganzha]

Hi,Ganzha!

This is the converter the same as zilano offered.
Now I am thinking about it.

But there is other topic in the your previos picture.

Here is an article about Tesla dipole.

диполь Тесла : Новая теория - CyberEnergy.ru - альтернативная энергетика

Try to understand the meaning of it (it is in russian)

The author said about the main principle of Donald and Kapanadze devices.
He explained this principle in easy way.
Both devices have used the Tesla dipole principle.
If it is interesting for you i'll try to translate it(not easy for me).

video
Best regards,

Sergey.

For Sure Zilano offered the same, but Tiger used the same in 2007! He just made only one mistake - he put inside ferrite pipe not a coil but one plate of not finished capacitor - just one string, he should put inside one loop at least or two plates of capacitor. It is the reason why I redrow his schematic

[promt]

Why then Zilano confused people over and over agen and Don S. too ?

Because she DOES NOT know.

And typical answer in these cases - "you did not do as I said" or "u didnt follow the schematic".
You just look at her schematics - it's a joke; u, zilano, better stick with original schematics, those people WORKED hard before came with it, who r u to change it?
But love you passion to pull others legs.



Nice job with DS rep by the way.

[Ganzha]

Hi Sergey!

Very good conceprion in link you gave me! I am agreed that it better way - because it is classic Tesla!
Our problem now it is right way to harwest so called Free Energy. What it should be - Avramenko Plug? Triple Condensor? Ferrite Transformator? Cadeus Coils?

[zilano]

Hi,Ganzha!

This is the converter the same as zilano offered.
Now I am thinking about it.

But there is other topic in the your previos picture.

Here is an article about Tesla dipole.

диполь Тесла : Новая теория - CyberEnergy.ru - альтернативная энергетика

Try to understand the meaning of it (it is in russian)
Sergey.

If you take an ordinary coil wound on a cylindrical frame and inflate it, for example, unipolar pulses of constant voltage, the pattern of distribution poles in such a coil will be obvious, that is, we have the symmetry of the poles at the edges of the coil, NS poles, depending on the polarity of the pump.

.

This symmetry is due to the fact that if we pump, for example, not transistors, and the Tesla oscillator, then there is a spark and a capacitor.

.

When a charged capacitor is discharged through a spark gap in the inductor, the secondary circuit by a powerful burst of magnetic field coil, we obtain a traveling wave, this wave propagates along the winding of the secondary circuit reaches the end of the coil and the secondary winding is reflected and returns to the place of the wave form peaks and minima of the field, thus creating a symmetrical pattern of distribution poles, NS.

.

There is not any difference as the secondary coil is wound with respect to the inductor in a clockwise or counterclockwise, traveling wave will be distributed to the direction of winding the secondary coil.

.

Such a reel rightly be called a dipole, but the dipole in terms of distribution poles, if you do not take into account other important fundamental aspects.

Next, we take one first coil similar in all parameters (length of wire, the diameter of the frame, the length of the winding, and so on) and place a second coil on the same axis with the first, we analyze the field distribution and movement of the traveling wave, given that we will only pump up the first coil, the second simply connect to the first, the direction of winding the second coil is similar to the first, for example to produce a clockwise winding as the first and second, look what happened!

Image resized to : 56 % of its original size [ 888 x 237 ]

We got a lengthening of the poles, the poles were the same as in the first embodiment, only changed, in fact, the length of the winding (inductance and capacitance and the coil itself), we got all the same dipole.

Now we change the direction of the second additional winding coils will be pumped as well as in the first and second embodiment, the pumps have only one arm and the second arm just connect to the first.

Image resized to : 60 % of its original size [ 830 x 307 ]

Since the second coil (more on the text plecho2), wound clockwise
In this embodiment, the winding direction of the connection plays an important role. During the time t1, a traveling wave propagates along plechu1 then reflected, and also applies to plechu2 and is also reflected in the end we get a double maximum of the field, we obtain an asymmetrical system, at time t2, when the traveling wave is reflected from plecha2 not reached the minimum point on the plecha1 the opposite end of the counter for the inclusion of the two arms is a slowing of the pulse traveling wave, which leads to the emergence of new traveling wave at time t2, which leads to the appearance of 0 in the center of the connection of the two shoulders, and more specifically the reflected wave is extinguished new traveling wave which propagates at time t2.

.

