Announcement

Collapse
No announcement yet.

Donald Smith Devices too good to be true

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mikrovolt
    replied
    Originally posted by mikrovolt View Post
    The exploit of battery chemistry by impulse waves is one application.

    Power system application Mechanical energy is converted into magnetic energy such as a Faraday disk.
    Then there came about the dynamos and the reverse conversion that of generators.
    If you want more force to drive a standard electrical motor high frequency and acoustic components are not desirable. However

    Between the generator (or battery) and the motor there has been speculation that ambient energy enters a transverse system inefficiently generating heat
    The exploit is to better facilitate ambient flow in a hybrid transverse system.

    [ATTACH]20499[/ATTACH]

    The transient electrical and oscillations phenomena of huge surges and arc over on transmission lines has been documented. (nothing to do with Tesla I think.)

    https://books.google.com/books?id=Te...manhole&f=true

    https://books.google.com/books?id=3c...anhole&f=false

    The 2 waves are the AC and the Tesla impulse wave. Video of Eric Dollard's understanding of how they mesh together.
    in nepers per second represented together on the same graph with the AC wave.
    https://youtu.be/GObB67ETvRQ?t=11176
    discussion of the hysteresis with convoluted ellipse. Steinmetz wave chart.
    https://youtu.be/GObB67ETvRQ?t=10751
    The symbolic representation of the impulse is scaled by the log notation (impulse in log scale )
    This is where Dollard took it into algebra. This requires understanding rules on how to view in same dimension.
    Last edited by mikrovolt; 03-07-2018, 07:47 AM.

    Leave a comment:


  • mikrovolt
    replied
    Utopia Now,
    A typical Bearden MEG discussion discusses the MEG's application
    also can be contrasted to Dollard's application of hybrid telephone lines.

    DS application refers to either Baumann or Bearden. audio lecture 18:10 -

    Bearden points out that the broken symmetry of a dipole in a generator
    is responsible for in rush and not the external field outside the wires.

    The Baumann wimshurst hybrid has mechanical input difficult to understand how
    it functions because the parts details are withheld. I have not read concept
    on Baumann. Not enough information.

    in rush from the vacuum

    The Tom Bearden Website
    Last edited by mikrovolt; 03-01-2018, 07:23 PM.

    Leave a comment:


  • med.3012
    replied
    Originally posted by Utopia Now View Post
    Hallo Mikrovolt I see you are online ..

    Do you have a link to or from the audio lecture reference a@ 18:10 -
    DS mentions Tom Bearden Taping the faster than light field.

    Or does somebody else has that link

    I am very interested

    hi !


    here you are the audio file ,

    https://energyevo.com/2016/09/03/iw2...dio-recording/


    regards

    Leave a comment:


  • Utopia Now
    replied
    Ds audio fragment

    Hallo Mikrovolt I see you are online ..

    Do you have a link to or from the audio lecture reference a@ 18:10 -
    DS mentions Tom Bearden Taping the faster than light field.

    Or does somebody else has that link

    I am very interested

    Leave a comment:


  • Bob Smith
    replied
    Perhaps the cold breeze effect goes hand in hand with an endothermic reaction, which in my observations, seems be tied to cold electricity.
    Bob

    Leave a comment:


  • ilandtan
    replied
    Originally posted by Dwane View Post
    Hi,
    if you don't mind me asking, what frequency, in your opinion, would you think Tesla used to get the cold breeze effect?

    Regards

    Dwane
    I wish I knew, I would be tossing out the air conditioner, I live in Florida.

    I'm surprised why that kind of information is ignored. Maybe it's a lie, and smart people know that. The impacts of waves might just be stimulating the brain to feel that. And what the heck is an Aether Wave?

    Leave a comment:


  • Dwane
    replied
    to ilandtan

    Hi,
    if you don't mind me asking, what frequency, in your opinion, would you think Tesla used to get the cold breeze effect?

    Regards

    Dwane

    Leave a comment:


  • mikrovolt
    replied
    Originally posted by ilandtan View Post
    Thank You mikrovolt, I viewed all the links, I am sorry I am just not smart enough to comprehend where to connect the dots. I am trying to understand, but most of the reading is almost quasi religion that I have to accept on faith, I can't determine the potential empirically. I start tinkering with the math and it upsets me for instance...



    Did the author not realize that .1 millisecond equals 100 microseconds? Which equates to 10 kHz. So with a signal generator from China, I can be causing pain with a square wave and a tuned horn and an amplifier... But that's well in our audible range and appears as Eb in the 9th octave. So unfortunately it would be only causing annoyance pain... not real pain.

    Does anybody think outside the box, and toy in their mind that if you could create a longitudinal wave at the frequency that cause people to feel a cool breeze and happier, we could reduce gillions of KW/hrs we spend on air conditioning? Places like Africa would be euphoric.

