Announcement

**david lambright** · 08-26-2010, 09:37 AM

cat...

Originally posted by CatLady View Post

Hello David and all...
I saw Bruce online at OU.com again today for a couple of hours. Its just frustrating that he finally made contact then asked for Matts address and then no response once again. I hope this never happens to you again David when you send out a rig to a forum member.

Cat

did harvey ever make that oxide core device?....what do you think about the OU thread?.....goodstuff.....TODAY IS THE DAY OF DISCOVERY!

**Jetijs** · 08-26-2010, 09:52 AM

Thanks David!
I can't wait to get the ring

In the mean time I have found out that you can get those ford model T magnets for about 100$ a set. There are 16 pieces in a set. But if you want only the cores that are not magnetized, they will cost you just 30$ a set. Unfortunately shipping of those cores to my country costs 3x as much as the cores themselves. I need at least 2 sets for one complete 24 pole ring for my tests. I will get them grinded to precise shape so that there is a great touching area, this is important according to the channeling info. And then I will put them on a rotating wheel and lock them. Of course I will have to magnetize them first. So far I have not found any suitable material here from which I could cut out the V shapes, because the needed steel grades are obtainable only in un hardened form. And the hardening process though which the cores gain their magnetic abilities is quite tricky, you need to cool the parts quick, but a bit too quick and cracks will appear. So the cores from the FordT is so far the cheapest way for me.

**CatLady** · 08-26-2010, 07:17 PM

Originally posted by david lambright View Post

did harvey ever make that oxide core device?....what do you think about the OU thread?.....goodstuff.....TODAY IS THE DAY OF DISCOVERY!

Hi David, I'm not sure what Harvey is up to with the oxide core just yet. I will have to ask him.

Better days are ahead and we will try and stay focused on the positive. I'm hoping you can have Glen film your rig and lets get some more comments. I do believe some progress is being made on your thread.

Cat

**Harvey** · 08-26-2010, 08:02 PM

Originally posted by david lambright View Post

did harvey ever make that oxide core device?....what do you think about the OU thread?.....goodstuff.....TODAY IS THE DAY OF DISCOVERY!

Hi David,

I did poke around in my plumbing box the other day and the only aluminum I found had holes in it - like a sprinkler but it was bigger holes farther apart. I do have the same aluminum tubing you used but it is still in use on my hot water heater. I should replace that with some flex someday when I get some ambition.

I don't have any oxide - But I should have that DV stuff I wrote about earlier - I looked for it just now and it has been moved from where I had it stored - I hope it wasn't tossed out

the mag roller in that DV unit is a special type of field shaper that pushes the magnetic field into a unidirectional brush and I don't want to lose that assembly.

On the upside, I did find a section of 1.25" galvanized fencing pipe 15" long that I can possibly get 24, 1" high elements from to reproduce your rig.

(I had it as a pipe wrench leverage extension with my plumbing tools). Wouldn't be the first time I sacrificed a 'tool' in the name of science

.

My problem is time and ambition. I think the only thing that keeps driving me on this is that I want to see the effect that you guys are seeing. Has anyone done any resonant cavity calcs to see what frequencies these elements would tune in for?

**Bob Smith** · 08-27-2010, 02:21 AM

David,
I've been following at OU, and only have time this evg to read this last page here at EF. What struck me from the beginning is that your rig seems to be a microcosm of the earth. Could it be that the earth spinning is just one big magnetized Leedskalnin wheel? Maybe someone's already said that - if so, my apologies.

Will try to read what I've missed - don't relish all this ketching up, but I'll do what I can mustard to get up to speed - little night time humour from a tired hot dog

Looking forward to seeing more developments in your work and from other interested researchers.

Just a thought - I had meant to say this earlier. I found a Youtube vid a couple of years ago of a magnet spinning on the end of a drill bit emitting a surreal greenish glow. Couldn't find it, but it reminded me of what you're doing. I've often thought of doing the same with a small Neo using a Dremel, and getting it up to 10,000+ RPM.

Now that I'm on a roll...
In addition, you've got John Searle's flying saucer which seems to employ your find using what in relative terms might be an early (preceding) variant on your configuration. Could it be that two of your units spinning in opposite directions over one another might nullify gravity? Might we get the same if we were to spin 2 neos facing one another at the end of 2 dremels in opposite directions?

