my smith kanapadz replication

[vrand]

HI Peoples,
I have read that thread but you watch videos for understand how many turns have coils, for obtain capacitor value, etc... with the object of copy only.

In fact for me Tesla concept is simple.. him have in mind an best project, transmit electric energy via ether, after few expriments have found that not only is possible but have obtained also more energy power

All inventors like Smith, Gray etc. have interpeter right tesla results creating an energy transmitter/receiver and for antenna they have used COILS.
For that if you want that system work YOU must have the same resonance (wavelenght) when you use high frequency HV supply.
Smith have specified that HV frequency must be > 20KHz because you need WAVES.

Simple example.. Every antenna have an resonance frequency.. if you use wifi unit to 2.4GHz you can't use antenna at 433MHz for transmit signal.. you need right antenna!!
The same principle is apply to that.

Regards from Italy

Hi Alex,
What is claimed by the kanapadz design is Output > Input to over 800% and scalable to over 100kW working devices. What is happening now are several researchers have succeeded in reproducing the device. More reproductions is needed so people can make there own power to save money instead of buying gasoline and high price electricity.

There is something special happening with the coil design that makes this extra energy. The wire going into the center of the coil is the common theme to all of these devices.

Here is a schematic from Callanan:

callanan
Full Member

Posts: 176


Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #1895 on: Today at 06:33:28 AM »
Quote
Hi All,

It appears that this is the circuit JLN & romerouk are using based on what I can see from their videos and the information they have provided.

- I do not know of any Tesla device that has that wire loop in the center of the air coil.
- I do not know of any Tesla device that have been reproduced by more than one person in the last 120 years that show extra energy output to power a house.

Not one has succeeded in reproducing the EV Gray, Coler, Markovitch, SwissML, or the 100's of other "Free Energy" inventors.

This Kanapadz FE circuit is unique in that someone other than the original inventor has succeeded in reproducing it.

Regards, Mike R.

[tutanka]

Hi Alex,
What is claimed by the kanapadz design is Output > Input to over 800% and scalable to over 100kW working devices. What is happening now are several researchers have succeeded in reproducing the device. More reproductions is needed so people can make there own power to save money instead of buying gasoline and high price electricity.

There is something special happening with the coil design that makes this extra energy. The wire going into the center of the coil is the common theme to all of these devices.

Here is a schematic from Callanan:





- I do not know of any Tesla device that has that wire loop in the center of the air coil.
- I do not know of any Tesla device that have been reproduced by more than one person in the last 120 years that show extra energy output to power a house.

Not one has succeeded in reproducing the EV Gray, Coler, Markovitch, SwissML, or the 100's of other "Free Energy" inventors.

This Kanapadz FE circuit is unique in that someone other than the original inventor has succeeded in reproducing it.

Regards, Mike R.

HI Mike,
The answer is simple.. There are some ways or reach results.
Smith mentioned that earth ground and air electons are used.
However for me Kanapazde use the high frequency circuit/coils for excited earth electrons, for that copper wire, connected to earth ground, is positioned inside coils..
In all case you need right coils antennas and right HV circuit.
You wrote: The wire going into the center of the coil is the common theme to all of these devices.

Smith don't use that method.. ground isn't positioned inside PVC AIR CORE tube, probably because Smith use advanced electronic HV supply.. I think the high frequency HV is very important component for reach success on these devices.

[cosmo-lv]

HI Mike,
The answer is simple.. There are some ways or reach results.
Smith mentioned that earth ground and air electons are used.
However for me Kanapazde use the high frequency circuit/coils for excited earth electrons, for that copper wire, connected to earth ground, is positioned inside coils..
In all case you need right coils antennas and right HV circuit.
You wrote: The wire going into the center of the coil is the common theme to all of these devices.

Smith don't use that method.. ground isn't positioned inside PVC AIR CORE tube.

Only want to say, that coil is wrong

[tutanka]

Only want to say, that coil is wrong

Sorry don't have understand what you ask.. you refer to Smith coil? explain me better..
Im pretty sure that secret of Donald Lee Smith is only HV high frequency and coils antennas .. probably appear same Meyer effect used inside wfc.. electrons are stressed , in Meyer case that method produce gas from normal water without electrolyte instead in Smith system produce an extra amount of energy.. in fact Smith ,using TESLA concepts, in fact have created an ENERGY AMPLIFIER.

[Mark]

Only want to say, that coil is wrong

Cosmo

How do you know the coil is wrong, have you built it? What is the correct way to build the coil. If you don't know why are you posting!

[EMCSQ]

Only want to say, that coil is wrong

If you want to give us a hint, and probably are afraid of talking to clearly just post an url.
This kind of coil is not kapanadze's invention, isn't it?
So there are similar ones in the net?
There's an earth constant related with this?
I.E. when lightning strikes, big waves of low frequency are sent around the world. The waves the steven marks tpu is working with?
The resonance occurs on atomic level?

[Xenomorph]

Cosmo

How do you know the coil is wrong, have you built it? What is the correct way to build the coil. If you don't know why are you posting!

Maybe it´s fun to play the teacher and talk in riddles ?
Especially if he doesn´t trust anyone anymore

Sorry if I'm saying something wrong, I'm not so good in English writing.

Anyway don`t understand me wrong I'm not here to teach! and i don't want to quarrel with someone.
i experiment 3 years with different types of Tesla coil setups - most of all is standard, but in last couple moths i find some thing was newer discovered anywhere and i not make it - all what i can say, experiment with windings.

And yes it is bifilar coil but in not standard way!
---
And good bye - i'm not trust you here anymore! Thanks...!

