Seriously .... has anyone been successful?

[Kevin]

I am not active in this section of the forum...just peek in every now and then.

Sometimes I see a thread like this and chime in. I think the last time was a year or so ago.

Take a look at this thread-

http://www.energeticforum.com/renewa...fun-forum.html

I posted it over 3.5 years ago. At the time I said in about a year I was going to resume my work on a full scale OU device.

I have not done that, other things have consumed my time and interest.

However, I shared back then, and am re-sharing right now, exactly how I produced "free energy" or whatever you want to call it.

Bottom line is that I was able to consistently produce and store more energy than I used to produce it.

The one thing I might now have made as clear as I could have in the post referenced above....it took LOTS of experimentation...I am talking thousands of hours and thousands of pages of notes on what worked and what did not. Even this short explanation falls incredibly short of the amount of time and personal energy I spent fine tuning my devices to get them "OU".

Anyway, it is there in the post above, and I am pretty sure I shared similar info in other posts since then...just do a search in this subforum on my name.

I have other priorities at this time, but I may get back to this project at some point, I just don't know right now.

[cikljamas]

Let me illustrate. If someone gave you a complete set of mechanical drawings for a small lawnmower engine, you might believe you could build one. But let's say they left out two little details simply because they ran out of time when they wrote out the plans. The first detail that is missing is what metals to use to make the parts. The second detail that is missing is the theory of operation. So, without knowing what forces are being harnessed and lacking guidance on specific materials, you might believe you could simply build the whole engine out of aluminum, including cylinders, pistons, rings, valves, valve seats, valve springs, bearings, crankshaft and timing gears. After building the machine to perfection, and when it did not work, because you were also not told to put some oil in the crankcase, you might draw the wrong conclusion that the plans were bogus and the person who gave them to you was a liar.

I can see some logic in this explanation that has foundation in reality but
when we calculate all this words there is much more suspicions that this
words left behind than anything else...

In closing, I would just request that you cultivate civility in your interactions with other sovereign individuals. After all, we owe you nothing. And since you are offering nothing, the least you can be is polite.

Come on man, why you just dont say honestly : pay me, and then we
are going to see if i have enough good will to tell you some little sweet
secrets about something that doesnt exist indeed just like at the end
of this sketch :
YouTube - Monty Python - Argument Clinic

Best regards !

P.S. After all, most of as are really not as clever as this blonde :
YouTube - Stupid Blonde in TV, She is Very Stupid, She Don't

Best regards !

[cikljamas]

Explanation for post above :

We believe you, but isnt it good enough to tell as yours secrets finally,
or we just have to believe you till our last breath and reward is coming
after life in other world....Give as now what you have or say once more:
You have to believe me, i am Peter Lindemann ! Well, if you were Nikola
Tesla we would not have to bag you or anybody else like this at all, you
would give as what you have by yourself, instantly and for free !!!
Do you remember what Tesla did with Westinghouse contract ? Maybe
you dont owe anybody anything, but you owe Tesla everything !

Best regards !

[Aromaz]

There is but one answer: NO! Nobody did.

I'm no skeptic ... I am trying to find someone who will put their success out for everyone to see

I've been making devices and coils and ... trying to replicate as well as I can (I'm no EE) whatever I think I can make. I have also been trying different combinations and variations along the way. . .

There is only one answer: NO, regardles any claims whatsoever and whosoever; NOBODY has achieved usefull overunity, free-energy or any of the likes - Except for Solar, Hydro and Wind charges. Anyway they are not free - cost a lot of equipment investment.

I am an experimenter, I have spend over US$84,000 on this over this past four years - and can prove it with my fully equiped lab and machine shop. I made two commercial devices, but not over-unity, as result of my experiments. A marine and lab instrument inverter was based on an early (2008) circuit of mine and has sold 327 units; 12Vdc to 240Vac sine wave.

I am a sceptic - Electronic circuits are NOT going to do this! Again in other words: The answer for OU is NOT in electronic circuits (at least current elecronic components). Coils - yes I do think they are part of the future, however there I think our methods of winding is wrong - one of my current directions of experiments.

I am an optimist - The answer is in discovering a type of electricity and generation of such by means we do not yet understand fully. The same as people 300 years ago know there was 'electricity' we now know there is this universal energy; but we do not yet know how to tap into it - we con not even define it properly - yet.

I do believe Tesla had this sorted out; but wisely Tesla decided not to reveal this information to the world. Imagine what would have happened in WWII, Iraq, Korea, Vietnam it these super weapons were available!

