Originally posted by FuzzyTomCat
View Post
Announcement
Collapse
No announcement yet.
gravity waves found
Collapse
X
-
Originally posted by citfta View Post@ Harvey, In your picture with the green writing you have pointed out several interesting features. Most of them I had not noticed. Thank you. The feature you pointed out as a special fixture welded on at the bottom of the rod cap I believe is not a special feature. It looks just like a normal dipper that was a part of the rod caps of that time. All automotive engines until the early fifties had a dipper on the bottom of the rod cap. This had a small hole in it that went to the crankshaft journal. As the rod rotated it dipped into the oil and oil was forced up through the hole and onto the crankshaft journal to lubricate the bearing surfaces.
I am trying to figure out what the rod could be for. Does anyone know what parts of this machine rotate and what parts remain stationary? I was under the impression from the pictures that the whole thing all rotated together with the crankshaft below it. If so I don't know what the rod dipper would be for. However it seems like the rod dipper is pointed to the V of one of the magnets and maybe it somehow stays stationary while the magnets move past. From what I have read about Ed, I don't think he put the rod in there without having a reason for it. Only more pieces to the puzzle I guess.
Carroll
Here is a close up of the 'Dipper' on another brand of Rod
I was watching this video where Seth was turning Ed's Generator and tried to determine why his muscles got under such a strain as it started slowing and down and the odd sound that was made, perhaps off screen - but possibly in the interconnection between the crankshaft and the wheel? Is that a brake drum that the V magnets are resting on? Could the clover leaf be slotted to go around all the magnets or is it just resting on top? YouTube - Edward Leedskalnin Generator
I think the clover leave was made from an old leaf spring.
You can see the crankshaft turning below in the video, does the timing separate when the sound is introduced?
"Amy Pond, there is something you need to understand, and someday your life may depend on it: I am definitely a madman with a box." ~The Doctor
Comment
-
Originally posted by Harvey View PostThanks for that extra information
Could the clover leaf be slotted to go around all the magnets or is it just resting on top? YouTube - Edward Leedskalnin Generator
I think the clover leave was made from an old leaf spring.
You can see the crankshaft turning below in the video, does the timing separate when the sound is introduced?
This along with the pulley system, would allow one to move heavy objects with precise positioning with ease. Mystery Solved, Case Closed!
GB
Comment
-
Originally posted by gravityblock View PostThe video above clearly shows this is a Harmonic Drive System. In the last few seconds of the video, it is easily seen there are gear teeth on the inside flex spline attached to the wave generator, which will mesh with the circular spline's teeth. Below is a picture taken from the above video showing the wave generator, flex spline, and circular spline for the Harmonic Drive System. Watch the video carefully and you will notice the inner flex spline is meshing with the outer circular spline.
This along with the pulley system, would allow one to move heavy objects with precise positioning with ease. Mystery Solved, Case Closed!
GB
AdieAlways thinking outside the box!
ASUS M4A87TD motherboard
AMD Phenom II x6 Turbo Core 2.8/3.3 Ghz Overclocked to 3.5 Ghz CPU
RIPJAW 4GB 1600Mhz DDR3 Memory
Gforce 9800GT 1GB Graphics
Windows7 64bit OS
20" LG LCD 1680x1050 Monitor
Comment
-
Originally posted by Adie123 View PostNope sorry, im not buying that. The whole thing keeps in sync with one another. The handle keeps inline with the clover/bowl, the bowl keeps inline with the bolts and the plate and the plate keeps inline with the magnets. Its all cemented together, how is this same as the Harmonic Drive System?
Adie
GBLast edited by gravityblock; 07-10-2010, 10:53 PM.
Comment
-
Originally posted by gravityblock View PostYou're in denial. The whole thing does not keep in sync with one another.
GB
Regards
AdieAlways thinking outside the box!
