gravity waves found

[witsend]

Nice simple build, I was very interested in slotted pipes like you crafted. Recently I read that current is subjected to some sort of centrifugal force, taking the most outward path around a bend. I can imagine at some ratio, also flux might take the outside path, despite some hurdles to overcome, to a least stay on the outside.

I wonder if the relevance of that apparatus could be explained to the Lambright effect?

Does your PMH have magnetic attraction to iron filings etc? The effect on the overhanging magnet becomes either more or less significant dependin on your answer, I suppose.

Surely if magnets are being used then filings would stick? I would have thought. I tried this on my own rig and with magnets attached it certainly holds those filings.

[sucahyo]

The question is how he generates those fields to create the effects.

Many failed to replicate it...


BTW, I just found weird coincidence. Jetijs and david lambright PMH produce black glow. People body emit white glow. As reference Schauberger repulsin emit black glow.





Maybe, possibly, suppose, there is chance that black glows indicate anti gravity?

[witsend]

Maybe, possibly, suppose, there is chance that black glows indicate anti gravity?

I'll tell you what. If you're right then there's a very real correspondence to the 'dark' matter that our scientists are looking for. Golly. You may be onto something sucahyo.

[witsend]

DAVE - if you're reading here. I can't reply to your email. Something's wrong. And the PM doesn't allow me answers - for some reason?

I'll try again later. Check your email. Mine seems ok to send so it may be something corrupted at your end.

[david lambright]

wit...

can you tell me if you tried the experiment?

[spiralout]

@Sucahyo,

Dude, you are a wizard! If it's not to much of a trouble, could you analyze this picture for me? Thx in advance.



Cheers,

N.Madog

[witsend]

Cheers,

N.Madog

NEAT STUFF spiralout.

For those that are struggling to see the glimmer on youtube - the clearest for me is this link.

YouTube - energy fluid

around 2.23 - then you can rewatch the whole thing. It should be immediately apparent. I haven't seen the effect on any other videos but nor have have studied them so closely. suchahyo? That may help.

[Adie123]

Adie, check out this link.
PuPP's Theories Forum -> The Hutchison Effect

It's got discussions strongly in support of 'vortices' - and sundry that I am certain conform to your thesis on centrifugal forces. Very interesting.

The following extract which points to a 'WELL WORN COMPLAINT'.

On September 20th, 1985, Hastings issued an affidavit to the effect that ...
On September 19th, 1985, the motor was operated at 1,000 and 2,000 volts
battery input, with output powers of 50 and 100 watts respectively. Input
power in these tests were 7 and 14 watts yielding efficiencies of
700% and 1,400% respectively...

Searl, Schauberger and Newman, working independently, all discovered
the same thing, vortex motion produced free energy in apparent defiance
of the laws of thermodynamics. The free-energy machines they constructed
are called OVER-UNITY machines because they operated in excess of
100% efficiency.

The experiments of Searl, de Palma, Trombly, Schauberger and
Newman have not been repeated in the university establishments
nor have their claims been taken seriously by professional scientists
on the basis that it is impossible to get energy out of nowhere. Free
energy researchers have either been opposed, ignored or labelled
as pseudoscientists and their apparatus dismissed as
'perpetual motion machines'.

Interesting...veeeery interesting

Its pretty much how i see it. Magnetic field and spin cause gravity. Hutchison is claiming the opposit with anti-gravity. Maybe their is a way to reverse my thesis to achieve the Hutchison effect. Ive not looked into that possibility tbh. I'll give it some thought from now on

[Jetijs]

Hi.
Have some news. I took one of my laser cut wheels and magnetized it with 4 coils in parallel. Then I removed the coils and put it on a spinning platform. I spun it up to about 1200RPM. This time several people could see something, it was something like a faint shadow in cone shape coming up the center of the wheel. and all the wheel was enclosed in kinda bubble. I could see something only occasionally, but at least finally there is something there. I think that I need to use the three wheels together and make 8 coils on them, this should make the effect way stronger. Also I think I found the best material to cut these wheels out of. We call it the tool steel, it is the type of steel that many tools are made out of, drill bits for example. This steel retains quite a strong magnetism when a neo magnet magnetizes it. I will see if I can get this material in sheets. This way I will be able to magnetize each segment separately as Harvey suggested and there will indeed be magnetic poles as in Leedskalnin's generator. Here is a picture for sucahyo:

