If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hmmmm... Here's a couple of clues for u guys. Number 1. E=MC2. Number 2. Gravity was invented 300 years ago because an apple fell on some guys head.
LOL Vickers. If e=Mc^2 - and a photon has zero mass - then where does the energy come from that moves the photon at light speed? Zero x any number at all is always zero. I know there's an answer to this somewhere. But one tends to forget that even fundamental mainstream physics has embedded contradictions, qualifications. exceptions and variations. Where we're told that a rule is a rule is a rule, in fact - at best - it's an approximation. The only thing written in stone is that energy is usable. That, and that we can't measure beyond light speed. Else, the most qualified are grappling with the best and worst of us. And you're right. It's as well to remember that gravity was never resolved in Einstein's General Theory. The questions are still out there. Lots of them. All over the place. At least Dave is pointing us to a possible source.
LOL Vickers. If e=Mc^2 - and a photon has zero mass - then where does the energy come from that moves the photon at light speed? Zero x any number at all is always zero. I know there's an answer to this somewhere. But one tends to forget that even fundamental mainstream physics has embedded contradictions, qualifications. exceptions and variations. Where we're told that a rule is a rule is a rule, in fact - at best - it's an approximation. The only thing written in stone is that energy is usable. That, and that we can't measure beyond light speed. Else, the most qualified are grappling with the best and worst of us. And you're right. It's as well to remember that gravity was never resolved in Einstein's General Theory. The questions are still out there. Lots of them. All over the place. At least Dave is pointing us to a possible source.
Not to forget his powerful 2nd "helpful clue" about gravity
come on guys...help me out here..i live in salem oregon...my invitation stands solid ...any one ...get a message to me i will show one person or a group of people what i have found ..ask.any questions ..if anyone does not see this wave form with their own eyes..i will remove all posts and videos and post no more....what have you got to loose???this machine works ...you have got to be curious ..send some you trust or come see for yourself...please ..i have nothing to hide ...think about it...i will be in lincoln city today but home in the evening...you will NOT be disappointed....
Hello, David.
I live not too far from you, and would like to see this with my own eyes. Will you show me if I make the trip? See my PM.
i went over some indoor photos...yuk..there is or was 1 video that was posted but it was the wrong one ....well, now it is the right one ...day light works good for HD....i was gonna tell you this,,,the quartz was sitting by the generator all day...usually our TV goes to a blue screen .. this time there was bands of color ,rainbow style ..should have took a pic...i always wanted to be a part of it, seems like now i am the start of it!....now we can bend light...."no lens" lenses....i set up an experiment today , getting ready for video about how Ed really moved those stones....the experiment worked good...does any body remember seeing crop circles w/ 24 segments? how many original stones in outer ring at stone henge...are there any other monuments w/ 24?....i remember seeing petroglyphs with wavy lines and spiral designs....they saw this too...i want every one to see and feel this energetic new wave.....cant wait for someone to try and verify the telescope experiment... i will post pics &vids tomorrow.....tell all leedskalnin people what is going on over here......they are going to flip........david
Just happened my wife had this page up and if you count the segments around the outer rim of this crop circle there are exactly 24. Look about half way down the page for the second crop circle shown (it's the one with a sort of Mobius triangle in the middle). Click Here
There is no important work, there are only a series of moments to demonstrate your mastery and impeccability. Quote from Almine
Hi all.
I tried to make a setup with dimensions just like David has. I used 33mm diameter pipe with 3mm thick walls. I cut it to 50mm long pieces and then I cut them in halves. This is as close I can get to Davids dimensions using what I have available. I used zip ties to compress all the parts together. I hotglued an acrylic piece from my previous experiments on a fan (magnets removed) and I hotglued the 24 iron pieces on that acrylic plate. Then I energized the setup. I checked if there was a short to the iron pieces and there was. The inner diameter of the backs of the pieces is about 120mm, so very close to Davids setup. Anyway, I don't see any waves, the lased gives no result, also I feel nothing with a big quartz cluster stone. But when I held a heavy piece of iron on top of the device, it kinda felt like it wants to move somewhere, kinda like there were some magnets underneath. At this point this should not be taken seriously, because the feelings could be just subjective. I also tried to rotate the setup under infrared light. Interesting thing is that if I rotate the wheel just slow enough, at about 1rev per second, and if I look at the center of the wheel, I can see green color inside each of the bent tubes with my periphery vision, don't know, might be my eyes playing tricks on me. If I look at the wheel like this longer, I can see transitions from red to green color spectrum, like rainbow, but with the blue and violet color missing. When the wheel stands still, no colors, the iron pieces look just gray. I tried to capture this on photos but no luck. That's it for now. Will test this setup some more.
