Orgone is the ether

[Guruji]

coils

Is that how you see it? Because I see it as clockwise. I figure that current flowing according to right hand rule is female. The right side of this image:


I often see the use of opposite of my winding on succor punch or orgonite. They mention the coil add more power, warmth or tingle which is the opposite of what I want. With that I conclude that I have to use the reverse.

If you are energy sensitive, this cemenite should have not make your hand tingle at all.

I only made right hand rule coil or straight wire. For now I conclude the best is right hand rule coil with inner diameter around 3mm.

BTW, make sure the cement dry completely before trying to use it.

Those coils are the contrary as I learned atleast. The left one is the clockwise.
So you put those coils in cement? Is there a lenght for coil?
Thanks

[sucahyo]

Those coils are the contrary as I learned atleast. The left one is the clockwise.
So you put those coils in cement? Is there a lenght for coil?
Thanks

Yes, I put such coil in the cement. A friend mention that gap length between wound is important, but for now I just wind it angled around 30 degree. I currently try 3.6cm wire length. Maybe coil length important, but I am not able to tell the difference. But I felt coil is better than straight wire.

[ashtweth]

Conductivity alone does not appear to be centrally important to the readings on the LE Meter, and one cannot draw any straightforward relationships between the conductivity or mass of one metal object versus another -- variations in geometry will allow a lighter weight of metal of one shape to yield a higher reading than a heavier weight of metal of another shape. Insulators will also yield readings of significance, but generally lower than metals or living creatures. Layered combinations of insulators and metals, following the principles of Reich's orgone accumulator construction, will yield stronger readings than the readings which the individual components might predict.

Orgone meter test quote
Experiments with the Life-Energy Field Meter

[sucahyo]

Conductivity alone does not appear to be centrally important to the readings on the LE Meter, and one cannot draw any straightforward relationships between the conductivity or mass of one metal object versus another -- variations in geometry will allow a lighter weight of metal of one shape to yield a higher reading than a heavier weight of metal of another shape. Insulators will also yield readings of significance, but generally lower than metals or living creatures. Layered combinations of insulators and metals, following the principles of Reich's orgone accumulator construction, will yield stronger readings than the readings which the individual components might predict.

Orgone meter test quote
Experiments with the Life-Energy Field Meter

Yes, agree. An insulated copper pancake produce stronger effect on ice than uninsulated copper pancake.

A bunch of insulated copper would do little effect on a glass of ice, very local, but after being mix with cement, it change the whole freezer.

Unfortunately, people detect male easier than female. Because of that many only try to make the strongest male version.

[Guruji]

Coils

Conductivity alone does not appear to be centrally important to the readings on the LE Meter, and one cannot draw any straightforward relationships between the conductivity or mass of one metal object versus another -- variations in geometry will allow a lighter weight of metal of one shape to yield a higher reading than a heavier weight of metal of another shape. Insulators will also yield readings of significance, but generally lower than metals or living creatures. Layered combinations of insulators and metals, following the principles of Reich's orgone accumulator construction, will yield stronger readings than the readings which the individual components might predict.

Orgone meter test quote
Experiments with the Life-Energy Field Meter

Hi Ashweth what about resonance coil lenght did you read on that? maybe orgone boost more see this site:
Orgone Generators

[sucahyo]

Hi Ashweth what about resonance coil lenght did you read on that? maybe orgone boost more see this site:
Orgone Generators

When you test cemenite, please use at least 5 meter away from any device mentioned in that page.

Notice that 3.6 is 3/4 of 5.24cm, GL resonant length for copper/alumunium/bismuth.

[ashtweth]

Guruji did not even know that page was there bro thanks man

[Floridus]

Dear Sucahyo,



Are the loop intervals already right?

[sucahyo]

Dear Sucahyo,

Are the loop intervals already right?

Yes.

Lets disccuss it here:
http://www.energeticforum.com/health...tml#post129835

[Steve220]

Here is something interesting

A long time ago I seen a paper that talked about someone that was doing some work with Orgone accumulators. Metal plates have been placed in orgone accumulators before and volt meters attached to see if there was any energy being generated. The result had always been zero. However this time when the researcher tried this he got a reading. It was a surprise for sure. When he took the orgone accumulator to show to another researcher, the result was zero. Yet in his lab, there was always a reading. This set off a discovery process to find the reason for this. The very first thing found was that the researcher was using a very old volt meter. When a modern volt meter was connected to the plates, zero voltage. When the old volt meter was connected, a reading. When the old and modern volt meter was both connected to a battery, the very same reading. But not on the Orgone accumulator. A volt meter is a volt meter, right? So he tore the volt meters apart and found them to be about the same construction, except for one thing. The new volt meter copper coil was wound on an aluminum frame. The old volt meters copper coil was wound and held in place with Shellac. Some how the Orgone accumulator current would not show up in a copper coil wound on Aluminum, but would show up on the Shellac copper coil. The Orgone accumulators electricity was some how a different kind of electricity than normal electricity. I thought this was strange for sure.

[DavidE]

[sucahyo]

Intense orgone energy known to produce electricity. However the existance of aluminium will neutralize them. So a meter without aluminium part may detect them.


Kirlian can not reliably detect orgone energy because there is too much interference from humidity or simple hand sweat.

A thing that do not show difference in kirlian test may actually has orgone energy or the opposite, thing that show difference in kirlian may not be orgone energy device.

[Steve220]

I did not know this

Intense orgone energy known to produce electricity. However the existance of aluminium will neutralize them. So a meter without aluminium part may detect them.


Kirlian can not reliably detect orgone energy because there is too much interference from humidity or simple hand sweat.

A thing that do not show difference in kirlian test may actually has orgone energy or the opposite, thing that show difference in kirlian may not be orgone energy device.

I don't know much about Orgone energy other than what I read about. I think Aluminum is one of natures strangest materials. So many things aluminum can do and cannot do. I hope to learn more about Orgone energy in the future. I do think there is something to it that needs more study. Thanks.

[Bob Smith]

Thought I'd post this - may be just a flash charge, but something to think about...
https://www.youtube.com/watch?v=I4N3...FfJZst7jDxwOkg

[tturner]

zzzzzzzzzzzzzzzzzzzzzzzzzzz