Kapagen Theories, Replications, Winding Diagrams, Circuits & Schematics. KAPAGEN ONLY

[BroMikey]

Wesley/Akula/Slider/Laserhacker

Wesley has compared Akula and Kapgen coils and Slider is saying Akula based coils are SJR Looper type by Lasersaber AKA laserhacker who is giving away all of his secrets.

https://www.youtube.com/watch?v=8dq9NQhzdw0

Hacker is going to be rich. He will get some money for his gifts. He is a minister of free energy secrets.

Laserhacker stated early on in his ministerial quest to spearhead extra energy circuits, that he started out with learning John Bedini's stuff and first built a SSSG or that is a (Solid) (State) (School) (Girl) circuit oscillator.

And that is the basis of his entry into his work over in the JOULE RINGER creations.

Wise man, no cock sure attitude and very humble man. Someone with a few bucks will reward this man and help with his new flashlight circuit.

Lasersaber is a poor boy like the rest of us compared to industrial based manufacturing enterprise.

https://www.youtube.com/watch?v=Zt5zulKQ1XE



https://www.youtube.com/watch?v=Op-6lBRgIdY

The simple addition to the system that is compared to the Kapagen is a coil that recycles power over and over again.

Do a search on SJR Looper and see for yourselves.


https://www.google.com/search?q=super+joule+ringer+looper&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-USfficial&client=firefox-beta&channel=np&source=hp#channel=np&q=super+joule +ringer+looper&rls=org.mozilla:en-USfficial&tbm=vid



Mike

[BroMikey]

Kapagen Coils

Kapagen Coils and recirculation windings

https://www.youtube.com/watch?v=nDP1XuUUZf8





ReGen coil.

Mike

[BroMikey]

KapaGen

Here are a few lost pictures of success stories















http://192.211.49.220/-%20Free%20Ene...-2possible.jpg


Index of /- Free Energy/Akula/

Mike

[sprocket]

BroMikey, thanks for the links. According to Wesley's translation of the Akula Lantern, available here, it is claimed to run perpetually, and not just till the capacitor has discharged - like LaserSabre's circuit does. My question, do you know of anyone else that has got it to work? It looks dead-simple to build. I've just been rummaging around looking for a suitable ferrite core but came up empty.

[BroMikey]

Overunity transformers

Greetings Sprocket

You want a suggestion? You won't have so much trouble finding a core after this.Do a search on OVERUNITY TRANSFORMER in the Video's.

Not just Lasersaber comes up, the whole world is running these variations of transformers that produce many times the input power.

Free energy is here. Youtube is impartial. Enjoy

Mike

[tachyoncatcher]

Magic Coil

Hello guys, Thanks to Wesley and Mike for gathering this info in one convenient place. I am particularly interested in the Daly/Ruslan variant. Stability has always been the bugaboo when it comes to these type of devices and I like what Ruslan has worked out. With that said, is there any sources for what he did with his coil? the Dylan dissection of his coil shows no iron pipe core. Ruslan's coil seems to have two formers but I could not tell if there is any iron in that one. Does anyone have the types and size of wire used? I have found a variety of core sizes from 50 to 90mm on the web. I would like to duplicate Ruslan's version as close as what information I can get. Yes, I know I can tune for whatever size I end up with, but I am starting with the Ruslan circuitry, so would like to keep things to his replications dimensions. Thanks in advance for any push I can get in the right direction.

Randy

[BroMikey]

30-40 awg

Hello guys, Thanks to Wesley and Mike for gathering this info in one convenient place. I am particularly interested in the Daly/Ruslan variant. Stability has always been the bugaboo when it comes to these type of devices and I like what Ruslan has worked out. With that said, is there any sources for what he did with his coil? the Dylan dissection of his coil shows no iron pipe core. Ruslan's coil seems to have two formers but I could not tell if there is any iron in that one. Does anyone have the types and size of wire used? I have found a variety of core sizes from 50 to 90mm on the web. I would like to duplicate Ruslan's version as close as what information I can get. Yes, I know I can tune for whatever size I end up with, but I am starting with the Ruslan circuitry, so would like to keep things to his replications dimensions. Thanks in advance for any push I can get in the right direction.

Randy

If I remember right Wesly said he used 40awg but the other guys used 30awg or something like that but THAT didn't matter because like with mine no matter how much I put in the output the input goes down.

Well let me re-state what I did. I went to the desk and grabbed some 1" ferrite beads and just filled them each with one layer and the the reverse winding.

I didn't do a in-dept computation, just a fun try. I am up to over a 100 LEDS and the input does not change. I am running at 4-5 vdc @ 150ma.

