Steorn is open -Panacea has a license

[TanTric]

ok its very possible that they can last a few years...

but, magnetic energy is not so powerfull to produce torque, i allready played with a small toy trying different magnet setups, and you can easily put your rotor to do half revolution, or even 1 revolution with just a little push... but what i perceived is that when the rotor was moving i can easily stop it, and my magnets were quite strong!

do you know how much machanical force/torque you must put to drive a generator of 10 kw?

i dont know either, but im not seeing any kind of magnet motor producing the kind of force that can drive a generator that also will slow down the MM with the lenz law!

can you educate me about the process of re-magnetizing a magnet?

@all sory the offtopic

Alinco magnets have a low coersive force so yes, they will demagnetize. However, neodymium and ceramic magnets do not demagnetize easily. But as you said, lets say the motor runs for 1 year and lets say its puting out 10 kw non-stop. At the end of the year you just remagnatize the magents for a small amount of energy. So you have a very good source of cheap clean energy where you only need to "refuel" you motor once a year.

However, that being said, I seriously doubt that neo magnets would run down in a years time. I think they would last for several years.

[EthelAether]

Why r u putting more pickups on your eorbo??

[ashtweth]

Hi EthelAether, If you take a look at the device which was under open house on display in Dublin:http://panacea-bocaf.org/Orbo%201.jpg

Which BTW was investigated by a volunteer known to us, You can see that you can put extra pick up coils to extract more power.
More:Steorn)

Ash

[tjnlsn255]

Hi Ash,

Any idea when you might have the rotor version together and running?

Will the pictures and/or videos of it be posted here in this thread?

Hopes and Dreams....

Tj

[ashtweth]

Hi ALL, Many thanks to Paths and Admin's help for their help in cleaning the thread.

@tjnlsn255, yes we will my friend, we will be making a video production on Steorn to support the community, help FE and Steorn in general. We will also be posting and accepting as much requests as we can.

We should be able to finish our cores this weekend, had some slight prob's with the shelite and the plastic, so we had to wait a few days and give them a few coats of paint. Yfrog Image : yfrog.com/bccoresfj

Cant give you a ball point as this kit is not with out its surprises .Yes will post every thing in this thread my friend.

Regards
Ash

[thedude]

Yay! Sweet lookin cores Ash! Very excited to see some project imagery. I know first hand how busy all this business of fabricating, experimenting while web documenting can make a person. :P Coupling all that together while working to support one's self can be excruciating at times. Thanks for all your effort here.

I am watching closely while educating myself with steorns SKDB. Have done all the physics primers, which were great. Can be found on their youtube channel. Highly recommend them. I wish i had something to offer the discussion. Until I can, I'm going back to putting my face too close to disruptive discharges!

[ashtweth]

Okee Dookie...One of the trustee's tells me a developer has replicated the solid state Orbo (wave form and secondary energy) on the private license Steorn forum, they are still sorting an improved drive circuit for it tho guys.

We have assembled the rotor version partially and just waiting for some instructions.. coils are wound ready to spin it and load it after we know how to put together.



Solid state is done and working on a drive circuit for it now.
Am only allowed to post the results of tests from now on guys

Back to work for me
Ash

[Dingus]

Solid state is done and working on a drive circuit for it now.

You don't mean what I think you mean do you?

[brenie]

Ash, great that you contiue to provide so much info:
Best wishes for the project.
And I hope you mean what Dingus thinks you mean. If you see what I mean.

Regards, Bren.

[tjnlsn255]

Hi Ash,

So you are says that you can not tell us the size of the magnets and the coil specs? Wire size and length kind of stuff?

So there will be more pictures and videos, right?

You can get very detailed in how you show it to us, right?

I am getting a little nervous about this whole thing.....

Well at least I will know that you did/did not make it work.....

Hopes and Dreams....

Tj

[EthelAether]

So y ru building the e-orbo motor? I read that Steorn doesnt support that now..

[ashtweth]

Hi EthelAether, tjnlsn255 and ALL

Okay we are about another week away for the E Orbo due to the parts not being included in the kit, i guess every one is only human , it put us back on the SS also but never mind progress is imminent now.

@ EthelAether, technically no not really, not because it "didn't work" i would not put it like that my friend, the E orbo was the best way for them to show a proof of principle for demonstration purposes, i dont think they had thought of the SS then or had it READY.

Dont forget the reason why Steorn have developer licenses as it NEEDS DEVELOPMENTAL aid, they give you the principle, you must then develop it and apply it into an application,. Still bugs to work out and tests to be done, but the E orbo for us was the quickest way to prove the principle and validate it for all, which is why we are focusing on it FIRST then will help them on the forum with the SS.

SS is the cheapest power to weight ratio then the E orbo, dont forget Steron needs help to make this into some thing workable and all the engineers are on no budget there. But we are there to help

[Michael John Nunnerley]

patent?

Hi Ash

I have not looked at the patent or application yet but this alone should give all that is needed to build a replication.

I have a patent and I had to give independant proof, "university", and disclose full information for it to be accepted and in all the costs were well over 20k sterling.

As with these licenses that are being issued for further development, for me, something does not ring true with what they are doing AND a patent application!

I reserve my judgement on this until I could read what you have signed in relation to an agreement! can you let me see a copy of that agreement? PM me and I could give you my e-mail address, if you do not already have it

Mike

[EthelAether]

no patents, sry.

[ashtweth]

Hi Mike. There has never been a replication i know of where some one has reproduced the device Exactly as claimed based on the [FREE ENERGY DEVICE] patent, if so, its certainly not possible with Steorn , you need to be at the forum so its prob best for you to monitor our results my friend.

Check out the Steorn website for all your Q's i cant move mountains that i am not legally allowed to mate

There is a lot of things people don't know till they get to the site and read. It was a little unclear to me too . This is why this thread is a better place for just RESULTS reporting. Let me know if you have any probs finding the info from their site its all there.

There are a few tricks which is why there is no Steorn open source version that's the same...can't same too much more my friend, that's why we are just there to get RESULTS REPORTED FIRST.

Ash