Announcement

Collapse
No announcement yet.

Donald Smith Devices too good to be true

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • soundiceuk
    replied
    The "Private Engineer" was Dragon.

    Leave a comment:


  • SlickDick
    replied
    Originally posted by soundiceuk View Post
    What are you doing to move free energy research forward dude?
    I do read a lot. For example reading every post in the renewable energy section on this forum since 2008. Including yours.

    @All

    Replicators must be aware they take part in experimenting. Unlike Paul claims (post #10863, post #10872), to build a working device "I promise". This is misleading and on false pretences, it is just wrong. If you like to experiment, it is fine. Experimenting is a joyful and meaningful way of learning, however it should be stated accordingly.

    Like I wrote previously. Please study Paul first before acting on what he is saying/claiming. I am sure Paul believes in what he is saying/claiming, but only for the sake of wanting to believe, without any knowledge of any kind on the subject of what he promotes, to an extend it is actually damaging and discrediting proper free energy research and the community.

    This thread http://www.energeticforum.com/renewa...f-concept.html is only a few pages, but will give you a good insight on what to expect working with Paul (and also the work of Bruce A. P. of which the proposals as of late is a progression upon).

    As for now, history unfortunately, is repeating itself. Same starring, same scenario, same plot. Different crowd though, but same results.

    Maybe Bruce can chime in and set the record straight as to what is the exact purpose and expectations in taking part replicating.
    Last edited by SlickDick; 02-10-2017, 06:46 PM.

    Leave a comment:


  • Wistiti
    replied
    Originally posted by ricards View Post
    If my opinion counts, I think that wire will short the attracted +ions on the ANT from attracted -ions of the ground only to return it all in the ambient. Instead of a wire how about a Capacitor? that way charges will not flow

    This idea is from Ricards...

    Leave a comment:


  • radioionics
    replied
    Originally posted by Wistiti View Post
    Is it also true that we have to only connect one wire between 2 contacts to make it work? And one of these contact is directly connected to the ground??



    Have you some reference document we can read on this.



    Could you also comment on the theories we made along the road? It will be really appreciated if you guide us; then we could stay on the right track...

    Thank you!

    There isn't much to be found on scalar waves, but to my understanding it is a wave of energy that is made up of a single charge.


    I have found out this week from all of the feedback that it is much more effective to add a capacitor instead of the wire. I don't recall who it was but it was in a diagram that was presented this past week. I might have been you. This prevents charge from bleeding into the ground.
    Last edited by radioionics; 02-10-2017, 05:45 PM. Reason: minor edit

    Leave a comment:


  • radioionics
    replied
    Originally posted by soundiceuk View Post
    When Bruce says the grail is right in front of you he isn't kidding!

    It's so similar to the original mirror circuit schematic you could leave everything in place.

    If someone figures it out we are going to enter the paradigm shift.

    It feels like the Scalar Waves (Radioionics) tutor left you an assignment / puzzle to figure out what scalar waves are, do and behave.

    Bruce, someone called you "old".

    Time to leave the class and retire? Haha

    Well Paul, I not getting younger, for sure. I see that there are a few here who are very close and they don't even know it.
    Last edited by radioionics; 02-11-2017, 12:09 AM.

    Leave a comment:


  • radioionics
    replied
    Originally posted by Wistiti View Post
    Ok! I think we need some guidance. Bruce, can you give some help please?
    It's the night here an I have to go sleep. My brain is boiling. Hope it will be a good night!
    Ciao!

    I might not be able to give guidance right away but I will when I get the chance.

    Leave a comment:


  • radioionics
    replied
    Originally posted by Wistiti View Post
    Hehe! yes, you right!
    Be sure it's not the first time it's happen either... I will learn!

    Actually, you are learning quite well by "brainstorming." You are finding out for yourself what works and what doesn't work with the circuits that have been presented to this group.

    Leave a comment:


  • radioionics
    replied
    Originally posted by Wistiti View Post
    Here is a picture of my first theorise (Connection of antenna to ground) sorry for the crappy picture.
    I let it run for 15 min.

    Im finally no sure it is it. cause the battery start at 12,35v and finish at 12,02v...

    Nice build... you have done well. I suspect you don't have much further to get your batteries to charge, instead of drain. It appears that you have a nice white light. This is what we want to see. If the light was purple the circuit would be built incorrectly.
    Last edited by radioionics; 02-10-2017, 05:43 PM. Reason: a letter was added where it was missing

    Leave a comment:


  • radioionics
    replied
    Originally posted by fan1701 View Post
    Battery pack shown in wrong polarity.

    al

    Thank you... I forgot to redraw them. Look at the drawing... it's fixed.
    Last edited by radioionics; 02-10-2017, 04:51 PM.

