my smith kanapadz replication

[boguslaw]

May I ask important question for me maybe a bit offtopic (but maybe not) ?
Let's assume that we would have Don Smith circuit working but the output is high frequency but also too high voltage. Can we still charge capacitors using some clever ideas ? Resistor divider ? Transil diode across capacitor ?
Any ideas ?

[Joit]

I am not sure about that. I dont even know, what the output looks like, if it is 8000v or 220, divided through L1. But mainly the Caps there collect the HV and convert it to pulses, what show up in the Coils. At L2 the Caps are, to support the Power continously, it does not mean, the Power is allways in, just at this Certain Point. So not sure if it works to place resistors and supress the HV. But he still has some other nice Devices like this Tpu-like Coil at the smith.pdf above.

[masster]

I have watched recently (again) the video lecture that Donald Smith gave in 1996 at a Tesla Symposium (YouTube - Donald L. Smith 1996 Tesla Symposium Part 1) and let me tell you a little story about it:

From my understanding, he succeeded the best in replicating what Tesla meant by high-voltage, high-frequency machines (although Smith never admitted he knew about Tesla works - hmm...). Almost 15 years went by from that lecture and a few of his statements made with that occasion are still ringing in my head:

- "the car industry is dead and they don't even know it"
- "in one year there will be only electric cars"
- "I don't deal for peanuts, I only talk with presidents, emperors, sheiks, etc"
- "the entry ticket is from $500 million up to 1,000 times more"
- "the suitcase I have there is not for sale and if you think getting closer to it, you might not be able to leave this room"

At one time, a young man asked: "do you believe Tesla would think more about money ?" and Smith answered "I do this to have enough capital and to be sure that nobody will suppress MY invention" but then the young man asked "but why don't you share IN FULL your knowledge on the Internet ? this way 'they' won't be able to shut down anything" and again Smith answered "go look on the Internet, the plans are already there and consider this presentation as a gift to you", and I could continue with more bitter-aggressive remarks from Smith...

So what have I learned from this (sadly true) story ?

When greed for money and power are greater than inventor's moral, he is doomed to bite the dust and live the consequences of not sharing his knowledge with mankind. I must stress it, disclosure IN FULL, because wherever you search, you find only scarce half truth made in the name of a secrecy that will bankrupt the owner again and again.

I hope to live the day (I'm only 47) when some brilliant guy will have an ego to match the greatness of a solid state free energy device invention, because otherwise we will be forever slaves for an army of Rothschilds and other good ol' boys with an oil well in their backyard...

It is not all about how many turns has that coil or how many Farads that capacitor... it is about the moral fabric you got. You may be a mighty eagle or you may become a poor old man born in Texas whose hands are trembling from Parkinson (Don Smith Free Energy - Video), that hardly finds his words and who gave a lecture back in '96 at a Tesla Symposium and never worked for peanuts...

It's up to you.

[nafanja]

Hello

It's a Russian looking for the Kapagen and Don Smith

As I am understand we may three coils
One is generate the Voltage and Secondary the Curent and the Third the summ of this fields.

[Joit]

Hi.
I would may call it like that, as you do.
But i think it is still a Matter of the Moment from the Peak of a Wave too.

[tianboon]

I don't know what I am seeing

Hi Joit,
Finaly I got the chance to rewire that coil and tested before the bridge rectifier, some interesting result but first I would like to pick your brain for a second again, did Don Smith mention on L1 suppose to be wound CCW? and L2 CW and on the other half of L2 CCW?, I recall that he mentioned when L2 are wind CW first half and CCW second half this will generate the current needed?

I put an amp meter(digital) at the output of the center tap to Earth ground and read between 10 to 18 amps?what am I reading here? is this the true amp? and I noticed by inserting L1 in and out L2 the current changes but when I used an analog meter I did not see anything, the range of my analog is from 0.06 ma to 300ma dc and also when I put a 12V car light bulb nothing.
The voltage I am reading is about 200kv fluctuating, my power supply is 18v dc about 2 amps, this fluctuation, is this because the SG doesn't have a solid plasma stream?, when I watch SR193 and JLNaudin's video they have this nice solid plasma stream on their SG.

You mentioned you were able to get a light bulb lit on, on a similar experiment?, I think I got it right wired the way recommended by Don Smith's method, the L2 is wired on a 3 inch pvc and L1 is wired on 2 inch pvc and when I slide L1 in and out there is some changes in the current.

