New Magnetic Forces! : Steve Ward

[nilrehob]

@erfinder, Great find

Hopefully, as more and more information surface,
and as forums like this one, among many others, conducts experiments and make findings totally public,
inventors will have to express themselves clearly without hiding any details whatsoever,
or they will quickly be bypassed by others and their work will be more or less in vain and forgotten.
Totally open is the only way, as i see it, and everyone will benefit from it.

/Hob

[erfinder]

@erfinder, Great find
/Hob

Just doing my part....

Here are two roughly 1 year old videos where the experimenter Thane Heins where is preforming a test which is directly related to the subject.... his setup in these videos is almost identical with the first device that Steven Ward demonstrated in his presentation video. I wish Thane had given this particular configuration more attention, when compared to some of his other experiments this one was conducted rather poorly.....but it works, and thats what matters....

For your viewing pleasure...adjust the volume its loud....

YouTube - ThaneCHeins's Channel

YouTube - ThaneCHeins's Channel

Regards

[nilrehob]

But instead of a rotating plate you can have toroid coils shutting on and off the magnetic field:
Solid State Orbo System
Really cool i think!

/Hob

[erfinder]

But instead of a rotating plate you can have toroid coils shutting on and off the magnetic field:
Solid State Orbo System
Really cool i think!

/Hob

Interesting idea they have there...I would have gone another way, certainly wouldn't have gone with the Orbo Toroids.... personally I believe there is much to be gained in constructing a mechanical device....I think a perfect understanding of the mechanical will reveal the perfect solid state configuration. I'll keep my fingers crossed for those guys over there, my hopes aren't high however, as they have chosen to skip the basics and the valuable lessons which can only be experienced through a mechanical apparatus.....but thats just my 2 cents....I could be wrong and probably am.

Regards

[Energy-Ingenuity.com]

Wardforce

I have filed another patent for a Permanent Magnet On/Off Induction Switch. On my website, a list of materials needed, drawings, video, ... so that anyone can build or have built a device that will allow them to isolate Wardforce from the North and South Poles.

If we don't teach others what we have learned, what good does it do for the future of our children, or ... mankind? Build one and you will know how it works!
Energy-Ingenuity.com

PS sorry about taking so long to get back here, and thanks for asking questions,
Steve

[Energy-Ingenuity.com]

I have not heard of anyone else claiming a part of the Magnetic Field that can be isolated from the North and South Poles. If someone else has devices like we do, they did not understand how it works or they would claim Wardforce exists and can be manipulated for producing torque. Anyone can isolate this force from the Poles, with instructions, list of materials needed, video, ...

[phoneboy]

Very interesting. While looking at your site I couldn't help but notice how the image you have of the magnetic switch looks an awful lot like Butch Lafonte's switcher.

[Energy-Ingenuity.com]

Switching the Field on and off.

Some points about this discovery that other need see:

1. Part of the Magnetic Field that has been isolated from the Poles!
2. Changing only speed, causes 3 different reactions!
3. No air gap between the source (Magnet) and the pickup coil, cuts waste!
4. Flux density is #### grater with no air gap!
5. The Magnetic Field relates to everything!
6. Anyone can isolate Wardforce from the North and South Poles!
7. This is the "information age", not the "dark ages" anymore!
8. We have caused the aging process of some compounds to accelerate, tremendously, trying to understand more Wardforce!
9. Other things I can not even explain at this point, A PART OF THE MAGNETIC FIELD THAT IS NOT A POLE!

Anyone can help by telling others about Wardforce!

[sebosfato]

hello

Very nice Steve,

The nicer thing is that you already got a patent so you can actually teach the process of building without worries so your invention can get developed by many fast and get to the market for usage very soon. Congratulation!

I'm willing to know more about.

Thanks for the effort, remember you are not alone.

[Energy-Ingenuity.com]

Open source

Knowledge is something to share with everyone! Who will I share this knowledge of Wardforce with? Who wants to know that we have been looking at it the wrong way? Who do you know that gives cause and effect, with regards to "the Poles swap on the Sun every 22 years"? Not only can I give the cause and effect, but I can demonstrate cause and effect.

