Donald Smith Devices too good to be true

[med.3012]

Don Smith mentioned that if you charge one plate of a capacitor, the ambient back ground will charge the other plate. This is essentially what Carlos Benitez was saying in this 1915 patent. I replicated it some time ago and have decided to share the video of the experiment. It works.
https://www.youtube.com/watch?v=Jnee3xSxP4U

did you measured the INPUT versus the OUTPUT?

[tswift]

Don Smith Demystified

After years of research and experimentation, and reading this entire thread through at least twice, I now have something valuable of my own to contribute back to this forum that has helped me learn so much. I would like to call everyone's attention to this new document on Patrick Kelly's website:

http://www.free-energy-info.com/Radiant1.pdf

It contains a summary of my current understanding of the topics of Radiant Energy/Cold Electricity/Scalar Energy with applications to the Don Smith device and other devices. I believe it will help you in your own quest to build a working device.

[med.3012]

After years of research and experimentation, and reading this entire thread through at least twice, I now have something valuable of my own to contribute back to this forum that has helped me learn so much. I would like to call everyone's attention to this new document on Patrick Kelly's website:

http://www.free-energy-info.com/Radiant1.pdf

It contains a summary of my current understanding of the topics of Radiant Energy/Cold Electricity/Scalar Energy with applications to the Don Smith device and other devices. I believe it will help you in your own quest to build a working device.

nice info, thanks for sharing this

[p75213]

After years of research and experimentation, and reading this entire thread through at least twice, I now have something valuable of my own to contribute back to this forum that has helped me learn so much. I would like to call everyone's attention to this new document on Patrick Kelly's website:

http://www.free-energy-info.com/Radiant1.pdf

It contains a summary of my current understanding of the topics of Radiant Energy/Cold Electricity/Scalar Energy with applications to the Don Smith device and other devices. I believe it will help you in your own quest to build a working device.

When I click on the link in firefox a message appears as follows:

"Reported Attack Page!

This web page at Energetic Forum - Forum Display has been reported as an attack page and has been blocked based on your security preferences.

Attack pages try to install programs that steal private information, use your computer to attack others, or damage your system.

Some attack pages intentionally distribute harmful software, but many are compromised without the knowledge or permission of their owners."

[tswift]

Yes, I got that when I tried the link too, it mistakenly had an extra "http://" in the URL. I edited the post and should it work now, or you can just copy and paste the text into a new tab to get it correctly.

[a.king21]

did you measured the INPUT versus the OUTPUT?

There was no input, except the one touch to charge the system. You are looking at output - no input. I do not claim ou is because the Tesla switch was driven separately. It was a proof of concept experiment. I even used dc caps, and it worked. Also the camera could not record the ne2 correctly. It was on continuously

[med.3012]

There was no input, except the one touch to charge the system. You are looking at output - no input. I do not claim ou is because the Tesla switch was driven separately. It was a proof of concept experiment. I even used dc caps, and it worked. Also the camera could not record the ne2 correctly. It was on continuously

Ok thanks for the explanation.

[soundiceuk]

Hi folks, lets bring a close to this.

Don's briefcase device was extremely efficient for lighting but was not self sustaining or even COP > 2.0


Don Smith 2016:











Video:

https://www.dropbox.com/s/7d3qwt4pzu...itors.mp4?dl=0

[med.3012]

hello everyone


just to post something interesting about the resonance energy device, a new video published show a very promising technology called serial ETBC, a technique that can square your output power ...

good watching


[VIDEO]https://www.youtube.com/watch?v=a0FNZZywgng&feature=youtu.be[/VIDEO]




or click here https://www.youtube.com/watch?v=a0FN...ature=youtu.be

[Dave45]

Hi folks, lets bring a close to this.

Don's briefcase device was extremely efficient for lighting but was not self sustaining or even COP > 2.0


Don Smith 2016:











Video:

https://www.dropbox.com/s/7d3qwt4pzu...itors.mp4?dl=0

The schematic does not match the hardware. The primary is inside the two secondaries.

[Gedfire]

Lol

Hi folks, lets bring a close to this.

Don's briefcase device was extremely efficient for lighting but was not self sustaining or even COP > 2.0


Don Smith 2016:











Video:

https://www.dropbox.com/s/7d3qwt4pzu...itors.mp4?dl=0

Good to see you Soundiceuk! Nope,there will be other episodes!

[Gedfire]

Piezoelectric or an Electret Device?

Hey All,

Can anyone give a reasonable description of what this device is and how it works.This was posted by Soundiceuk many moons ago.That's device 2,4 and 5 in the picture.The one with the discs.Barium titanate piezoelectric ceramics,Barium titanate piezoelectric ceramics_Company News_UCE ultrasonic co.,Ltd

I now have renewed interest in it.I have my own theories but other perspectives are important.

Oh of course some of the parts are some sort of piezoelectric stuff.

Thanks

[med.3012]

Hello Gedfire,

i have no idea about this

[Gedfire]

Hello Gedfire,

i have no idea about this

Well Sir,

It appears that it was a conceptual model of the more advance devices Don said he cannot disclose due to contractual arrangements.


The black box or cuboid on the left of the last pic may be a signal and or frequency generator.Like this one: Lab Brick FAQ | Vaunix LMS Programmable Signal Generators

The middle piece is an ultrasonic device made from the Barium.He is using the possibly tuned device to pulse the two outer pieces.The ultrasonic frequencies will induce mechanic stress on the inner piezoelectric material which will vibrate to the frequency of the signal generator.The two outer pieces of piezo discs will be impacted by the vibrating of contracting and relaxing inner disc and a voltage will be generated .This is taken to a bridge rectifier with a capacitor for DC.Here is a book:https://books.google.com.jm/books?id...ectret&f=false

AWESOME stuff.I know Patrick Kelly will look this up and publish it.

I think this is what this Japanese inventor the eccentric Yoshiro Nakamatsu uses to power his house.Just much larger.

[med.3012]

Well Sir,

It appears that it was a conceptual model of the more advance devices Don said he cannot disclose due to contractual arrangements.


The black box or cuboid on the left of the last pic may be a signal and or frequency generator.Like this one: Lab Brick FAQ | Vaunix LMS Programmable Signal Generators

The middle piece is an ultrasonic device made from the Barium.He is using the possibly tuned device to pulse the two outer pieces.The ultrasonic frequencies will induce mechanic stress on the inner piezoelectric material which will vibrate to the frequency of the signal generator.The two outer pieces of piezo discs will be impacted by the vibrating of contracting and relaxing inner disc and a voltage will be generated .This is taken to a bridge rectifier with a capacitor for DC.Here is a book:https://books.google.com.jm/books?id...ectret&f=false

AWESOME stuff.I know Patrick Kelly will look this up and publish it.

I think this is what this Japanese inventor the eccentric Yoshiro Nakamatsu uses to power his house.Just much larger.

Thanks for this info.