Joulethief SEC exciter and variants

[totoalas]

Slider
ive just fried 6 Mpsa06 wth 12 v last night coz Ive changed the L2 turns from the usual 9 to 4 t it brghtly it the 8 w lamp and arc along the wires and just fired the transstor even with tranny mod

so thats it for the day

so definitey YOUR ADVICE DONT FRY THIS AT HOME !!!!!!!!!!!

From now on only use low voltage supply like wall adaptors...

enjoy your weekened

totoalas

[ricksl]

not alot done tonight and thanks for taking my sluggishness with a grain of salt, but tonight i ripped apart a circuit board i found in my basement that i think i salvaged from a printer a few years ago, no idea what the circuit does in the least ive tested it traced pins and still could come up with that at the most it was an oscilator of some sort

any way not to get too off track i salvaged an inductor coil from it and put it in place of the secondary and wrapped some wire around it and got my choke exciter working. not nearly as nice as my other one, the only way to get a big field is by few windings and like totallas just mentioned it fries transistors... wish i would've read that post before i did that. so in this picture i was just showing it running leds with alot of windings to keep it safe as that is my last mpsa06. no clue the current draw almost blew a meter. well thats my second post for the month better slow down.




sorry for the poor camera quality my mum just ran off to a concert and took the good one,

[Slider2732]

Yep, these smaller transistors really don't get along with much above 6V. As noted to Jonnydavro, 1.5V to 6V all is great and power increases, at 7.5V some wacky internal heating begins even when heatsinked, above that the transistor will blow. That goes for around 2 dozen different types that i've tried.
I'm quite convinced that when there is no smoke, no transistor actually blows...it shuts down, folds its arms and stares at you, with the expression being 'just dont even think about connecting me up again mister' hehe

I noticed the type of choke you used ricksl, will give one of those a go !

[jimboot]

Decided to have a. Bit of a fry up myself tonight! Went through about 6 trans on my 12v sla. Lit about 70 LEDs 2 neons a 20 w cfl and some great plasma effects. Running at 300ma tho I have attached the 2222 to a giant CPU heat sink.was even lighting an incandescent 40w standard household bulb at one point. Down to my last tranny tho so I am only connecting for seconds at a time. The av plug on my dvm was measuring well above 400 v then nothing as i got closer to the tower as it only goes up to 500v. Had some fun tonight and got my wife worried

[Slider2732]

After just watching Slayer's incredible vid of the Hartley exciter on 12V and with the transistor not even warm, it made me realise how important current use is to the transistor itself. I've got a couple of variable caps and haven't got them doing much yet..will have to see what happens there with spontaneously combusting issues.
Ultimately, SMD transistors and chokes could create nano Slayer's, the size of a finger nail
One regular trick for transistor longevity over here, is to use 'common or garden' types for tests, then swap to a turbo performer for a final run. It allows for quick comparisons as a method too. 2N3904, or 9014 are very capable NPN's and found on anything. Grab a discarded TV off the street or put an ad on Freecycle etc and you should get plenty of things for wives to worry even more.
My own total investment in this whole thing so far is about $12 - because my other RS soldering iron burnt out and I needed solder ! Everything else is from junk.
Funny thing, to think of a TV as a renewable energy source..which it is, kinda.

[slayer007]

In this video I'm just showing a different exciter circuit.

And the nine leds being light from the field around the source battery.

YouTube - New Exciter Circuit

[Slider2732]

At 62 pages into the thread....here we go again !
Very neat and efficient new circuit there
Does it or will it have a name ?

I'll probably post this video of mine in the 'Star Wars' thread recently started by Cherryman...and I hope to have that as an audio thread perhaps, for others to post their plasma speaker work.
But it features something of interest to this thread --- moving the L1 to INSIDE the L2.
2 turns of bell wire now sit inside the tower, after I was thinking of ways to tidy up the Walgreen AT plasma speaker.
As a bonus to all of this, I can now vinyl style scratch house music recordings with a pencil, as they play through the plasma !!!!

YouTube - Walgreen AT - a few more plasma audio tricks !

[totoalas]

Freecycle

capable NPN's and found on anything. Grab a discarded TV off the street or put an ad on Freecycle etc and you should get plenty of things for wives to worry even more.
My own total investment in this whole thing so far is about $12 - because my other RS soldering iron burnt out and I needed solder ! Everything else is from junk.
Funny thing, to think of a TV as a renewable energy source..which it is, kinda.[/QUOTE]

Hi Slider
why not include microwave ovens too lol
Multiple L2 on L1 I think your coil can easily handle this

Circuit description on post 636 AND 668
http://www.energeticforum.com/101788-post678.html
Another one from jiffy

YouTube - Getting ready for more experiments with the Slayer Exciter
Slayer
as the Iphone4 ad says HERE WE GO AGAIN

cheers

totoalas

[totoalas]

moving the L1 to INSIDE the L2.

Hi Slider
Check Mopozcos channel also
But it features something of interest to this thread --- moving the L1 to INSIDE the L2.
2 turns of bell wire now sit inside the tower, after I was thinking of ways to tidy up the Walgreen AT plasma speaker.


http://www.energeticforum.com/112926-post1167.html

cheers

totoalas

[Slider2732]

Or, L2 inside L1
No idea why I often confuse the two. The thick one usually being on the outside of the tower might refer to myself lol
Hey thanks for showing that...

[jimboot]

Or, L2 inside L1
No idea why I often confuse the two. The thick one usually being on the outside of the tower might refer to myself lol
Hey thanks for showing that...

Constantly guilty of doing the same

[jimboot]

new vid from Dr Stiffler
Stiffler's Space Energy Coherence (SEC) lights up

[xee2]

new vid from Dr Stiffler
Stiffler's Space Energy Coherence (SEC) lights up

I suspect that the power is going into circuit through capacitive coupling of foil around battery to the negative battery plates. At RF a capacitor looks like a direct connection (something Maxwell discovered over 100 years ago). If this is not true, then why does he need the foil around the battery. If true, then using the foil is like putting a capacitor across the 100K resistor. Once the circuit starts oscillating at RF frequencies the power will go through the capacitor and bypass the resistor.

[Slider2732]

That's a good hypothesis, bringing thoughts of replicating the battery foil idea as a battery holder. I'm always a fan of having something do more than 1 thing (from micro aircraft interests). Also good to see Dr. Stiffler in full effect too, as I believe he has had health issues, let's hope the pioneering gentleman recovers quickly

Attached is the PNP transistor MegaTest
I'd like to know if the .pdf can be opened and viewed correctly, it's the first one i've done.
The lists of both NPN and PNP small TO-92 transistors are within, the PNP list seeing a much better working method, though with fewer tested up to now.
An ongoing update of the list is hoped for, if it's of use to you guys.

[totoalas]

Attached is the PNP transistor MegaTest
I'd like to know if the .pdf can be opened and viewed correctly, it's the first one i've done.


NOW EVERYTHING GOES !!!! SLAYER STRIKE ANYWHERE LOL


totoalas