With a list of materials needed, drawings, videos, ... FREE at Hand drawings anyone can build a device allowing them to isolate Wardforce from the North and South Poles.

@erfinder, Great find

Hopefully, as more and more information surface,
and as forums like this one, among many others, conducts experiments and make findings totally public,
inventors will have to express themselves clearly without hiding any details whatsoever,
or they will quickly be bypassed by others and their work will be more or less in vain and forgotten.
Totally open is the only way, as i see it, and everyone will benefit from it.

/Hob

[Turion]

Steve,
Thanks for everything you have shared with us so far, but honestly, I have read through everything on your site, watched the videos, and I doubt that I could successfully replicate your device.

If you really want people to replicate you need to give us some specifics. What are the part numbers of the things we should get so that we make an exact replication? I'd be on my way to the store in a heartbeat if I thought I could actually find what I need, but right now I doubt I could.

If you have the time, it would help if you put together a step by step video. You have showed us parts, but when you say that this piece of plastic goes here, I need to know the dimensions of that piece of plastic if I am to replicate.

Also I don't see any kind of wiring schematic. I hope it is not just me who is having this problem or I am REALLY going to feel like an idiot!

UPDATE:
I sent Steve an e-mail and he was kind enough to respond by calling me. We spoke for quite some time, and now I understand exactly how to build the switch. Thanks Steve, for all the help!! It may take me a couple days to come up with parts, but then I will be replicating this.

erfinder,
I looked at the patent you posted and at Thaine's videos, and I would have to agree that all three of these devices are very similar in concept. All three eliminate the movement of the magnet past the coil, so that Lenz is defeated, yet allow for the change in magnetic field to harvest energy from the coil. This is all very interesting. Don't know where it will lead, but there is enough information from these sources that some of us should be building some things and reporting back. I will do a step by step video of my build of Steve's device and post on YouTube. After that, will try and duplicate what we saw in Thane's video.
David Bowling

[machinationu]

Steve,
Thanks for everything you have shared with us so far, but honestly, I have read through everything on your site, watched the videos, and I doubt that I could successfully replicate your device.

If you really want people to replicate you need to give us some specifics. What are the part numbers of the things we should get so that we make an exact replication? I'd be on my way to the store in a heartbeat if I thought I could actually find what I need, but right now I doubt I could.

If you have the time, it would help if you put together a step by step video. You have showed us parts, but when you say that this piece of plastic goes here, I need to know the dimensions of that piece of plastic if I am to replicate.

Also I don't see any kind of wiring schematic. I hope it is not just me who is having this problem or I am REALLY going to feel like an idiot!

UPDATE:
I sent Steve an e-mail and he was kind enough to respond by calling me. We spoke for quite some time, and now I understand exactly how to build the switch. Thanks Steve, for all the help!! It may take me a couple days to come up with parts, but then I will be replicating this.

erfinder,
I looked at the patent you posted and at Thaine's videos, and I would have to agree that all three of these devices are very similar in concept. All three eliminate the movement of the magnet past the coil, so that Lenz is defeated, yet allow for the change in magnetic field to harvest energy from the coil. This is all very interesting. Don't know where it will lead, but there is enough information from these sources that some of us should be building some things and reporting back. I will do a step by step video of my build of Steve's device and post on YouTube. After that, will try and duplicate what we saw in Thane's video.
David Bowling

Any links?

[Farmhand]

What is the total efficiency ? does it produce more work than he energy consumed to make it work ?

I'll watch the video's later if there is any input/output figures.

CHeers

[Dave45]

I couldnt figure out what he is spinning, is it a magnet, iron or plastic

[Energy-Ingenuity.com]

It is on my website

I couldnt figure out what he is spinning, is it a magnet, iron or plastic

You can find labeled drawings on my website, which are free to everyone, hand and CAD drawings. Again, I offer anyone to come see, test...

Energy-Ingenuity.com