Announcement

Collapse
No announcement yet.

Newman Motor

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by BroMikey View Post

    If you would like I can remove the videos if you feel they are unre4lated? No need to whine
    But Mikey, I love whining as much as pineapple coconut Hagen daz. I'm going to assume you sincerely had the intent to help me, okay?

    Now I need you to look at this from my perspective. There is no real help I can use available. I realized that really fast and so I have taken that

    matter into my own hands and mind.




    I told you guys I knew how to automatically balance the 3bgs system. CRICKETS!

    It is a complex interdependent system requiring an automatic balancing circuit. A simple

    circuit that will teeter totter itself back and forth until it finds center.

    No it's not a PID controller which wouldn't work in this case. It is much simpler.

    CRICKETS I say!!! Do you guys think I'm a freakin' moron? Do you not even

    take time to read and comprehend what I say?




    I have designed a bolt together (pictures coming) winding frame that uses sections that overlap the ends and sections that

    allow it to be taken apart maintaining coil integrity and allowing reuse of the frame.




    No one asks about that or anything else I have talked about. Everyone wants me to do what they did or think I should do.

    I will post only in my thread. I don't care what anyone else does or says.

    Buy lots of batteries....you will need them.

    Thanks again for the attempt to help!

    Orion



    Comment


    • #17
      Again you want the moral high ground using slight of hand with rigor, that's okay, I'm game. I am glad you know many things so that I may learn so if I chose to sit and listen from now on, it's not because I don't want to share but rather hate division and attacks. When you come back to my thread, then we will talk. JB is no fan of yours and MJ is your long lost buddy. You have chosen sides. I am not interested in being out done by you as it is clear to me you are far above me.

      Remember this, all your knowledge, machines and gifts will be lost when you join the ranks thru natural causes. None of that means anything but the way you treat others lives forever.

      Your polished reasoning takes the high ground so easy, but I am not fooled. Been here before. Just because I fume, doesn't mean I like to.

      Comment


      • #18
        Originally posted by BroMikey View Post
        Again you want the moral high ground using slight of hand with rigor, that's okay, I'm game. I am glad you know many things so that I may learn so if I chose to sit and listen from now on, it's not because I don't want to share but rather hate division and attacks. When you come back to my thread, then we will talk. JB is no fan of yours and MJ is your long lost buddy. You have chosen sides. I am not interested in being out done by you as it is clear to me you are far above me.

        Remember this, all your knowledge, machines and gifts will be lost when you join the ranks thru natural causes. None of that means anything but the way you treat others lives forever.

        Your polished reasoning takes the high ground so easy, but I am not fooled. Been here before. Just because I fume, doesn't mean I like to.



        Slight of hand with rigor? I thought I was nice but I guess you read something else into it. Sorry I have offended you. Paranoid much?

        I don't know who JB is, nor do I care.

        I emailed Matt and he returned the same courtesy. We will probably never speak again as we have nothing in common in terms of what we are doing, at least nothing we are willing to talk about or share.

        I will never come to your thread again and I can't wait for you to disappear from mine.

        I did choose sides...my side...

        Please go away or must you have the final word?

        Orion


        Comment


        • #19
          Originally posted by OrionLightShip View Post



          I don't know who JB is, nor do I care.


          Please go away or must you have the final word?

          Orion

          No, I like this straight foreword approach. BTW JB is John Bedini

          Comment


          • #20
            Originally posted by BroMikey View Post

            No, I like this straight foreword approach. BTW JB is John Bedini
            Do you think channeling the deceased feelings about me are relevant to this convo? You actually used present tense so I assume you must be channeling. Cheap shot there Bro. Not worthy of my response but.....since you went there..........
            John Bedini exceeded anything I could ever hope to achieve in the field of electronics .
            There has been through the years, a lot of disinformation and unwarranted attacks against me here. I don't care if you had convo's with him about me.
            If he had known me in person, I am sure we would have been friends. I never posted in his threads nor He in mine.
            His machines were merely a demonstration of free energy. Toys that conveyed a message without getting himself killed by you know who.
            I admire him for that. However, many see those demonstrations as a end all be all and (now I'm channeling him), and I don't think that was his intent at all.
            I always knew that, but wanted more and knew not near enough to make it happen. I'm not the same person I was 15 years ago.
            So no, I'm not concerned what anyone living or deceased thinks of me besides the Mother who never deserved the gift I gave her.
            And so to look back on your "Fuming" rant comment. You are outdone by me every time you attack me.

            I now will post a picture of my winding frame.
            When I have built it and perfected it, I will make the files available to anyone who wants them, including you.
            Now, please go in peace brother.

            Orion



            Last edited by OrionLightShip; 08-07-2022, 07:32 PM.