Anyway, FWIW.
All the best to you and the gang here.
Bob

**Bob Smith** · 08-27-2010, 01:19 PM

Again, for what it's worth...
Gerry Vassilatos describes light being produced by the ground itself around Nathan Stubblefield's home, through his work. Could it be that he stumbled on and found a way to more fully access the light phenomenon seen in David's apparatus, produced by the earth's magnetism?
I think this is the link:
Earth Energy and Vocal Radio - Nathan Stubblefield
The light phenomena are more towards the end, I believe (been a while since I read it).
Regards,
Bob

**gigo** · 08-27-2010, 06:50 PM

Hey Bob, is this the video with the spinning magnets with the greenish glow around them?

YouTube - Antigravity Energy

**Bob Smith** · 08-27-2010, 06:58 PM

Hi Gigo,
That's the one. Thanks for finding it.
Bob

**Tishatang** · 08-27-2010, 09:29 PM

@Bob Smith and all

I believe the light from the ground is an orgone generator.
Look up Wilhelm Reich (?) spelling.

There is chapter from the same book LOST SCIENCE you linked.
Go to my thread here about my ideas of NS.

http://www.energeticforum.com/renewa...-new-post.html

For everyone's info, I have a copy of the original printing of LOST SCIENCE, if anyone is interested in buying it?

I will soon be 74 and I am devoting the rest of my life to my new bride from
China.

Good luck to anyone on this forum to make the world a better place.
tishatang

**david lambright** · 08-28-2010, 05:51 PM

hi jet...

hey, there are some very interested people at OU that were wondering if you or perhaps me could post some of your pix and stuff over there or maybe you might start posting over there also?....you have done so much for me and this thread jet, thank you again....i dont know if you can track the package but i have the receipt and will post the info if you want....i cant wait....i want you to see this!....maybe even more than you do!!!.....david

**Jetijs** · 08-28-2010, 06:21 PM

Sure David!
My picture hosting server broke down, pictures are there but the links don't work anymore, I will repost the pictures here and in OU.com

Thank you!
Jetijs

**Harvey** · 08-28-2010, 06:23 PM

Originally posted by David Lambright

was the formby image animated?

As far as I can tell, a video was made of a still picture and the apparent motion is probably from the video compression algorithms.

A couple of days ago I was taking a short break and just let my eyes relax - sort of staring off into space so to speak at some drapes hanging over our bay window. I have a swag lamp hanging in the corner with a fluorescent 'Greenlite' bulb in it. Below the lamp is a computer tower. It was a hot day and we had the AC off to save money and do our share on cutting down on energy over-consumption. But as I sat there glaring at the top edge of the drapes I could see a strange waviness - but I had to keep my eyes perfectly still and out of focus to see it and it was only visible around the edges of my focus point. There seemed to be some color transitions in the waves which seemed to sway back and forth in a rising motion. The waves themselves would have covered about 3" peak to peak and were not in a straight line and were not at all synchronized with each other.

I recall commenting to my wife that the heat in that corner combined with the fluorescent light seemed to be causing a "Lambright Effect" - she was sitting under the lamp at the computer. So I assumed that her thermal energy was adding to the visualization.

Admittedly, my eyes were quite tired and strained at the time - so I do not know if if the effect was in the air there by her, or a perception in my peripheral vision.

I hope to have time today to cut the pipe

**Jetijs** · 08-28-2010, 06:48 PM

**argonian1** · 08-28-2010, 08:32 PM

Originally posted by david lambright View Post

this wave is what heat and all EM spectra travel on. if 2 candles are placed 180 degrees apart on a disc, the flames point towards the center of axis, away from the artificial gravity created by spinning.

are you serious with this? lol

imagine a plexi glass tube filled with air and a balloon, which is free to move inside the tube. the balloon is filled with helium and the glass tube is turned very fast around its own axis. the balloon will obviously turn inwards towards the center of rotation and not outwards, because helium is lighter than air and the centrifugal force pulls the heavier molecules outwards.

same stuff is going on with candle flames. they are lighter than air (candles' flames burn away from earth (center of gravity)) and when spun the flames turn towards the center.
gravity waves, seriously?

**Harvey** · 08-29-2010, 02:57 AM

I am pleased to say that with my Dad's help I got more done than just cutting the pieces.

Zoom
Two cut so far

Zoom
Ready To Deburr

Zoom
Ready to Halve

Zoom
Ready to Bend

Zoom
Assembled

Compass Test Failure:
YouTube - Lambright -001

A Little Time Vortex Humor:
YouTube - Lambright - 002

I'm very happy to have an assembled rig that I can experiment with

EDIT: Sorry about the missing audio on those two vids - I thought it was still processing, but there is clearly an issue with the audio track not uploading - will have to sort that out.

EDIT: Audio Fixed - Please note these are new links

Announcement

gravity waves found

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment