Steorn is open -Panacea has a license

[ashtweth]

Hi Juju There is nothing wrong with any one posting , but doubts , interference and nothing to do with the official plans and testing is certifiably for another thread. It just takes up our time and makes no sense for people to comment on the orbo who don't know what it is.

That is not the ORBO i said that 3 times , why would any one comment on what the orbo is if they have have not got the official plans? Then say "this is the orbo" it doesn't work...do you realize how stupid that is? am i from another planet?

DO YOU SEE ONE PERSON FROM THE OFFICIAL STEORN FORUM SAYING IT DOESN'T WORK? Clanzer is doing well BTW.

it is nothing like the official plans or whats going on at the steorn forum, i already spelled that out, instead of us working on a drive circuit i have to come in and post this. This is why i asked nicely to respectfully let us get on with the job. Thanks

Ash

[EthelAether]

Hi Juju There is nothing wrong with any one posting , but doubts , interference and nothing to do with the official plans and testing is certifiably for another thread.

Or not, since you've gone and deleted the thread which I created to discuss the Orbo vs. TK Orbette debacle.

You put yourself forth as an open-minded altruist, but your actions don't bear this out.

[ashtweth]

I didn't delete your thread, since when have i got the power to delete a thread, can you see into the future like you can see Steorn's progress ? In fact i didn't even complain i posted in there to help you guys consider some things , it was helpful too.Admin probably didn't like those type of posts, who needs to read them any way IMO. I had nothing to do with it.

So i posted in there to help you guys and for that so you assail me and accuse me of some thing i didn't do, much like your comments on Steorn, some thing you know nothing about.

I wasted 10 minutes posting in your thread to help clear up what you were saying. It wont happen again my friend. Pretty silly comments about me too. No one takes kindly to unfounded accusations or in accurate ones the same as the Steorn comments. What a waste of my time. Ill ask you nicely to kindly refrain from posting this type of post in this thread Thanks. Who wants to read it , I certainly dont need too.

Ash

[ashtweth]

Guys just a quick up date We have our part now for the E Orbo and hope to assemble it finally this weekend

Ash

[ashtweth]

Hi All

Finally just about assembled just waiting for a final instruction now on how the top mounts exactly..


(missing the other 3 coil mounts they were done after this post)

Andrew tells me he had to do a bit more machining to optimize the kit,might be a little more install (bugs) after the first runs so please be with us guys but getting there . We have 2 extra disks for more power and estimate to be able to run it at between 1.5 and 16 volts with the super cap.



Super cap will run the load ,still deciding what the best load is,the drive circuit needs tuning too, things that require playing with, please bare with us guys.Already started filming our Steorn production to help and support all. This important detailed production will have many tests of all devices and will also show how important all our open source work is.
more to come.

Back to work.

Ash

[Slovenia]

Great Workmanship!!

Hi Ash,

Thanks so much for posting pics of your new toy. The workmanship is very nice. I am very interested in your device. I'd like to see some more pics when you are done if that is allowed. Thanks!!

Best Regards,
Slovenia

[tjnlsn255]

Hi Ash,

Will we be getting another update soon?

Could you tell any info about the coils? They do not look like there is very much wire on them?

Hopes and Dreams....

Tj

[gravityblock]

@Ash:

The top magnets are slightly offset to the right of the bottom magnets from what I can see in the pictures. I never noticed this with the eOrbo Steorn was demonstrating. Is this an alignment issue you are aware of, or do the dual magnets actually have a slight offset relative to each other.

Thanks,

GB

[ashtweth]

Hi All. thank you very much for the extra help guys. Yes i am gonna show you guys every thing possible and even put in a special request with Steorn that we can show confirmed LOADED test runs/data to help make it self evident to the open source community what this baby can do. And tests you can request.

So dont give up yet and please hang in there my friends. No one is more anxious to get this back for you guys then me trust me on that .

its a bit tricky for most on the forum to get the magnetic bearings lined up and other things, but there is a sincere loyal member on the SKBD that Andrew tells me is working around the clock to help every one get the kit together (little tweaking is needed). Like the Solar amplifier the instructions came after the kits LOL

So more assembly this weekend and switching tests , update to follow

Chances are guys we will have the solid state done before this, I am told they are working on a prover circuit which comes with a SKBD membership ATM. Will have more news as soon as i find out guys. Thanks for the tips.

[ashtweth]

Guys after 2 fuel saver installs over this weekend and filming on the TS, we managed to get the troublesome bearings done and got it spinning..power soon. we need to test a few optical switches..plus fine tune the configurations and get the wave forums then will apply a load

No time for small talk in this forum
quick Mobile Phone of it spinning.
MEGAUPLOAD - The leading online storage and file delivery service

The Panacea Steorn production is HUGE, its Going take us 4 weeks to film it, but it will be a productive one

Ash

[kippered]

Setup is looking good and quite excited about watching this project unfold! Thanks for keeping it an open forum for the many lurkers (like myself) to watch.

[tjnlsn255]

Hi Ash,

It sure would be very helpful and inspiring to get a few pictures and text of what is happening day by day or every few days so that we can keep in touch with what you are doing ....

It is very depressing to hear that it will be months before you publish a video..... please keep throwing us bread crums along the way....

Hopes and Dreams....

Tj

[ashtweth]

Hi Tj, the results from tests will be published before our video production As soon as we make progress on the device we always report. just for you tho

Today i got up had a shower and brushed my teeth. I am going to a dyno test now, i stopped to get some organic food and soonn as i get back am working on the inductance tests of the steorn coils. So Do you want a web cam?

Soon as we know you will know my friend.

Ash

[tjnlsn255]

Hi Ash,



A web cam of the spinny orbo each time it is worked on would be awsome.....

I do not think we need a web cam of your personal life...no thanks....LOL

Sorry Ash, it is hard to be patient this is very exciting stuff......

Hopes and Dreams....

Tj

[ashtweth]

The web cam today would of showed us pulling our hair out (cursing) Yes we curse at Panacea, as the inductance's on ALL the coils were all out . So the Paint did not work, we are just gonna use new cores with the plastic on, too much time delay with this paint

We have to re wind all coils now , fun fun fun. Got a new drive circuit on the way for it tho, they made some progress on the forum with it guys. Dam paint pain in the butt!!!