[Adie123]

@Jetijs - wow looks dangerous hehe

Also, remember me saying about eds flywheel and the diagram showing 2 same poles pushing each others magnets away to make a pmh without the lock?... well i just realised that ed leedskalnin had 4 poles together. he didnt have 24 magneto magnets but he had 48 of them. So its gonna be a boosted push of magnets in a 3 dimension and not a 2 dimension like my pictures first implied. There must be a huge growth in magnets flying about at every pole with a setup like that surely. Also i had trouble keeping 3 same poles together when i was doing my magnet to monitor visuals. I did try 4 but gave up cos i couldnt hold them hehe. So the more same poles you place together the force multiplies.

Just thought i'd mention it.

Adie

[Cloxxki]

@Jetijs - wow looks dangerous hehe

Also, remember me saying about eds flywheel and the diagram showing 2 same poles pushing each others magnets away to make a pmh without the lock?... well i just realised that ed leedskalnin had 4 poles together. he didnt have 24 magneto magnets but he had 48 of them. So its gonna be a boosted push of magnets in a 3 dimension and not a 2 dimension like my pictures first implied. There must be a huge growth in magnets flying about at every pole with a setup like that surely. Also i had trouble keeping 3 same poles together when i was doing my magnet to monitor visuals. I did try 4 but gave up cos i couldnt hold them hehe. So the more same poles you place together the force multiplies.

Just thought i'd mention it.

Adie

I don't have Ed's PMH picture handy here, but did he not have a 4-way stacked setup in this 24-V shape? If indeed he got 4 same pole to be pressed, or more practically, locked together, I can see some force getting involved there.
I know too little about magnets. Could imagine designing a press, just to get all the magnets to come together. Perhaps superglue would keep them there then,plus some concrete for good measure?
Something else, in non-energized mode, could we diver the flux away to make the like poles to come together more easily? Perhaps that's a handy function of the 4-clover shape on top. Pure speculation once more, in hopes someone will be tricked into getting a smart spark.

EDIT : in a 4-way stacked V setup, one COULD bring EIGHT like-poles together, right? Seems like a very good reason for flux to jump the air gap... Motion (to take flux out of cosmic equilibrium) might get it go wild.

[Jetijs]

Edd had 5x24 Vpieces so total of 120 pcs.

[Adie123]

Edd had 5x24 Vpieces so total of 120 pcs.

my bad, was looking at someones mockup when i realised he had 2 layers, but 5 layers is even more powerful than i mentioned with 2 layers. wow thats gonna be hard to get them alltogether. Its noticable in the picture that ed had a couple of plates to screw them down like a clamp, but still i wonder how he got them all in like that. These are already magnetised permanent magnets!

Adie

[Cloxxki]

my bad, was looking at someones mockup when i realised he had 2 layers, but 5 layers is even more powerful than i mentioned with 2 layers. wow thats gonna be hard to get them alltogether. Its noticable in the picture that ed had a couple of plates to screw them down like a clamp, but still i wonder how he got them all in like that. These are already magnetised permanent magnets!

Adie

24 rods, each side sliding into thick wooden blocks. On the inside, a tighly fitting log or barrel. Put all 120 V's in place, then put the tightening bolts at work. It's going to take maybe hours to get them all gradually right in place, and end up with what we see.
The hard part would be (then) to know WHY. And for today, those magnets are apparently quite costly now. Plus we don't know the why.

All is so absolutely purposeful, Ed much have figured it all out in Latvia, stored it in his brain, and merely needed the minimum to carry it out. And then only as a means to build the castle he wanted to build, as he problably achieved anti-gravity before even going to the US. Such a remarkable man.
It really seems like our today's minds are less free, or less able to build mental brigdes to extend our ambitions into reality.

[Adie123]

And for today, those magnets are apparently quite costly now.

Your not joking there. Visited a few metalworks today to see if i could get them made amd then magnetise them myself. £250 GBP for 24 was the cheapest offer. Found a place on the net that may have the model T magnetos but it shows that the madneto magnets amount is 16 for use on the car. Im sure it would cost into the thousands to buy 120 of the buggers lol. Ed was a lucky man that he lived in a tax free, scrap free world.



Adie