I haven't connect my inverter yet, any suggestions?

[boguslaw]

Good.Point me to the video Don Smith said about L2 coil winding.Very good spotted. Think about it

[Guruji]

Schematic

Can anyone translate those schematics please?
Thanks.

[Joit]

Hi tianboon
Not that i really do know of, that he said CW or CCW. I would have trust at you, when you say you did read it. Right now i stopped a bit working on it, because i dont have the right Capacitors, to low, with the Glass, they dont wanna work as i want them.

From L2 i know it is a Air Coil, what he did wound off 4 turns in the middle, so basically, it should be a complete Coil, only cuttted in the middle and unwound 2? turns on each side.

He still mentioned, when you excite a Coil at the one (left) side, you will get more Current, and the other Side more Voltage, and in the Middle an average Value.

I got high Amps readings also, over 10Ah, but i did not know if my Meter is crazy, and thats why i connected the bulb, what did light at a certain Point, when i move L1 in. But L2 was more Winding on winding, no space between the Wire.
But i did it, because it will tell you the truth, if it will burn through or just glim, when you connect it as Load on the generating Coil.
But the Current there was really fluctuating, thats why i hope i can solve the Capacitor Problem. I would prefer a couple adjustable ~2µF 4000V. But seems its to hard to find.

[tianboon]

Thanks Joit,
My L1 and L2 coils were wound with spacing and he mentioned this, he said it will be very effective, and I think he is right, in comparison with my first coil.

Can you telll me the differences between analog dc amp meter and a digital VOM meter?, I put accros with an analog dc amp meter for a car battery which has a range up to 60 amps and I did not even see any deflection of the needle and likewise with an analog amp meter with 0.06 ma up to 300ma range and no deflection at all and yet with my digital VOM with a range of 10 Amp I could see it went up to 18 amps and also when the leads were disconnected the meter still pick up and gave me some amperage reading, my point is do I realy reading the current amperage of the system? my meter was switched either dc or ac and it make no different in reading the amp.

[boguslaw]

So called Don Smith "tabletop device" is a crap. Mark my words.IMHO you should analyse deeply Smith documents with relation to his words from presentation and then make changes into presented device. Sadly enough most of free energy devices are modified to disallow replications (and modifications are done not always by inventors!). I failed on replicating every one.

[boguslaw]

"My L1 and L2 coils were wound with spacing and he mentioned this, he said it will be very effective, and I think he is right, in comparison with my first coil."

What we should know about spacing ? Think how Smith would cover original idea when talking about spacing and pointing to the crap device ?

[Joit]

boguslaw,
Ever seen this tiny Coils in a Radio? They can be used to tune it to the Frequency by drag them apart or make them smaller.
At this Coils the Magnetic Field shall play a big Role also, they you build up a proper one, what creates the Energy.

[Joit]

tianboon
you should use for your Inverter a Reostath in case you use it. It is mainly to tune L1 with the Source.
For my SG i used 2 Screws opposite with 2 Nuts connected with Iron Wires to a clambing bar.
That way i could turn the Nuts against eachother and adjust the SG. The Fluctuation can come from the SG, but, i did get a short after a while in one from my Transformers with the jumping Spark inside.
I wound now something by my own what looks more solid, but maybe your HV transformer is a bit to weak for a good SG.
But you may can try to connect an other Transformer, to see if it can make a better Spark, then your first one is maybe damaged.
My input was about 8V, 0,6Ah with a Mosfet. A Mosfet gives me a better Spark then a NPN.
A Difference at a Analog and Digital Multimeter is, that the Mesurements goes over Resistors to the Needle, at DMM's are more Components there, what can be influenced.
But i still got on my Analog meter Spikes with 10 AH also. Just my Bulb (later 2) said, no, that dont works.

[tianboon]

Thanks Joit, I think you might be right that my HV flyback is not that good eventhou it seems to give a good spark with an 18V power supply, because I was watching a youtube video and this guy used a similar set up as I do using Flyback and one single power transistor to drive his FB and he got a nice stream of plasma at his SG and also he was referring to JL Naudin wiring diagram that the SG ought to face the negative side of the capacitor, at which he had problem at the beginning, his SG was facing the other way, but then I assume those oiled filled capacitor is not polarize, how do you determine which side is pos. and which is neg.

I will get back to you again after I replaced my FB transformer with a new one, either that I have to buy a NST.