    Leave a comment:


  • radioionics
    replied
    Originally posted by Wistiti View Post
    Hi guys!
    I re-think and re-read all the last hint Bruce have share... I print the last mirror circuit and try to figure where the "just add one wire" should be. I try different path for the juice to travel and I finally think I have found... Look at the image for knowing the way I see it.

    It will really appreciate to have your comment on it!

    Next step, testing the theories.

    You are shorting the antenna ions to ground in this diagram.

    I see I have a few responses to give today. I will get to them by the end of today.

    Leave a comment:


  • fan1701
    replied
    Originally posted by radioionics View Post

    * This circuit has not been tested.
    Battery pack shown in wrong polarity.

    al

    Leave a comment:


  • Wistiti
    replied
    Originally posted by dragon View Post
    Ok, Paul, you like to be funny... Let's look at the timeline of events to date....

    We started with the original release... a dual resonant system with a tuned antenna to provide stationary waves. People started building from this, stated to be the tested and working version.

    Around 12/21 A second drawing appeared before any builds were completed with the first drawing. I studied it a bit and found some inconsistencies with the polarities and mentioned it. Shortly after, the mirror circuit was introduced, which reflected the corrections.

    About now everyone is scrambling to re-build everything they've done to date to match the new circuit.

    2 grounds introduced and the radiant patent BS - I let that go because I wasn't ready to introduce my findings that would show how wrong you really were.

    I then asked why the secondary circuit needed to be resonant... everyone is still working under the premise of standing waves.

    Yet another drawing is introduced, not well thought through as the "basic" build, it wouldn't work at all the way it was drawn and I let that slide which was later brought up by Tswift and corrected at a later date.

    Then out of the blue, tuning is no longer necessary because now it's operating on Scalar waves.

    There is a lot more I could point out within that time line but I'll leave the intricate details for others to decide on their own. It seems to me your throwing krap on the wall to see what sticks...

    I will retire from the academy of "cat n mouse" .

    I sit with bib, knife and fork ready and willing to dine humbly and gracefully on crow upon the arrival of any graduate's.

    I've grown to enjoy and respect the communications between members on this forum and I truly hope I am the one eating crow.... good luck to you all...
    I understand your decision...
    Thank you for the input you give.
    Respect.

    Leave a comment:


  • dragon
    replied
    Ok, Paul, you like to be funny... Let's look at the timeline of events to date....

    We started with the original release... a dual resonant system with a tuned antenna to provide stationary waves. People started building from this, stated to be the tested and working version.

    Around 12/21 A second drawing appeared before any builds were completed with the first drawing. I studied it a bit and found some inconsistencies with the polarities and mentioned it. Shortly after, the mirror circuit was introduced, which reflected the corrections.

    About now everyone is scrambling to re-build everything they've done to date to match the new circuit.

    2 grounds introduced and the radiant patent BS - I let that go because I wasn't ready to introduce my findings that would show how wrong you really were.

    I then asked why the secondary circuit needed to be resonant... everyone is still working under the premise of standing waves.

    Yet another drawing is introduced, not well thought through as the "basic" build, it wouldn't work at all the way it was drawn and I let that slide which was later brought up by Tswift and corrected at a later date.

    Then out of the blue, tuning is no longer necessary because now it's operating on Scalar waves.

    There is a lot more I could point out within that time line but I'll leave the intricate details for others to decide on their own. It seems to me your throwing krap on the wall to see what sticks...

    I will retire from the academy of "cat n mouse" .

    I sit with bib, knife and fork ready and willing to dine humbly and gracefully on crow upon the arrival of any graduate's.

    I've grown to enjoy and respect the communications between members on this forum and I truly hope I am the one eating crow.... good luck to you all...

    Leave a comment:


  • Wistiti
    replied
    Here is a picture of my first theorise (Connection of antenna to ground) sorry for the crappy picture.
    I let it run for 15 min.

    Im finally no sure it is it. cause the battery start at 12,35v and finish at 12,02v...
    Attached Files

    Leave a comment:


  • Wistiti
    replied
    Originally posted by soundiceuk View Post
    When Bruce says the grail is right in front of you he isn't kidding!

    It's so similar to the original mirror circuit schematic you could leave everything in place.
    Is it also true that we have to only connect one wire between 2 contacts to make it work? And one of these contact is directly connected to the ground??


    Originally posted by soundiceuk View Post
    It feels like the Scalar Waves (Radioionics) tutor left you an assignment / puzzle to figure out what scalar waves are, do and behave.
    Have you some reference document we can read on this.


    Originally posted by soundiceuk View Post
    If someone figures it out we are going to enter the paradigm shift.
    Could you also comment on the theories we made along the road? It will be really appreciated if you guide us; then we could stay on the right track...

    Thank you!

    Leave a comment:

Working...
X