Kapagen Theories, Replications, Winding Diagrams, Circuits & Schematics. KAPAGEN ONLY

[timh651]

This device sounds interesting

Ok listen, I have a basic understanding of electricity. From what I've scanned through I understand that this device was initially designed to produce 220 volts at 50 Hz. I'm living in the USA and all of my devices run on 120v 60Hz. So what I'm wondering is, can some one point me in the right direction for a diagram or a step by step video on how to build one of these devices that can put out about 5000 watts of power at 120v 60Hz? I would like to replicate this.

[TanTric]

Ok listen, I have a basic understanding of electricity. From what I've scanned through I understand that this device was initially designed to produce 220 volts at 50 Hz. I'm living in the USA and all of my devices run on 120v 60Hz. So what I'm wondering is, can some one point me in the right direction for a diagram or a step by step video on how to build one of these devices that can put out about 5000 watts of power at 120v 60Hz? I would like to replicate this.

hello tim, sory to dissapoint, but this device dont put out extra energy, that was allready proved by the creator, JLNaudin!!

hugs

[baroutologos]

Ok listen, I have a basic understanding of electricity. From what I've scanned through I understand that this device was initially designed to produce 220 volts at 50 Hz. I'm living in the USA and all of my devices run on 120v 60Hz. So what I'm wondering is, can some one point me in the right direction for a diagram or a step by step video on how to build one of these devices that can put out about 5000 watts of power at 120v 60Hz? I would like to replicate this.

You can search the whole Internet. There is not any definite proof that such device actually exists. Let alone to replicate one step-by-step.
All these forums is about reviewing old and new energy concepts, theorizing, experimenting, story telling and dreaming.

We are just not there yet. If we ever be.

[Core]

Familiar sound

I guess that s the beauty of Tariel Kapanadze device. Nobody has been able to replicate it.

On a different note. In Tariel's video when his device starts it make's a familiar sound. This is the same sound a 230/460 volt, 2 H.P., single phase electric motor makes when the run capacitor is defective and its rotor locked.

Here is the video, at about 1 minute in he starts the device.

YouTube - 5KW free energy бестопливный генератор Kapanadze Капанадзе

Respectfully,

Core

[Chip Shorter]

I used a slightly different setup from my EV Gray experiments. I am coming to the same conclusion. My next experiment is to wind an additional coil right before the front end goes down to ground. Im starting with a 700 turn steel core single wind placed in series with the first ground. Then I might do the same to the load ground then both. I will post back if I find something.

[tarassio]

here is translation to english

[mr_madness]

"Miracle generator" an interview with Mr Tariel Kapanadze

Here is a nice interview with Tariel Kapanadze (translated with Google)


A new hero in the 21 st century alternative energy, former architect who does not have great knowledge in electronics and electrical engineering (judging by his devaysu), but still creates a generator "freebie." What's his secret? Maybe the fact that he was aware of everything myself, and did not follow the laws of physics, which are described in textbooks? We can only guess ... to suggest it to your attention the interview, I hope for further discussion of his generator.

Interviews entire cosmos is the potential field, said Tariel Kapanadze, I found the key, how can I get the energy, the energy is here, near us in space, just need to open it, and that would take this energy, you need a boost. Recently gave a 9 volt battery powered, and after some time the device started working, then it gives power to itself, in operation, I was able to achieve up to 150 kilowatts of power, but can complicate this process and take more energy!

- This box?
- Yes. Here is the concentration of energy that I get from the space.

- You can tell this energy we get from the air?
- It efirodinamichesky process. At the time, Einstein denied the existence of ether, and later scientists were forced to make its existence in space and in physics, a new direction - Etherodynamics. The process of obtaining energy from space, one of the principal in Etherodynamics.

- So the space, spark, and a secret method, and you can get alternative energy. Yes?
- The high precision I can not say anything, it's a trade secret, and many confrontations with me, tried to steal the idea already.

- Who is interested in this?
- Here (in Georgia), I was unable to interest anyone and went to Turkey and there has patented its own generator, then the Turks, I signed the contract, were to make a 10 megawatt power plant began operation, and at that time seemed certain Mindeli, says, "I also know about this secret ... A lot of money and nerve it took to fight it. I returned to Georgia and Mindeli sits in Turkey and thinks like the space to get energy. Turks were again in contact with me, but I do not want to look there.

