Charge conserving Capacitive Spring.

[Web000x]

After taking a hiatus from my energy work for a while, I am back with a vengeance...

I will be continuing my work along the line of thought primarily contained within this thread.

My first order of business is work on a special passive transformer using Satruable reactor, or mag amp concepts. The first iteration of this will be based on the following schematic and concept.




This is a saturable reactor used as a frequency doubler. I will be adding onto this, and feeding the outputs into a third mag amp setup. The result will be...An input of 1 frequency, will result in an output of 2 frequencies, one the double of the other. These will feed the control and power winding of a second magnetic amplifier to create a parametric power conversion in the second stage. In other words, I will begin my experimentation with passive magnetic networks which create their own conditions for evaluation of parametric properties. From here I will explore, looping systems to see how many doubling i can fit into such a device before the core will "not handle anymore" and start to fall outside the reasonable BH curve zone.

Accoding to one source I found...

So done correctly efficiencies could be pretty decent.

I will also be receiving rare copies of two books for study. I will only be loaning them, and so I will try to make copies and supply them to whomever is interested.

Analysis of a non-linear circuit for the generation of third harmonic power / by Glenn Lewis Purdy.

The saturable reactor as a harmonic power generator / by Ruben Arther Imm.


I hope there is still interest in this topic!
Andrew

Oh, there is definitely still interest in this topic. I have done many experiments into trying to use parametric variation to see some evidence of Energy Synthesis. Although, my efforts have not proved to be fruitful as of yet, Garrettm4 seems to have accomplished a synchronous parameter variation and has seen energy synthesis effects. He has removed many of his posts so I can't be sure exactly what his claims are. He seems to think that trying to store energy in a falling inductance (falling permeability) is not ideal. I agree with him on this one. I am in the midst of working with a microcontroller to be able to saturate the core of the magamp with the control winding while charging the power windings then de-energizing the control winding so that the power winding sees a rising inductance (rising permeability) just before discharge. Nonlinearities of the solid state circuitry being used makes it a lot less straight forward than the sine waves that I was using in my initial experiments.

The one interesting thing that I have noticed in parameter variation using a magamp is that although the power windings are magnetically opposed so that the induced EMF is a net zero, the loaded power windings do cause a proportional increase in energy consumption by the control winding. This seems to vindicate what Chris Carson says in the SBARC Ham Radio video about the energy in transformer windings being conveyed by dielectric lines of force, or an Admittance.

Good Luck

Dave

[Armagdn03]

I was given a gift today by my buddy good ol John Michael Nunnerley. Many of you may remember his STEAP circuit from several years ago.

http://www.energeticforum.com/renewa...tion-pump.html

It was a self contained parametric oscillator which ran pretty much indefinitely.

Since he is very limited on time lately, he offered to give me his 2013 version of the device which is a vast improvement. I have the schematics, and general description of the simple setup. It involves two Tesla style pancake coils, one atop the other.

According to MJN, the circuit is able to produce 40 watts continuous power with zero drain to the supply batteries, over an extended test period that would have easily drained the batteries in a conventional setup.

Another VERY competent researcher who shall go unnamed was able to do use the same concept to light 110v bulbs and achieve 2.5 COP.

Stay tuned! I will post what I have when I am able to do a bit of research on the topic.

[gyula]

Well, I have been staying tuned.

Gyula

[SilverToGold]

Yeap, staying in tune - looking forward to seeing your post.

[shylo]

OU Prize

Hi Armagdn, Would that not qualify for the prize money?
shylo

[Armagdn03]

I could care less about prize money. I have learned the hard way. What I accomplish I will accomplish by my own hand, and should someone offer and provide assistance so be it, God bless them. But I will not rely on, seek, or wish for any such thing. I have several very interesting projects in the works which would not fall under the "free energy"category, rather the "interesting use of knowledge I have gathered for practical purpose" category. Hope to blow a few minds.

[Gestalt]

Heya Andrew and David,

I am actively working on the MagAmp. My intent is to go with the Alexanderson style 4-legged, since I have adequate metglas to pull it off. Garrett has another 4-toroid design (that I admittedly don't completely understand) which he thinks is worth a shot as well.