    It's sad that all we have from Tesla is that kind of mental pillows to place us to sleep. When I read that kind of text it seems like a blind man was trying to describe a sunset.
    The exploit of battery chemistry by impulse waves is one application.

    Power system application Mechanical energy is converted into magnetic energy such as a Faraday disk.
    Then there came about the dynamos and the reverse conversion that of generators.
    If you want more force to drive a standard electrical motor high frequency and acoustic components are not desirable. However

    Between the generator (or battery) and the motor there has been speculation that ambient energy enters a transverse system inefficiently generating heat
    The exploit is to better facilitate ambient flow in a hybrid transverse system.

    Tesla magnetic quench.JPG

    The transient electrical and oscillations phenomena of huge surges and arc over on transmission lines has been documented. (nothing to do with Tesla I think.)

    https://books.google.com/books?id=Te...manhole&f=true

    https://books.google.com/books?id=3c...anhole&f=false
    Last edited by mikrovolt; 02-28-2018, 12:08 AM.

    Leave a comment:


  • med.3012
    replied
    Originally posted by ilandtan View Post
    Sometimes we just keep spewing the DS quotes hopping our devices fall into some cohesive salad, and forget about the designs he showed us.

    We all know this DS AEG:




    Look at the components on this device (rack below)
    I drew it out in Visio and tried to reason the component function in a schematic with the AEG in mind. Count the different components.

    Look at the Coke Machine device. How many different components do you see?

    It's a simple problem, how do you get a capacitor to act like a power source with those same components. With that functional guideline that DS said how the AEG worked.

    That's my approach and now I have low power test that confirms it's operation.

    hi !


    in my opinion it's a good thing to have different approach !




    let's do real work and experiment, if you are right it don't mean i am wrong

    Leave a comment:


  • ilandtan
    replied
    Sometimes we just keep spewing the DS quotes hopping our devices fall into some cohesive salad, and forget about the designs he showed us.

    We all know this DS AEG:


    CAPACITOR [ A ] WITH A PREDETERMINED VOLTAGE PLACED UPON IT, CAUSES CAPACITOR [ E ] TO DUPLICATE FROM THE AMBIENT - EARTH GROUNDING THE ENERGY PRESENT AT [ A ]. WITH AN INPUT DIODE PLACED [ C ] AND AN OUTPUT DIODE PLACED AT [ B ], THE ENERGY PRESENT ON [ E ] FLOWS THROUGH A TRANSFORMER INTO AN EARTH GROUNDING. USEFUL ENERGY IS OBTAINED FROM THE TRANSFORMER. DONALD L. SMITH, 14 FEBRUARY, 2004.
    Look at the components on this device (rack below)
    I drew it out in Visio and tried to reason the component function in a schematic with the AEG in mind. Count the different components.

    Look at the Coke Machine device. How many different components do you see?

    It's a simple problem, how do you get a capacitor to act like a power source with those same components. With that functional guideline that DS said how the AEG worked.

    That's my approach and now I have low power test that confirms it's operation.
    Attached Files

    Leave a comment:


  • med.3012
    replied
    Originally posted by Dwane View Post
    Hi med.3012,

    Thanks for the explanation. With regards to my experience, there was still available charge after the device was turned off. I also get the immediate exchange notion. Therefore, I am temporarily stating that we are most likely dealing with three sides of the coin, Top, Bottom and Side. Too much? And, are they intertwined?

    Regards

    Dwane
    Dwane,



    Yes they are intertwined..this is a replacement for the D-ETBC, but obviously more correct and reasonable i hope so !


    regards

    Leave a comment:


  • ilandtan
    replied
    Originally posted by mikrovolt View Post
    Ilandtan, some feedback about the audio lecture reference a@ 18:10 -
    DS mentions Tom Bearden Taping the faster than light field.
    possibility of brief window at approx time wave fields combine constructively.
    Taping the Power of the Dipole without Destroying It
    Tesla impulse current explained by John Bedini
    RADIANT ELECTRICITY
    also Paul Baunmann and the Methernitha
    https://youtu.be/UzKCFpRdxuI?t=60
    Thank You mikrovolt, I viewed all the links, I am sorry I am just not smart enough to comprehend where to connect the dots. I am trying to understand, but most of the reading is almost quasi religion that I have to accept on faith, I can't determine the potential empirically. I start tinkering with the math and it upsets me for instance...

    Trains of impulses, each exceeding 0.1 millisecond duration, produced pain and mechanical pressures. In this radiant field, objects visibly vibrated and even moved as the force field drove them along. Thin wires, exposed to sudden bursts of the radiant field, exploded into vapor. Pain and physical movements ceased when impulses of 100 microseconds or less were produced. These latter features suggested weapon systems of frightful potentials.
    Did the author not realize that .1 millisecond equals 100 microseconds? Which equates to 10 kHz. So with a signal generator from China, I can be causing pain with a square wave and a tuned horn and an amplifier... But that's well in our audible range and appears as Eb in the 9th octave. So unfortunately it would be only causing annoyance pain... not real pain.

