Don Smith A review...

[med.3012]

Ok, I have deleted the post. But I don't understand why people don't even ask something.

At the moment I'm observing transformers. I have your device as one to replicate, but after I finish some other circuits.

we are two person now, i have other friends outside the forum trying to get something from this system, the more we understand the mechanic of electrons spin the more power we get .

[mikrovolt]

Forum traffic comes in cycles
and the questions come from trends from popular
scientists of alternative experimental kit companies.
We speak in general terms about their equipments
and show respectful care for the work they are entitled to.

The enthusiast wonder about magnetic fields and the electric fields of coils.

https://www.youtube.com/watch?v=XQzcYZk9MWA
https://www.youtube.com/watch?v=_YFBs7DVqok
https://www.youtube.com/watch?v=n6h5kK8zUog

Shaking the local ambient space is different.
However the JB zero force could be modified
to express elliptical motion.
But I do not recommend taking any claim for JB's work
on zero force that he invested his time with. It is a concern that
his business continue and the conferences and forum
have plenty of enthusiasm this way.

To keep the discussion on Shaking the magnetic background.
taking serious the high voltage low frequency is dangerous to
work with giving electrical shock is a real hazard. Jumping into
the kilocycles in order to prevent accidents.

[med.3012]

high voltage low frequency is dangerous, working with capacitor banks is dangerous also, in the E-TBC based systems we shake the electromagnetic background energy, in the latest test i tried a high voltage diode after the the HV capacitor feed the E-TBC oscillation just to see the source of power i get, the power remain high, this prove the source of power is the oscillation of E-TBC inside a ferrite core, other scenario will be tested soon .

[ilandtan]

Gentlemen,

Please don't be discouraged by the apparent lack of response. I have gleaned much in mental gum about DS devices, and agree that so much has to be tested. You factor in the availability and resources, and you may not see an immediate response even from the most gifted here. I wish we all lived on the same block, and I could sneak over while my wife is not tasking me... and look, talk, and think about this frontier what's been referred to as cold electricity.The E-TBC is very interesting to me, because It shows possibly a way of putting reactive energy in phase to become real current. My mind imagines a different electro/magnetic device that is a cavity resonator that takes plasma in the MHz frequency. What is plasma... just a spark gap in a vacuum in noble gases. What is cavity resonator... a closed 3D media where 1/2 or 1/4 lamda can oscillate to make a standing wave. What if I have a plasma in the center of an E-TBC? I am thinking I will build a crude E-TBC with a variable frequency adjust and just sweep it until I see the most magnetic output? If you place a plasma at the center of coil and pulse it in phase with the frequency, would you not be adding to the magnetic component of a wave? I know that a discharge of an air coil is most concentrated at the center of the air core coil. It is the heart of the torus, the place where most the magnetic output is generated from my EV Gray experiments. I know I am not close to building to test these theories, and maybe we just need to establish culpable excess energy. But I am eternally optimistic. Thank you guys for contributing so much, your knowledge begets new thoughts.

Here is a recent claimed E-TBC success:

https://www.youtube.com/watch?v=UC29rHxx6Es

[med.3012]

hello everyone,


the video is nice, i agree still further work is needed, it's normal to meet some disappointing times since we are separated along the globe, the guy in the video was missing something vital and without it the E-TBC can't give the intended power! this is why i pointed him in you-tube to energetic forum for serious work ! he say it work without proving anything real, for example lighting a 100W bulb, in my point of view this kill this device rather than giving something important to people.

i worked continuously for two years to give the idea of E-TBC to people but i felt something is wrong in my presentation even though the main idea is still correct and i am following it, unfortunately most people don't know the importance of these device or what's the real meaning of the present of zero point energy around us ?

some great inventors say i don't want to take these info with me to grave, others choose another way even though they have a reason but finally we still don't have these devices!

without real testers who have the willing to build and develop it's not worth to share info, even though i will continue to communicate no problem at all, later i will try to discuss your idea !

regards

[ilandtan]

Besides you developing your E-TBC with an iron core, and the video creator placing the spark gap at the "X" and then having a center tapped receiver coil, what was missing here med? I see how cool an E-TBC is, it is a coil and a capacitor at the same time, so it actually induces hot electricity as well as generating cold electricity at twice the voltage upon the frequency cycle of the wave. (Did I say that right?). I am still trying to understand it so please help me. I am willing to travel down this road, but I want to qualify the project and it's anticipated yield. I mean who wouldn't want to replicate enough power for their home for free?

[med.3012]

Besides you developing your E-TBC with an iron core, and the video creator placing the spark gap at the "X" and then having a center tapped receiver coil, what was missing here med? I see how cool an E-TBC is, it is a coil and a capacitor at the same time, so it actually induces hot electricity as well as generating cold electricity at twice the voltage upon the frequency cycle of the wave. (Did I say that right?). I am still trying to understand it so please help me. I am willing to travel down this road, but I want to qualify the project and it's anticipated yield. I mean who wouldn't want to replicate enough power for their home for free?

ok, we will discuss later, beside this please read my thread again ! it's late here ! good night .

[ilandtan]

I hope you continue to contribute here med, you sound like a man who has something you need to share with others who can understand what you have done. I want to understand, and I read the mo.pdf on my tablet almost everyday trying to relate. What I like is that there are some fabrication steps there rather than just big ideas. I think that's where DS had similar challenges, and problem with a Forum format. Let me elaborate.