[cosmo-lv]

If you want to give us a hint, and probably are afraid of talking to clearly just post an url.
This kind of coil is not kapanadze's invention, isn't it?
So there are similar ones in the net?
There's an earth constant related with this?
I.E. when lightning strikes, big waves of low frequency are sent around the world. The waves the steven marks tpu is working with?
The resonance occurs on atomic level?

No one coil in net are related to Kapanadze.
Don Smit coil nothing to do with free energy.
There are not atomic componets not even radioactivity, exotic wires - etc...

70% - 90% of construction can be seen on 100Kw Kapanadze unit. But it is, as i see 3 phase unit.

YouTube - Kapanadze 100 KW free energy unit test in Turkey

There are Two main components in all unit.
i dont cnow how work Steeven Mark TPU. 99% is the same tehnique - i only guess... i don`t try jet make it on Toroids...

[cosmo-lv]

Maybe it´s fun to play the teacher and talk in riddles ?
Especially if he doesn´t trust anyone anymore

it`s not fun for me...
if your EGO saying this then you can think that way, but - No.

you see, i work on free energy project almost 3 years i spend lot of hard and wery hard work.

i Only hope - someone else can do this and i bee happy to see it.

i also delete from my YouTube chanel D. L. Smith videos - to not confuse somebody with wrong information.

someday i make wideo of my device, but not now:
this is my chanel: YouTube - cosmolv's Channel

[EMCSQ]

I think the replicators Naudin and Romerouk provide more details than this video.

O.K. sparks (Bearden says Energy from the vacuum)
Don Smith uses no spark gap? (Or arcing bow)
A continuous signal is not able to gain energy from the ambient.
Is there any hidden capacitor which dominates with the inductance and results in a LC circuit. Which resonance frequency should it have , the 50 or 60 hz the frequency of the mains.
Is it (because of this frequencies) simple a energy thief?
If the coil is the energy collector, the different thicknesses of the coils have only to do with impedance matching.
The coils could be would in a less complex manner, and it will also function ?
The wire in the middle of the coil has evt. no function?
Does he all that complex stuff to prevent revealing a simple functioning principle?

The way for me to go:
The 2 different coils upon the long one ; I will build them with different winding directions, so I can easily remove them from the big coil .

[Xenomorph]

I think the replicators Naudin and Romerouk provide more details than this video.

O.K. sparks (Bearden says Energy from the vacuum)
Don Smith uses no spark gap? (Or arcing bow)

He does.

A continuous signal is not able to gain energy from the ambient.

It is. Depends on how your definition of a continuous signal looks like.

Is there any hidden capacitor which dominates with the inductance and results in a LC circuit. Which resonance frequency should it have , the 50 or 60 hz the frequency of the mains.

Every coil has a parasitic capacitance. Smith uses caps together with his coils.

Is it (because of this frequencies) simple a energy thief?

No it is not, it can be prooven by running at a total odd frequency to that.
Power company disinfo.

If the coil is the energy collector, the different thicknesses of the coils have only to do with impedance matching.

Impedance matching is less important than the thickness aiding a higher current.

The coils could be would in a less complex manner, and it will also function ?

Hundreds of people failed with easier windings.

The wire in the middle of the coil has evt. no function?
Does he all that complex stuff to prevent revealing a simple functioning principle?

Who can say that? Seems that it does. It´s good that you wanna experiment with it, you will find out if it is.

[Armagdn03]

Here is an interesting video I made a while back, but never made it public, because it is misleading.... it does not show the setup in its entirety.

YouTube - Inductive / capacitive transformer

Basically what is shown is a a half wave resonant coil (red) driven so that it has two electrical poles at each end. Inside the tube at each pole is a capacitive element (mass of conductive material) which is connected with a diode in between.

each conductive mass is then attached to the neon, essentially what you have is a coil, with a wire running through its center, oriented through two virtual electrical poles created by the resonant coil.

So if you follow the circuit attached to the neon, it will be one leg of neon, goes to conductive mass inside red coil, to diode, to second mass, to next leg of neon. The resonating red coil "pumps" the neon capacitively, and it gets hot.

I make no claims as to its performance,
This may or may not pertain to the subject here, just meant to spark some ideas.

[vrand]

HI Mike,
The answer is simple.. There are some ways or reach results.
Smith mentioned that earth ground and air electons are used.
However for me Kanapazde use the high frequency circuit/coils for excited earth electrons, for that copper wire, connected to earth ground, is positioned inside coils..
In all case you need right coils antennas and right HV circuit.
You wrote: The wire going into the center of the coil is the common theme to all of these devices.

Smith don't use that method.. ground isn't positioned inside PVC AIR CORE tube, probably because Smith use advanced electronic HV supply.. I think the high frequency HV is very important component for reach success on these devices.

Hi Alex,
In order to reproduce an invention the researcher needs the EXACT specifications. There are ten to hundreds of design variables, that if one is missing, the experiment can fail.

That is what Kanapazde researchers are looking for so we can recreate the invention.

First comes the experiment, then comes the theories. For example, Newton needed an Apple to hit his head before his theories.

These forums are ways to spread the news and show "how to" instructions so other researchers can build and verify the invention.

Regards, Mike R.

[juju]

my replication

here is my transformer, input 220V output 2150V 1385VA!



my cap is this one:



ALL: my question, can i use this cap? because all the guys are using caps with KV range... maybe your transformers are more powerfull?

EDIT: the transformer goes to ground to? im starting my coil can i use 1mm cable for the 6 turns coil? and for the other ones what is more appropriate? i have network cable of 0.5mm...

[cosmo-lv]

No need for powerfull transformers! this one from Microwafe only distubs magnetic fields - you get no F.Energy from this. how you can then control the coil? No way.. then you need to make super duper big coil

1385VA is way too mutch -and this one works in 50 Hz No way to get free energy device.

you need frequency something around 21 - 35 kHz with smal simple HV transformer with 3000v - 6000v