ASUS M4A87TD motherboard
AMD Phenom II x6 Turbo Core 2.8/3.3 Ghz Overclocked to 3.5 Ghz CPU
RIPJAW 4GB 1600Mhz DDR3 Memory
Gforce 9800GT 1GB Graphics
Windows7 64bit OS
20" LG LCD 1680x1050 Monitor
Comment
-
Originally posted by Adie123 View PostNo denial here, i cant see anything that doesnt spin differently from one another. From the crank to the handle and out to the magnets is all one secured piece. Your making your own illusion for yourself :P.. All the best with that.
Regards
Adie
I'm not here to convince you otherwise. I'm here in search of the truth, whatever that truth may be. Don't let yourself be bamboozled and hoodwinked.
GBLast edited by gravityblock; 07-10-2010, 11:40 PM.
Comment
-
Originally posted by gravityblock View PostYou can see the teeth on the flex spline. How can this be one secured piece when there are gear teeth on the inner flex spline, which is clearly shown in the video and image? The system does appear to spin differently from one another, if you take a hard look at it. Condemnation before investigation is folly.
I'm not here to convince you otherwise. I'm here in search of the truth, whatever that truth may be. Don't let yourself be bamboozled and hoodwinked.
GB
:P
Regards
AdieLast edited by Adie123; 07-11-2010, 12:13 AM.Always thinking outside the box!
ASUS M4A87TD motherboard
AMD Phenom II x6 Turbo Core 2.8/3.3 Ghz Overclocked to 3.5 Ghz CPU
RIPJAW 4GB 1600Mhz DDR3 Memory
Gforce 9800GT 1GB Graphics
Windows7 64bit OS
20" LG LCD 1680x1050 Monitor
Comment
-
Originally posted by Adie123 View Postok look, ive looked at it hard, but what your missing is theres cement all over it, look in the center. you can see the back of the magnets sticking through the cement and the cement is caked all the way upto the clover rose bowl. The cement is also all the way through to the outside of the flywheel inbetween the magnets. and above the magnets between the plate. tell me how all that cement is allowing a piece of the workings to spin independantly from the rest of the flywheel???
:P
Regards
Adie
GB
Comment
-
Davids Elements
Now this looks a lot like Davids Open End Elements:
YouTube - Nikola Tesla Levitation
I wonder if there is any Lambright Glow in the video that some of us just can't see"Amy Pond, there is something you need to understand, and someday your life may depend on it: I am definitely a madman with a box." ~The Doctor
Comment
-
Originally posted by Adie123 View PostNope sorry, im not buying that. The whole thing keeps in sync with one another. The handle keeps inline with the clover/bowl, the bowl keeps inline with the bolts and the plate and the plate keeps inline with the magnets. Its all cemented together, how is this same as the Harmonic Drive System?
AdieLast edited by witsend; 07-12-2010, 06:06 PM.
Comment
-
Originally posted by gravityblock View Postif you take a hard look at it. Condemnation before investigation is folly.
I'm not here to convince you otherwise. I'm here in search of the truth, whatever that truth may be. Don't let yourself be bamboozled and hoodwinked.
GB
Comment
-
Originally posted by Cloxxki View PostYou'll need a coffee of cola to keep up for 9:08 minutes. It's gets relevant to this discussion halfway through.
YouTube - Antigravity Physics Explained (NEW!) From AlienScientist!
Comment
-
Have gone over that video - AlienScientist in great depth. He's brushing over an awfully large number of steps to get to that conclusion - 'high frequency electromagnetic energy in - gravitational propulsion out.' Golly. If only. Also a bit strange about releasing gravity from the nucleus of the atom. Not sure what he means. Actually I'm intrigued. Very articulately presented. I think he's trying to inspire students to replicate Dr Podkletnov's? experiment. No harm there. But not at all sure about the logic to get to antigravity.
I personally have no reason to doubt the 'Hutchinson Effect' - and he does NOT seem to rely on the speed of rotation which is central to this argument. But a really interesting viewing and I've now gone over a whole lot of his videos. He's definitely a free energy enthusiast. Brilliant guy.Last edited by witsend; 07-12-2010, 06:04 PM.
Comment
Comment