    Does anybody think outside the box, and toy in their mind that if you could create a longitudinal wave at the frequency that cause people to feel a cool breeze and happier, we could reduce gillions of KW/hrs we spend on air conditioning? Places like Africa would be euphoric.

    It's sad that all we have from Tesla is that kind of mental pillows to place us to sleep. When I read that kind of text it seems like a blind man was trying to describe a sunset.
    Last edited by ilandtan; 02-27-2018, 01:20 PM. Reason: grammer

    Leave a comment:


  • Dwane
    replied
    Originally posted by mikrovolt View Post
    Ilandtan, some feedback about the audio lecture reference a@ 18:10 -
    DS mentions Tom Bearden Taping the faster than light field.
    possibility of brief window at approx time wave fields combine constructively.
    Taping the Power of the Dipole without Destroying It
    Tesla impulse current explained by John Bedini
    RADIANT ELECTRICITY
    also Paul Baunmann and the Methernitha
    https://youtu.be/UzKCFpRdxuI?t=60
    Hi mikrovolt,

    Nice links! The Resonant fractals is interesting. i must admit when reading through some of the observations, I am totally lost, in as much as I am forced to attune my language skills to those of the notions stated. That is, trying to work out without further definitions what is really being expressed.

    Regards

    Dwane

    Leave a comment:


  • Dwane
    replied
    Originally posted by med.3012 View Post


    Hello Dwane,

    this is just a theory with a very interesting and unusual effects , one of them is the cooling effect of stainless steel ! i tried the same circuit as in the first experiments with tower coil ( single wire transformation ) .

    Mazilli driver can be used as induction heating, but in the case of ETBC there's a tiny increase in temperature ( the weather is relatively cold and heating can be felt easily ....)

    another phenomena is the diode have to be high amperage, the temperature of diode ( 3A 1000V ) increase rapidly when lighting a bulb ( 12 V 20 W )

    also the stainless steel build some charges in the surface ( i expect the voltage to be around 50 V ) this mean using the same configuration in HV can be lethal .


    the idea of zero time have to be explained, if you have a well balanced system exactly like a permanent magnet you don't have to wait for the reaction , you just need to take a copy from action/reaction , this mean we take the power from the exchange between magnetism and electricity , this is not similar to put some electricity to get an excess of magnetism ( amperage ) but instead let the magnetism take all the electricity as a natural loop here we have a high amperage, at the same time let the electricity take all the magnetism ( we get back again our voltage up in this natural process ...) the connection between the two appear in real time without delay .. this look like we are just taking a picture of the disturbance .
    Hi med.3012,

    Thanks for the explanation. With regards to my experience, there was still available charge after the device was turned off. I also get the immediate exchange notion. Therefore, I am temporarily stating that we are most likely dealing with three sides of the coin, Top, Bottom and Side. Too much? And, are they intertwined?

    Regards

    Dwane

    Leave a comment:


  • mikrovolt
    replied
    Originally posted by ilandtan View Post
    I have been presented and have reviewed 3 of the PPTs delivered by that "Team", if it makes sense to anybody please explain it to me. I can admit that I don't understand the secret sauce of the high amperage diodes, stated in that one also the 4k4 challenge PPT. That whole acceleration because of low resistance, well I can't wrap my mind around it. Nothing in my experiments tell me a high amperage diode works better, as you would predict with HF, a faster switching diode yields more output.

    I must say, after asking several questions about the content to the presenter, I just stopped dancing around and asked if they had a working device... and of course you can guess what the answer was... it was not a "yes"



    I agree, we are missing something more than what can be achieved by electrical engineering. We need to engineer power.

    I also want to share a little of my madness... I think that Don was concealing a relationship of these components that weren't conventional engineering. Maybe an effect we don't look in the components in the magnetic domain and he used it. Something that gives pulsing flux. Remember a generator is a harvester of pulsing flux.

    Even in that audio that Med linked, when asked about how to pick up energy he lets the sun shine at 18:10
    Ilandtan, some feedback about the audio lecture reference a@ 18:10 -
    DS mentions Tom Bearden Taping the faster than light field.
    possibility of brief window at approx time wave fields combine constructively.
    Taping the Power of the Dipole without Destroying It
    Tesla impulse current explained by John Bedini
    RADIANT ELECTRICITY
    also Paul Baunmann and the Methernitha
    https://youtu.be/UzKCFpRdxuI?t=60
    Last edited by mikrovolt; 02-26-2018, 08:27 PM.

    Leave a comment:

Working...
X