            Comment


            • #21
              There are 8 identical pieces. 4 on top and 4 on bottom. The seams overlap and so the whole thing is bolted together with M10 bolts.
              This particular one ( changeable ) is 18" diameter, 1.5" wide channel, 2" deep channel, plus the 1" inner boundary for the bolts.

              rect hoola.png

              Comment


              • #22
                OK, that makes sense to me. I wasn't thrilled when I thought the wire was going to be in a tube because you would play hel! trying to get winds side by side in a tube. But now that I see it is going to be a flat channel, it makes sense. Around 7" for each piece? I'm wondering if I could print it on. my small printer or whether I would have to get the bigger one set up and running. Or maybe I should take. y OWN advice and do it with a bicycle wheel. I already have the strips of plastic cut to fit fro. before, so just a matter of finding the time to wind.
                “Advances are made by answering questions. Discoveries are made by questioning answers.”
                —Bernhard Haisch, Astrophysicist

                Comment


                • #23
                  You are correct! I had the same realization. It would be hell and a mess in a tube and hard to print as well.

                  I’ll print one piece tomorrow (Amazon)after my Pla gets here... don’t think I have enough left.

                  I would have to do some trig to figure out the length which I am NOT up to today hahaha.
                  So I’ll print one, measure it and let you know.

                  In fact, if it goes together right, I’ll be more than happy to ship you a full set.
                  You have always helped me and sent things my way.

                  Orion

                  Originally posted by Turion View Post
                  OK, that makes sense to me. I wasn't thrilled when I thought the wire was going to be in a tube because you would play hel! trying to get winds side by side in a tube. But now that I see it is going to be a flat channel, it makes sense. Around 7" for each piece? I'm wondering if I could print it on. my small printer or whether I would have to get the bigger one set up and running. Or maybe I should take. y OWN advice and do it with a bicycle wheel. I already have the strips of plastic cut to fit fro. before, so just a matter of finding the time to wind.

                  Comment


                  • #24
                    Originally posted by OrionLightShip View Post

                    I assume you must be channeling. Cheap shot there Bro. Not worthy of my response but.....since you went there..........

                    His machines were merely a demonstration of free energy. Toys

                    And so to look back on your "Fuming" rant comment. You are outdone by me every time you attack me.

                    Now, please go in peace brother.

                    Orion



                    BTW what is it that you are giving away? One of the prerequisites of showing a project is to introduce it by name. I have no clue what I am to be thankful for.

                    I am glad your back is feeling better.

                    I don't have a problem with you, just wanted to hear you rant.
                    Last edited by BroMikey; 08-07-2022, 10:03 PM.

                    Comment


                    • #25
                      I never thought about giving it a name.... how about the new improved ronco 2022 reusable giant coil spool?


                      Originally posted by BroMikey View Post


                      BTW what is it that you are giving away? One of the prerequisites of showing a project is to introduce it by name. I have no clue what I am to be thankful for.

                      I am glad your back is feeling better.

                      I don't have a problem with you, just wanted to hear you rant.

                      Comment


                      • #26
                        LOL, I told you the "Bowel Movement" can't have thread of nothing but coherent info no.... he has to interrupt. That's what his sponsors pay him to do. He will not take anything down either that just little ploy he uses to invoke the guilt you might feel for wanting rid of him. The poor little oppressed pile of dung the "Bowel Movement" is. I won't go on about the ill ridden, he just opens the door because he needs some support in his never ending do nothing projects he tried to post. They could just both go away from this thread and watch something evolve. But they won't...Watch!! They'll continue to interrupt. An agent and his mindless puppy.

                        Comment


                        • #27
                          Now you done it!
                          Hahaha ok now we have Matts point of view.
                          Time to go back to your thread Mikey. I keep asking you to go but you don’t. If you want the file send your email in PM. Stay in your lane and I’ll stay in mine. Here’s a thought if you want to work on something together then let’s gang up on Bi. Did you realize he misspelled his own name? Hahaha.
                          Now please go before I get the urge to be pissy again. I grow weary of the drama that always follows you.

                          Orion



                          Originally posted by Matthew Jones View Post
                          LOL, I told you the "Bowel Movement" can't have thread of nothing but coherent info no.... he has to interrupt. That's what his sponsors pay him to do. He will not take anything down either that just little ploy he uses to invoke the guilt you might feel for wanting rid of him. The poor little oppressed pile of dung the "Bowel Movement" is. I won't go on about the ill ridden, he just opens the door because he needs some support in his never ending do nothing projects he tried to post. They could just both go away from this thread and watch something evolve. But they won't...Watch!! They'll continue to interrupt. An agent and his mindless puppy.

                          Comment


                          • #28
                            Originally posted by Matthew Jones View Post
                            I won't go on about the ill ridden, he just opens the door because he needs some support in his never ending do nothing projects he tried to post. They could just both go away from this thread and watch something evolve. But they won't...Watch!! They'll continue to interrupt. An agent and his mindless puppy.

                            Fantastic positive contribution to move the group effort forward! Your insight and suggestions continue to amaze and astound. LOL.

                            “Advances are made by answering questions. Discoveries are made by questioning answers.”
                            —Bernhard Haisch, Astrophysicist

                            Comment


                            • #29
                              Monsoon, Electrical Storm, Flash Floods Oh My

                              Comment


                              • #30
                                PLA confirmed delivery today!

                                Comment

                                Working...
                                X