The LEDS are not bright and never change in intensity regardless how many more I add. The LEDS are lith to a brightness that I see when I hook one to a wire in the yard but glowing a tiny bit brighter.

It is a radiant glow. I can do the same thing with LASERSABERS older joule rings in fact I took the same battery and for the same power got about the same light so it is hard to say whats going on.

The old joule ringers don't wind wire in reverse and the input goes up with more loading at some point.

The new looper may.

My test was just for fun, then I looked at the slider video and he gives the number of turns, something like 160+160=260 and I don't remember anything else right now.

https://www.youtube.com/watch?v=3g5_x1TQsPA

I didn't do all of that. Slider tells you what he found. Checkem Out!!

https://www.youtube.com/watch?v=cUVvZzeDe5U

Mike

[BroMikey]

Secret

Kapagen Secret

http://realstrannik.com/media/kunena.../kapanadze.jpg

[BroMikey]

Kapaman on the loose again, just can't seem to kill all of the dreamers. The Zeal of life is eating this guy up.

https://www.youtube.com/watch?v=Y6hiMkN0Zms

[telemachus]

Your Kapagen video on youtube looks impressive. Could you share your schematic? Thanks.

My Kapagen:

Kapagen - YouTube

[LAIRDANDY]

A usefull component

To those who are trying to replicate, I have been studying the kapanadze, akula, ruslan, daly etc devices from wesleys videos and on the forums but not posted much in any of the forums. I am currently designing a circuit with variable frequency and a nano pulser using an AD5932, as this chip has frequency scan and can be programed from almost any cheap pic mcu which can be found in old washing machines microwaves etc and the ad5932 is not very expensive from analog digital but there is also another chip they do AD9106 which has four DACs that can output precise pre programed phase shifts and also each dac can be programed to output different wave form. I thought this information may be usefull to those who are trying to replicate. I am sticking to the AD5932 for now but the program to control it will be my biggest hurdle as i need to make it sweep desired frequencies then with an input of the pic monitoring the amplitude on the output coil have it lock in at resonance. If there are any good pic programmers out there that could help me on programing side my email is andy@mklaptoprepair.com and hope this helps some of you!

[LAIRDANDY]

futher to above

If anyone is interested in how I am using the AD5932 here is a snippet from multisim, it can't be simulated because the components dont have working model data for multisim, just footprint. The power mosfets and some aditional circuitry are on another board/circuit. The 74as04's are actually the higher speed 74ac04's but multisim does not have them listed. Another chip that may prove more usefull for nano pulser other than the max977 comparator is the DS1023 from dallas semiconductor (maxim) as it can output pulses as small as 5 nano seconds and is also programable but by holding pins high or low so no more pic code for that one. I am going with comparator to start as I can control the duty of nano pulse simply by ajusting the trimmer resitors. I have not included the pic controler for ad5932 as I already have a usb board i made with pic18F4550 which i may use or some other pic to connect via 3 wire spi header.

[LAIRDANDY]

The Mosfet circuit

This is what I came up with for the mosfet circuit. The diodes I will be using are s10c40c, again not listed in multisim, the ones in circuit were close as i could find with suitable footprint. If anyone can help with programing , I am now thinking of using PIC16f726 and i need it to tell the ad5932 to scan between two freqeuncies that can be easily changed in the code at increments also changable in code then when scan is complete locking in on the highest output resonant frequency an if it drops rescaning close the frequency below and above to continueously stay on resonance. I am out of work so have no funds for this project but if it should lead to a device that makes money then the programmer would get part of this. I have done various types of programing in the past but am very slow and not sure of best practices for speed of execution and simplicity on micro controlers. So bit of a on that bit.

[LAIRDANDY]

I have slightly altered the schematic and created the board layout (smaller than 90mm by 40mm!) if anyone wants me to post the new schematic and layout let me know. I should add these chips are very small and the pins very close so you need to be quite good at soldering small chips and the mosfet driver needs a good connection to the expossed pad for heat dissipation.

[BroMikey]

I have slightly altered the schematic and created the board layout (smaller than 90mm by 40mm!) if anyone wants me to post the new schematic and layout let me know. I should add these chips are very small and the pins very close so you need to be quite good at soldering small chips and the mosfet driver needs a good connection to the expossed pad for heat dissipation.

Fancy. I saved your other boards, sure paste it up we will
get after it. Some of these guys are not able to design
circuits so your help is good. One thing we all know is that
the Nano pulses are best for many projects with very few
able to successfully build one.

Remember anything you can give will label you a giver and someone
will out do you in the end. I have found that free gifts are the
way to go.

Have you gotten any good results with it?