How are the fields in such a system, or rather not be distributed, and redistributed. There is a shift of the poles and consequently the change of maxima and minima of the field coil. if you remove plecho2 in the general scheme of the poles on the pleche1 will be distributed with respect to the polarity of the inductor pump that is left of N, S right, etc. We connect to plecho2 plechu1 in the center, we obtain a zero point (zero point is formed as described above, what its benefits and purpose will be described below.), followed by the logic of the field plecha2 should be distributed as follows: left of N, the right of S, but since the time t2, we get the counter-traveling wave, which absorbs the reflected, as a result, we obtain 0, then the center will be a minimum field rather it is not there at all, because there the point 0. And since there are no poles of the system changes the last pole to the opposite pole plecha2 plecha1, part of the wave reflected from the plecha1 added to the traveling wave and the time t2 is the sum of the waves and the faces of the reflected wave received from the traveling wave at time t1, the result is a dipole Tesla, a dipole with a redistribution of the poles! (with a forced redistribution).

For what is the dipole Tesla?, But because the dipole is not a simple Tesla coil which initially has two opposite poles, and that the coil which receives two opposite poles, resulting in redistribution of the poles relying on the redistribution of air and works directly with ether.

Под словом диполь

By the word of the dipole Tesla coil you need to understand complicated with two poles and a coil that receives these two different poles of the same name as a result of changes in the opposite poles of the inclusion of two identical coils.

The electrical circuit of the dipole Tesla:

It is in this inclusion, we obtain the order of movement of a traveling wave which is described above.

With regard to the point of zero point zero is the point in which under any circumstances, will always remain off condition of energy, that is a point of low energy conditions of such a point can be taken as a constant, all the energy which is stored and circulated in the dipole will be circulated on this point, but by a simple negative or land, it is easier to say the point runoff, or simply zero!


The interaction of the dipole Tesla with ether (medium)!

How to influence the air or how to interact with the ether, in order to interact with the ether is necessary to observe some of the factors, ie, when blocking the electric and magnetic fields to a certain extent, when a sudden change in the parameters of these fields and more specifically their sharp extinction, is a forced response of the medium but by the simple response of the medium-the ether.

In the dipole Tesla, the conditions under which a limited amount in a short period of time dramatically changed the characteristics of magnetic and electric field strength at which an abrupt disappearance of the fields in a very short time, at this moment, the energy of the ether (the medium) is fed into the coil initiating the necessary conditions for drainage, as well as the conditions are met with which it periodically broadcast the stream to the coil can be arranged continuously or at a specified frequency, the frequency will be tied to the frequency of the pumping system.

Циркуляция тока в диполе Тесла

The circulation of current in the dipole Tesla

The current in the dipole moves from point A to point B, and specifically circulated with respect to 0, with respect to runoff.

AB.

Since due to redistribution of the poles, we obtain the standard picture of the poles N and S, then the coil even though the counter but works like a normal coil with one shoulder, plus a component of the energy component of the air enters the system, hence the process of execution of any work to overcome the resistance of the load in the chain AB .

[zilano]

Because she DOES NOT know.

And typical answer in these cases - "you did not do as I said" or "u didnt follow the schematic".
You just look at her schematics - it's a joke; u, zilano, better stick with original schematics, those people WORKED hard before came with it, who r u to change it?
But love you passion to pull others legs.



Nice job with DS rep by the way.

well if u think am pulling legs then walk free on your own legs.
good luck at all !

best wishes!

[vidbid]

If you take an ordinary coil wound on a cylindrical frame and inflate it, for example, unipolar pulses of constant voltage, the pattern of distribution poles in such a coil will be obvious, that is, we have the symmetry of the poles at the edges of the coil, NS poles, depending on the polarity of the pump.

.

This symmetry is due to the fact that if we pump, for example, not transistors, and the Tesla oscillator, then there is a spark and a capacitor.

.

When a charged capacitor is discharged through a spark gap in the inductor, the secondary circuit by a powerful burst of magnetic field coil, we obtain a traveling wave, this wave propagates along the winding of the secondary circuit reaches the end of the coil and the secondary winding is reflected and returns to the place of the wave form peaks and minima of the field, thus creating a symmetrical pattern of distribution poles, NS.

.

There is not any difference as the secondary coil is wound with respect to the inductor in a clockwise or counterclockwise, traveling wave will be distributed to the direction of winding the secondary coil.

.

Such a reel rightly be called a dipole, but the dipole in terms of distribution poles, if you do not take into account other important fundamental aspects.

Next, we take one first coil similar in all parameters (length of wire, the diameter of the frame, the length of the winding, and so on) and place a second coil on the same axis with the first, we analyze the field distribution and movement of the traveling wave, given that we will only pump up the first coil, the second simply connect to the first, the direction of winding the second coil is similar to the first, for example to produce a clockwise winding as the first and second, look what happened!

Image resized to : 56 % of its original size [ 888 x 237 ]

We got a lengthening of the poles, the poles were the same as in the first embodiment, only changed, in fact, the length of the winding (inductance and capacitance and the coil itself), we got all the same dipole.