If this was an organized project, I would expect specific schematics, parts lists, and fabrication steps. None of us really give that, because we are are all poking at the fire. You would need a successful device with support as above, (schematics, parts lists, fab steps) and we all might be able to build it. DS said very few where able to build his devices that he knew of, and I see why. It is so very important to have the details, and he could not support all the iterations that people do to get from point A to point B. An incorrect spec value of Diode may skew results.

If you have some fabrication steps on your iron core E-TBC and how to wire it, I would try to build it, because the theory of it's operation is convincing.

[med.3012]

@ilandtan


no problem at all, i just need an extra time to make a good video explain some working principles, for example the role of point X or the mysterious junction, the spark gap there will just break electrons spin separation mechanism, this mechanism look like a quantum spark gap where the electrons meet each other and than separated... at the moment of separation both spin can be achieved so we could achieve real active power! DS say it useful radiant energy, it's radiant energy with huge voltage and it has a great magnetic component( current )

in other words the junction X is more powerful than spark-gap, i am still thinking about other behavior and any found information will be shared with happiness.


EDIT : to be clear you need to close the junction CD no spark gap is needed there, this will maintain the electrons spin mechanism, but the resonance will be affected so we need a way to help the electrons spin resonance ( if the words is correct ), ferromagnetic ( not iron core since it's resonance is very low ) core will do a great job, now if we success in lowering the voltage and increasing the current using a kind of high frequency step down transformer we could go further in power increasing paths, for example charging a 12V capacitors bank and trying to made an autonomic inverter ( 500W for example )

[med.3012]

in fact a lots of parameters have to be studied carefully, starting from the oscillation of L1, we have to think about the high voltage module, the optimal geometry of L1, the more voltage obtained in L2 the more power we have but it's difficult to manage, so we need a way to convert the high voltage. high frequency step down transformer was suggested for this application in other publication but we need a practical implementation, as proposed here we need a specific building step by step.

finally using the capacitor in an inverter have to be studied, in other words a lots of skills is needed !

[daan@graceauto.co.za]

Continue sharing research

Hi BroMickey, Med.3012, AetherScientist, Ilandtan and all the spectators.

I am Daan, from South Africa, I am one of the many spectators sitting in the peanut gallery, observing the research being done. I am 65 and started studying electricity/ electronics last year. In our country we do not have reliable powergrids as a result of poor planning and maintenance. This motivated me to start studying in search of finding a solution to power my own house.
I want to urge you to continue sharing your research, I am sure it is of as much value to others as it is to me. While much of it is still way over my understanding I am slowly catching up and your enthusiasm is encouraging me to continue.
I do believe there are many others following this thread and learning, while there will be those who only follow it to see what they can copy into their concepts. I want to challenge the silent spectators to come out of the shadows and share what you are doing/experimenting with. You may think that you will look silly with whatever you are doing but by sharing you will elicit positive response which most likely will teach and aid you, and who knows it is perhaps what you consider a simple(silly) idea, that jolts the next person's thinking into finding a solution!
If you are not building/experimenting currently why not take one of the various suggestions already shared in this thread and build and share, it is the only real way to learn!

[med.3012]

Hi BroMickey, Med.3012, AetherScientist, Ilandtan and all the spectators.

I am Daan, from South Africa, I am one of the many spectators sitting in the peanut gallery, observing the research being done. I am 65 and started studying electricity/ electronics last year. In our country we do not have reliable powergrids as a result of poor planning and maintenance. This motivated me to start studying in search of finding a solution to power my own house.
I want to urge you to continue sharing your research, I am sure it is of as much value to others as it is to me. While much of it is still way over my understanding I am slowly catching up and your enthusiasm is encouraging me to continue.
I do believe there are many others following this thread and learning, while there will be those who only follow it to see what they can copy into their concepts. I want to challenge the silent spectators to come out of the shadows and share what you are doing/experimenting with. You may think that you will look silly with whatever you are doing but by sharing you will elicit positive response which most likely will teach and aid you, and who knows it is perhaps what you consider a simple(silly) idea, that jolts the next person's thinking into finding a solution!
If you are not building/experimenting currently why not take one of the various suggestions already shared in this thread and build and share, it is the only real way to learn!

thanks so much for your contribution,as you said the only way to learn is to build, the hands in the paste will make bread, for sure there's people only follow it to see what they can copy into their concepts, the only way to fight them is to share more ...

i am also trying to urge other experienced members to start building and experimenting but as you may notice other projects are running here also, the objective of this work is much valuable than having free energy at home, even the word free is a mistake because it's not free we already have this power around us we only don't know how to catch it ... !

more info will be provided very soon with God willing especially about building the E-TBC on a ferrite core, later i will try to make the mixed E-TBC on a ferrite core since it show a more powerful result ( in air core ) so we could understand what's going on .

welcome !

[med.3012]

some practical aspects :

the following photo show two separated aluminum foils, aluminum is available and relatively cheap, the ribbon used here are off the shelf:



the second image show the used tools :



to be continued ...

[med.3012]

at this moment i am using a connectors to connect the conducting wires with foils, it's the best way since they are available and secure a stable connection ...



the first step is to make a small hole in the foils :



connect one side of this connector, prepare your wire for this contact as follow :



to be continued ...

[med.3012]

now it's the time to put the cap of this connector as follow:



it's the time to make some effort !




to be continued ...