Testa Hairpin Flyback Transformer Cold Energy

[TanTric]

so glad you like it shamus!

yeap, i allready seen that! in some frequencys the energy can get the load lamp!

Great video Juju! Did you notice that at certain times in that video that you were causing the filaments in the bulb behind the one you were playing with to glow?

[TanTric]

some things to think about

the system likes voltages arround 12V input... dont go far that 16V because it becomes unstable, the frequency range change with voltage, the radiant effect dies, and then the bars will byte you!

i played with 20V but i forget to power my frequency generator with independent supply and i burned my last timers. will have to wait till monday so i can buy some.

any suggestion from the theory masters to improve this? i still need to triple the voltage so i can power my lifter, any help?

BOOM

[TanTric]

doublers and triplers

here is a naice video explaining voltage doublers and triplers:

YouTube - Lynx Electrical Tutorial on PMAs

very good and well explained!

now i have to figure out watt capacitance values i will need, and the diodes to handle my high voltages...

in my electronic store they dont have voltage triplers like the one in this video:

YouTube - Flyback Transformer connected to Voltage Tripler

so i have to try other ways!

[sucahyo]

Thanks for the info Karl .

i was wondering the name for the vid, and the only one that came to my mind was "sucahyo"... hope you dont mind, i just feel that!

wait till the end, its so beutifull! modulating the frequencys i can get so many types of shapes and effects, awsome!!

. . Really beautiful . Nice that you can capture one. I have one moment where all the electrode lit violet but can not capture it .

Can you post picture of that spark gap bulb at it brightest moment? Or is that the brightest you can get? Maybe your driver circuit need more power.

Try my stingo once you tired replacing 555 .

[TanTric]

...

yeap sucahyo, i played with frequencys and duty cycle in my frequency generator range, and thats what i can get... but my battery was allready becoming flat at the time of that video, so at 12V i think i will get more brightness and maybe see the violete you talk about!

stingo? are you talking about your self oscilator? can you remind me the schematic?

hugs and thank you

Thanks for the info Karl .

. . Really beautiful . Nice that you can capture one. I have one moment where all the electrode lit violet but can not capture it .

Can you post picture of that spark gap bulb at it brightest moment? Or is that the brightest you can get? Maybe your driver circuit need more power.

Try my stingo once you tired replacing 555 .

[sucahyo]

Here is my circuit:


I am expecting glow. Mine at 1 amp input won't produce purple, it toast the spark gap filament instead and glow it (motorcycle turn light bulb):


The other bulb I use (torch light bulb) had the filament fully burned up.

[TanTric]

think you sucahyo, very kind of yours, you made me remind that i have a small lamp like yours arround, so i will try it!

someone of the theory masters can explain us why this kind of hairpin energy is able to light bulbs without no current on the output? why is this config so special? the flyback alone is useless...

[TanTric]

...

i will be making the temperature test that harvey suggested and show the effects of cold energy powering a lifter!

some advices to replicators, if there is some?

@fzzzy, how r you doing? did you got the caps? i think you will be fine with 10kv and 2000 to 4000 pf capacitance, but im just guessing! are you using frequency generator?

froM frequency generator to transistor should use 20 to 100ohm resistance, and is very important the transistor TP41C, with other ones i do get shock...

have to make more tests, but there are some strange effects when changing components, even the timers i got now seem to work different! i recommend NE555!

someone can help to calculate the total capacitance that i have on each side of the capacitor banks?

BOOM

[TanTric]

...

harvey, the bulb dont seem to heat on my thermostat, will try different bulb and make a clip that will be included in my lifter video!

hugs

[fzzzy]

I have been away from my workbench so I haven't been able to do anything, but I might be able to make a hairpin replication later this week. I have been wanting to for a while, but haven't been able to get the parts together.

Thanks for the info about capacitors. I think I am still going to try to find some doorknob caps.

[TanTric]

...

thats the way to go, try different thing and see what happens! (but im not shore, if the caps recommended to the old fashion hairpin circuit, will work with mine, because in standard config, output is 10.000V 23mA, mine have maybe 1miliAmp)

now my input is near 15W and i mached the load with a 15W bulb that will light super bright, just as if it was connected to the grid!

if we think in the energy being lost on the SG with heat, sound waves, etc, and solving that issues we may have a very close to OU device!

would you use the flyback transformer?

@ALL

as no one want to help how to calculate the total capacitance, i made a circuit with my assumptions!! thread updated!



hugs

[TanTric]

hello

hi everyone!!

its proven, there's no heat on the lamp underwater.. its really cold energy! im working on the video...

any suggestion so i can replace the copper spark gap, for one with same efficiency or more but that will not waste energy with noise? a silent one!

hugs

[sucahyo]

any suggestion so i can replace the copper spark gap, for one with same efficiency or more but that will not waste energy with noise? a silent one!

A broken lamp is not a good spark gap then? Maybe you should create a bigger gap with vaccum tube.

[jeanna]

low noise pulse generator

That is what I have been trying to do with a joule thief as pulse generator.
It is quieter than a spark gap and takes a lot less to do a lot.
I was able to get the same effect as you are

BUT.
My max voltage output is 1800v

I am very impressed with this because I cannot get the unbroken filament bulb to light.
Now, I see maybe I should be using a broken bulb anyway.

I think you should try sucayho's circuit.
I believe it does not rely so much on having a good toroid as the joule thief.

Is that right sucayho?

Nice work juju.
A good experience for a conscious being!

jeanna

[TanTric]

...

yeap, the broken lamp will not let all the energy flow with the same power as copper...

there's nothing that i can buy that can be efficient? i dont have air pump to make vacuum!

hugs

A broken lamp is not a good spark gap then? Maybe you should create a bigger gap with vaccum tube.