Now we change the direction of the second additional winding coils will be pumped as well as in the first and second embodiment, the pumps have only one arm and the second arm just connect to the first.

Image resized to : 60 % of its original size [ 830 x 307 ]

Since the second coil (more on the text plecho2), wound clockwise
In this embodiment, the winding direction of the connection plays an important role. During the time t1, a traveling wave propagates along plechu1 then reflected, and also applies to plechu2 and is also reflected in the end we get a double maximum of the field, we obtain an asymmetrical system, at time t2, when the traveling wave is reflected from plecha2 not reached the minimum point on the plecha1 the opposite end of the counter for the inclusion of the two arms is a slowing of the pulse traveling wave, which leads to the emergence of new traveling wave at time t2, which leads to the appearance of 0 in the center of the connection of the two shoulders, and more specifically the reflected wave is extinguished new traveling wave which propagates at time t2.

.

How are the fields in such a system, or rather not be distributed, and redistributed. There is a shift of the poles and consequently the change of maxima and minima of the field coil. if you remove plecho2 in the general scheme of the poles on the pleche1 will be distributed with respect to the polarity of the inductor pump that is left of N, S right, etc. We connect to plecho2 plechu1 in the center, we obtain a zero point (zero point is formed as described above, what its benefits and purpose will be described below.), followed by the logic of the field plecha2 should be distributed as follows: left of N, the right of S, but since the time t2, we get the counter-traveling wave, which absorbs the reflected, as a result, we obtain 0, then the center will be a minimum field rather it is not there at all, because there the point 0. And since there are no poles of the system changes the last pole to the opposite pole plecha2 plecha1, part of the wave reflected from the plecha1 added to the traveling wave and the time t2 is the sum of the waves and the faces of the reflected wave received from the traveling wave at time t1, the result is a dipole Tesla, a dipole with a redistribution of the poles! (with a forced redistribution).

For what is the dipole Tesla?, But because the dipole is not a simple Tesla coil which initially has two opposite poles, and that the coil which receives two opposite poles, resulting in redistribution of the poles relying on the redistribution of air and works directly with ether.

Под словом диполь

By the word of the dipole Tesla coil you need to understand complicated with two poles and a coil that receives these two different poles of the same name as a result of changes in the opposite poles of the inclusion of two identical coils.

The electrical circuit of the dipole Tesla:

It is in this inclusion, we obtain the order of movement of a traveling wave which is described above.

With regard to the point of zero point zero is the point in which under any circumstances, will always remain off condition of energy, that is a point of low energy conditions of such a point can be taken as a constant, all the energy which is stored and circulated in the dipole will be circulated on this point, but by a simple negative or land, it is easier to say the point runoff, or simply zero!


The interaction of the dipole Tesla with ether (medium)!

How to influence the air or how to interact with the ether, in order to interact with the ether is necessary to observe some of the factors, ie, when blocking the electric and magnetic fields to a certain extent, when a sudden change in the parameters of these fields and more specifically their sharp extinction, is a forced response of the medium but by the simple response of the medium-the ether.

In the dipole Tesla, the conditions under which a limited amount in a short period of time dramatically changed the characteristics of magnetic and electric field strength at which an abrupt disappearance of the fields in a very short time, at this moment, the energy of the ether (the medium) is fed into the coil initiating the necessary conditions for drainage, as well as the conditions are met with which it periodically broadcast the stream to the coil can be arranged continuously or at a specified frequency, the frequency will be tied to the frequency of the pumping system.

Циркуляция тока в диполе Тесла

The circulation of current in the dipole Tesla

The current in the dipole moves from point A to point B, and specifically circulated with respect to 0, with respect to runoff.

AB.

Since due to redistribution of the poles, we obtain the standard picture of the poles N and S, then the coil even though the counter but works like a normal coil with one shoulder, plus a component of the energy component of the air enters the system, hence the process of execution of any work to overcome the resistance of the load in the chain AB .

Very interesting post, Zilano.

Thanks for posting it.

[promt]

well if u think am pulling legs then walk free on your own legs

Only after you

[harishsingh]

Don Smith replication

Another Don Smith replication ?





Беспроводная передача энергии. Опыт 1 - alanhk147

[zilano]

Very interesting post, Zilano.

Thanks for posting it.

not my post i just did the translation of the link posted by Ganzha.

i always said bifilar but nobody listened to me. hope this thing clears up minds of the people.

anyways this is it.

thankx to Ganzha posting it.

rgds
zzzz

[Ganzha]

not my post i just did the translation of the link posted by Ganzha.

i always said bifilar but nobody listened to me. hope this thing clears up minds of the people.

anyways this is it.

thankx to Ganzha posting it.

rgds
zzzz

Thanks you too! Glad to meet you here!