I have been posting my progress updates on Raui's new forum here: Gestalt's MagAmp experiment - Alternative Energy - GarageHacker Forums

Love to have both your inputs. I got some really nice B-H curves a few days ago. Once I interpret them, I'll start designing the control circuit.

[kapierenundkopieren]

Hello Armagdn03!
It's been almost a month, so I'm a bit curious about what is going on. Will the schematics and general description of the device be shared in the nearby future? I'm sure many (myself included) would like to replicate it.
I'm writing this post just because I don't like to see gems like this one fade away and I think that the sooner it will be shared the sooner the replications will start.
Anyhow, I wish you the best.
Kind regards!

I was given a gift today by my buddy good ol John Michael Nunnerley. Many of you may remember his STEAP circuit from several years ago.

http://www.energeticforum.com/renewa...tion-pump.html

It was a self contained parametric oscillator which ran pretty much indefinitely.

Since he is very limited on time lately, he offered to give me his 2013 version of the device which is a vast improvement. I have the schematics, and general description of the simple setup. It involves two Tesla style pancake coils, one atop the other.

According to MJN, the circuit is able to produce 40 watts continuous power with zero drain to the supply batteries, over an extended test period that would have easily drained the batteries in a conventional setup.

Another VERY competent researcher who shall go unnamed was able to do use the same concept to light 110v bulbs and achieve 2.5 COP.

Stay tuned! I will post what I have when I am able to do a bit of research on the topic.

[gotoluc]

I was given a gift today by my buddy good ol John Michael Nunnerley. Many of you may remember his STEAP circuit from several years ago.

http://www.energeticforum.com/renewa...tion-pump.html

It was a self contained parametric oscillator which ran pretty much indefinitely.

Since he is very limited on time lately, he offered to give me his 2013 version of the device which is a vast improvement. I have the schematics, and general description of the simple setup. It involves two Tesla style pancake coils, one atop the other.

According to MJN, the circuit is able to produce 40 watts continuous power with zero drain to the supply batteries, over an extended test period that would have easily drained the batteries in a conventional setup.

Another VERY competent researcher who shall go unnamed was able to do use the same concept to light 110v bulbs and achieve 2.5 COP.

Stay tuned! I will post what I have when I am able to do a bit of research on the topic.

Hi Armagdn03,

I did build Michael John Nunnerley STEAP device and was in direct skype contact with him for many hours during his first build and even before he started the topic.

I never got mine to work as he claimed his worked.

So back then I asked if he could send me his circuit so I could confirm his results and to see what I could of not have done correctly but didn't seem to want to do that.

I'm interested to know your results.

Please give us an update, good or not

Thanks

Luc

[Armagdn03]

Hi Armagdn03,

I did build Michael John Nunnerley STEAP device and was in direct skype contact with him for many hours during his first build and even before he started the topic.

I never got mine to work as he claimed his worked.

So back then I asked if he could send me his circuit so I could confirm his results and to see what I could of not have done correctly but didn't seem to want to do that.

I'm interested to know your results.

Please give us an update, good or not

Thanks

Luc

Lets just say the humanistic and social aspect came and disrupted progress. Many issues were encountered, but I do not want to put anybody down, as I do not know the whole story. If you would like to message me personally fell free.

[SuperCaviTationIstic]

Update!

This has been a thorn in my brain for a few years.

I just bought some 6in xenon tubes and started playing with them, powered by a small flyback power supply from an 8in plasma ball.

I hooked up the cathode to ground and touched the hot wire to the trigger wire on the tube. Each time I connected or disconnected the the trigger, my cable remote woud blink. Finally it stopped blinking, and I tried to change the channel but it didnt work, but I found that the mode had changed and I had to push the cable button to put it back in its prior state.

Then I messed around with it some more, and 3 LEDs lit the should never be lit at the same time. I pulled the battery and replaced and the remote no longer works.

This Xenon deionizes way faster than the argon in floro tubes.

More to follow.....

[Armagdn03]

Update!

This has been a thorn in my brain for a few years.

I just bought some 6in xenon tubes and started playing with them, powered by a small flyback power supply from an 8in plasma ball.

I hooked up the cathode to ground and touched the hot wire to the trigger wire on the tube. Each time I connected or disconnected the the trigger, my cable remote woud blink. Finally it stopped blinking, and I tried to change the channel but it didnt work, but I found that the mode had changed and I had to push the cable button to put it back in its prior state.