Thank you!
It's better to wear off by working than to rust by doing nothing.
bruce...first,let me say i am big"fan"of yours...your work gave me insight...i will start work today on #2 ..i know that i can reproduce this ...i almost want to send you #1....either way ....yes,yes and YES..........you are one of my heros....i do not know where you are but if you want...call me .......i cannot thank you enough......david
Hi all.
I tried to make a setup with dimensions just like David has. I used 33mm diameter pipe with 3mm thick walls. I cut it to 50mm long pieces and then I cut them in halves. This is as close I can get to Davids dimensions using what I have available. I used zip ties to compress all the parts together. I hotglued an acrylic piece from my previous experiments on a fan (magnets removed) and I hotglued the 24 iron pieces on that acrylic plate. Then I energized the setup. I checked if there was a short to the iron pieces and there was. The inner diameter of the backs of the pieces is about 120mm, so very close to Davids setup. Anyway, I don't see any waves, the lased gives no result, also I feel nothing with a big quartz cluster stone. But when I held a heavy piece of iron on top of the device, it kinda felt like it wants to move somewhere, kinda like there were some magnets underneath. At this point this should not be taken seriously, because the feelings could be just subjective. I also tried to rotate the setup under infrared light. Interesting thing is that if I rotate the wheel just slow enough, at about 1rev per second, and if I look at the center of the wheel, I can see green color inside each of the bent tubes with my periphery vision, don't know, might be my eyes playing tricks on me. If I look at the wheel like this longer, I can see transitions from red to green color spectrum, like rainbow, but with the blue and violet color missing. When the wheel stands still, no colors, the iron pieces look just gray. I tried to capture this on photos but no luck. That's it for now. Will test this setup some more.
Thank you!
i am confused also.......can you call me..PM me and i will give you my number....i will not slow down till you get the same effects...i am going to build a second model for bruce tpu...this build will be a start to finish build video..i wiill start today..i know you will be watching ...please call me.....david
The total length of the V shaped magnets is most likely very important. It is most likely vibrating/resonating at the speed of light. This link below goes into more details about the total length of the ford V magnets and light.
Please take a look at the second picture!! I have blown it up. Look carefully at the top of the pipe pieces. The rotor is not moving! It is in the exact position as the first picture! Look at how clearly defined the grass...
It appears to be a near perfect circular distortion...
What say ye?
Cheers,
Bruce
very odd ? i used an AIPTEK HD video cam that also shoots 8 mega pixel still photos i was trying to get the best resolution...bruce...i gotta go and get my work boots on!!......david
Please take a look at the second picture!! I have blown it up. Look carefully at the top of the pipe pieces. The rotor is not moving! It is in the exact position as the first picture! Look at how clearly defined the grass...
It appears to be a near perfect circular distortion...
What say ye?
Cheers,
Bruce
very odd ? i used an AIPTEK HD video cam that also shoots 8 mega pixel still photos i was trying to get the best resolution...bruce...i gotta go and get my work boots on!!......david
if you are getting magnetic lock ..good my device locks barely but the effects are there...has any one eise felt a cold feeling around their PMHs??i am talking about a standard 2 junction U shape w/ flat top....Eds geterator is a PMH also but with 24 "junctions" as to not confuse i will refer to the #s when talking about them...jet can you call me? it seems appropriate that someone from Eds country replicates this device.....dont you think?...jetijs...if you call i canwalk you through it PS....you WILL get results!....i know our times are different ..call when it is good for you i do not care what time it is ...i will wake up for you also i am getting more phone cards so that i might call you instead....either way ,i look forward to the future AND talking to you........david
Another Idea, since it should be g-waves.
Maybe it depends at the Place, and David lifes on a special Place.
May something for a Sunday afternoon, to drive few miles, and see, if you can cross a Erathline.
Theorizer are like High Voltage. A lot hot Air with no Power behind but they are the dead of applied Work and Ideas.
these were taken with a fluorescent type UV LIGHT...i do not have enough space for these files very very interesting photos...how can i get these uploaded??................david
David, you probably have used up all your forum attachment space. You can use some free image hosting services, such as ImageShack® - Online Media Hosting
Just upload your picture there and post the direct link here. Here is a test picture from my computer:
It's better to wear off by working than to rust by doing nothing.
Comment