- In addition to the Turks no longer interested in your invention?
- Yes, of course, the recent interest in European and Western experts, recently I made my version of the transportation system, a presentation was held at the Patriarchal TV on it was 3.4 experts from Europe, who made sure that the machine now. In the Patriarch of All Georgia have the desire, whatever that invention remained in Georgia, I also like that Georgia would make a good profit, but by the government attention to zero.

- If your invention will be implemented, what are the consequences?
- The first function will lose Telasi (Energocom): The main principle is this - you take as much energy as you want, everyone will be able to install this unit in an apartment or in the entryway. The only thing you need is the wiring and quality parts.

- The government is not interested, you say?
- 2003, Mikhail Saakashvili and Zurab Zhvania came to my house, the entire area cut off from electricity, which would test the effectiveness of my invention, I have a TV and a light bulb turned on. The second day began Ajarian news, but today no one interested ...

- Mr Tariel, and by profession a physicist you?
- Physics I only taught in school. By profession I am an architect, on the road the Lord led me, when asked how the idea was born, I say that it's not mine, and Nikola Tesla was a Serbian scientist who in America has lived and worked.

- What say about plans for budushee?
- Recently, the employee of the company "VESTEL" he said, give one copy of appliances: washing machine, refrigerator, air conditioner, and others, and soon will return so that the plug is not required. Can a similar technique to establish within their own power supply, which will make it work and work. So what future plans do not depend on me. A few days later going to meet with the Patriarch, my desire - the idea is here to stay, but from abroad also have a suggestion, if there is no one interested, I will work with road, sea, rail, air travel, I want to create a lab, now Century Knowledge and information if anyone can win, then it is the mind and the mind God gave us, we'll see what will happen in the future.



---------------------

Source:
Тариэл Капанадзе и его "Чудо генератор"

---------------------

[Jiffycoil]

My Replication

Being the kind of person who has to see for himself I decided to try and replicate the Kapagen device. I'm combing what I have learned form years of building Tesla coils and the hind site from the experiences all of you who have had building the Kapagen and am giving it a try.


Kapagen replication 1 by jiffycoil, on Flickr


Kapagen replication 2 by jiffycoil, on Flickr


Kapagen replication 3 by jiffycoil, on Flickr

I look forward to testing this coil and seeing what it can and cannot do. I will firstly as I do with everything I build have fun building and running it.

[kooler]

@jiffycoil

man, i hope it performs as good as it looks..

nice job on the perfect turns on the copper tubing..

robbie

[Jiffycoil]

Wow! Thanks Kooler I truly appreciate your complement. I will need to get a few things for testing a Lux meter, and a "killawatt" or similar so I can be kinda accurate. I worked on the spark gap this evening and am looking for a carbon electrode. I did set it up tonight just to test the build . I used tungsten electrodes on the gap and lit 2-120w halogen flood lights. The out put was too bright to look at but that really means nothing but that the coil will work for experimenting.

[Jiffycoil]

Coming along

I finished building the stand for the coil all except clear coating. I'm trying to get a feel for how I would like the components to be laid out. Next I need to build a light assembly for testing and then wire them both up.


Kapagen layout by jiffycoil, on Flickr

[ismael_34]

hello friends

Could I suggest at

gas discharge tube that I can use for a halogen lamp 1000w

thanks

[luishan]

Nice set up

To : Jiffycoil

It looks very nice set up.
Would show us detail spec information.
May I see circuit diagram and capacitor values, number of coil turns, diode value ....
Thank you very much for sharing your work.
I wish your experiment succeed.

[Jiffycoil]

@luishan
I'm following Jean-Louis Naudin's design. You can find the spec's on his web site. I am making a few changes that I learned making Tesla coils. I will test this unit very soon and if it works I will post the full specs for all to use. At this point only partially through with the build I don't feel confident with posting specs for a unit untested yet.

[Jiffycoil]

All wired

I finished wiring my Kapagen tonight. I used high voltage wire from the MOT to the capacitor and High current wire on the rest of the connections. I kept all connections as short as possible. I wonder how many people who built one of these used a 1Meg Ohm resistor across the capacitor? The way many designs read it looks as though you need one there as a bleed resistor. Just a note to future builders Microwave Oven Capacitors MOC's has an internal bleed resistor that bleed off charge in about 15-20 seconds. I wanted to test the build so I hooked it up to my shop ground and hooked up one 100w bulb.

At 50 volts


Kapagen test by jiffycoil, on Flickr

At 100 volts


Kapagen test 2 by jiffycoil, on Flickr

Looks like normal output for the voltage at this point though it is running single wire. Next I build the light board and sink some ground plates.