Then I messed around with it some more, and 3 LEDs lit the should never be lit at the same time. I pulled the battery and replaced and the remote no longer works.

This Xenon deionizes way faster than the argon in floro tubes.

More to follow.....

Awesome. I actually never left this realm of research. It is very fruitful. Look forward to seeing your progress.

There are tubes that can be bought or made also that have "quenching" agents which cause the deionization to occur more quickly. I have also had success playing with "One Atmosphere Uniform Glow Discharge Plasma" or OAUGDP as a means of creating the virtual capacitor plate (the plasma) without needing special tubes in an open air configuration.

Glad to see people still realize how powerful this really is. Happy experimenting!

[SuperCaviTationIstic]

So it seems to me like there are two ways to go with these tubes to produce the effect, but are they the same effect or different?

One method is to charge the tube capacitor, then fire the tube with the highest current density possible to cause electrostatic repulsion of the charges on the grid due to the voltage in the tube going to 0 when it fires and the negative charges in the tube from the current flowing producing a repulsion on the grid charge. A second pulse will follow when the tube deionizes. This method is all DC. I feel this is the method used in Gray's CSET.

The second method is to prevent coupling from the grid to the tube initially by having the tube/grid voltage field under the threshold where the gas will ionize, and the capacitance only forms when the gas in the tube is ionized. Once the 2 terminal capacitor forms, it can be charged, then reverted back to the one terminal cap for the pulse. This is along the lines of Hiddink and Naudin. Naudin claims you can repeat the process without the charging stage to increase energy before discharging to load.

I believe the CSET initially conducts to the grids, but I think it can be done with only a capacitance being charged between the tube and grid, as I intend to do with these xenon tubes.

What is the core comonality between these two methods? Electrostatic repulsion like with Faraday's ice pail and Van De Graaff's generator. It seems to me that cold current is produced by electrons repelling other electrons electrostatically, rather than through a voltage difference attracting electrons.

[SuperCaviTationIstic]

Awesome. I actually never left this realm of research. It is very fruitful. Look forward to seeing your progress.

There are tubes that can be bought or made also that have "quenching" agents which cause the deionization to occur more quickly. I have also had success playing with "One Atmosphere Uniform Glow Discharge Plasma" or OAUGDP as a means of creating the virtual capacitor plate (the plasma) without needing special tubes in an open air configuration.

Glad to see people still realize how powerful this really is. Happy experimenting!

Do you know of a source for better tubes to try with this?

Anything you can share about your OAUGDP work used for this type of system would be awesome.

Basically I have a couple goals. I want a motionless Van De Graaff generator, ala Hiddink. I want to see if Lyne's claims about these types of pulses and their durration associated effects have any truth. I want to experiment with this type of discharge as a means of pulsing current for electrostatic lifters and the like. And lastly, if WW3 breaks out, I can take out the enemy's semiconductors.

[Armagdn03]

Oaugdp

Do you know of a source for better tubes to try with this?

Anything you can share about your OAUGDP work used for this type of system would be awesome.

Basically I have a couple goals. I want a motionless Van De Graaff generator, ala Hiddink. I want to see if Lyne's claims about these types of pulses and their durration associated effects have any truth. I want to experiment with this type of discharge as a means of pulsing current for electrostatic lifters and the like. And lastly, if WW3 breaks out, I can take out the enemy's semiconductors.

Here is some additional information on OAUGDP.

https://www.youtube.com/watch?v=45tCFdRbv7Q

Essentially you are creating a displacement current of high potential within a dielectric barrier. This ionizes the surrounding air (kept at one atmosphere unlike many other plasma devices which require the use of vacuum to create the plasma). This is advantageous in my book because It means I can play with the concept without the use of special tubes and have the whole device take place in ambient conditions. The concept is very similar to the Hidink device. The OAUGDP is created making a virtual capacitor plate. The second capacitor plate is of standard construction (conductive material). A dielectric barrier is placed in-between the two plates. The plasma is turned on, and a high voltage dc generator charges the capacitor. The plasma is now turned off. Obviously this has its own obstacles but its definitely interesting to play with. I have been on hiatus for a while doing various other projects, but this is still the one which interests me the most, as the potential is above and beyond everything else I have read.