So where is this energy? All around us and you can keep on looking. I do also believe this will be revealed to humans in the near future.

Besides all; this is the reasons I see why we do not have Pure Energy in use today:
1) We do not understand it yet.
2) We need to go back and re-study, investigate and re-define the origin of matter.
3) THEN from there we should invent all equipment along a new path.

Howcome I am so sure we are on the wrong path? Because of archeology findings and mysterious technologies that the ancients had and we do not. Egypt is the better know - but lessor of value - Puma Punko, China, India and Lebanon. Lately it is as if the world of science is waking up to realise they dont know much.

So, back to research it is - with new positive hopes. Maybe the answer is not in conductors and generators; but in Light. Here is a kick: "Science today does not know a single thin about LIGHT. All they think they know i.e. light=photons, etc. is WRONG" So what is light? What is Photons? Know this first, then I think we will be able to reach out for electricity that does NOT destroy the Dipole.

[cikljamas]

This is authentic sound record (and video) of Teslas last wish,
song that Tesla wished to be performed on his funeral...
performed by Zlatko Baloković, croatian violinist...

That is very sad song, and first words of this song are :

Over there, over there, far away across the sea
There is my village, there is my love...etc...

Just for the record, just to remember that we owe God
everything, and that we are not going to live on this
world forever ! That is why we have to use every second
of our lives to spread love and to help other people...
After all, OU story is story about love or selfishness,
and we dont know how much time is left for us...
So, carpe diem : seize the day, every day could be our
last day !

Here is sad goodbye to greatest scientist of all time,
let us rememeber how great MAN he was indeed !

YouTube - Nikola Tesla Funeral

[elias]

Appreciating those who do share

Hi,

Most of us are not perfect and have an ego that is unforgiving. So instead of accusing each-other, it might be better to appreciate the works each-other. Life on planet Earth is not meant to be forever.

Recently, a really cooperative member of overunity.com passed away (Otto): Sad Breaking News! Otto has died.

He has contributed a lot, and he was a real open source engineer. Apparently he contributed mostly to replicate Steven Marks' TPU:
http://www.zpenergy.com/downloads/otto_TPU-V1_0.pdf

Regards
Elias

[lamare]

I am a sceptic - Electronic circuits are NOT going to do this! Again in other words: The answer for OU is NOT in electronic circuits (at least current elecronic components). Coils - yes I do think they are part of the future, however there I think our methods of winding is wrong - one of my current directions of experiments.

I am an optimist - The answer is in discovering a type of electricity and generation of such by means we do not yet understand fully. The same as people 300 years ago know there was 'electricity' we now know there is this universal energy; but we do not yet know how to tap into it - we con not even define it properly - yet.

I do believe Tesla had this sorted out; but wisely Tesla decided not to reveal this information to the world. Imagine what would have happened in WWII, Iraq, Korea, Vietnam it these super weapons were available!

So where is this energy? All around us and you can keep on looking. I do also believe this will be revealed to humans in the near future.

Besides all; this is the reasons I see why we do not have Pure Energy in use today:
1) We do not understand it yet.
2) We need to go back and re-study, investigate and re-define the origin of matter.
3) THEN from there we should invent all equipment along a new path.

I'm afraid I have to disagree on this. Edwin Gray, Stanley Meyer and Dr. Andrija Puharich all achieved working systems and all three tapped electric energy out of the ether or whatever you want to call it, using resonating coils and some trickery.

While I am not at a point I have something working myself, I am working on the theory how to do this: Article:Free Electric Energy in Theory and Practice - PESWiki

I am sure I have found the basic principles Gray, Meyer and Puharich used and that with this knowledge it is possible to engineer working systems along the same working principles.

However, it does take time to work out all the details and correct the errors that are still in my article, but we will get there. I mean, three independent inventions of which two have been shown to work in public that were all using the same basic principle in some variation is enough evidence to me that it can be made to work and that electronic circuits can and will deliver free energy in the near future.

[Farmhand]

Lightning

YouTube - Slow Motion Video of a Multiple Tower Upward Lightning Flash on 6/16/10

I believe lightning is a manifestation of the energy we seek, and I believe that The Master of Lightning himself Nicola Tesla knew that even harvesting some of the energy from the lightning strikes themselves was a significant source.

The energy that makes lightning possible should not be too difficult to harness but funnily enough I think we will need some kind of circuit to do it and it will have coils capacitors and regular componants along with custom built componants.

Now we all know that tesla already did it, but I am no electrical engineer, everyday I understand more and more, and my investigations all lead me to believe that it is not that difficult just mysterious for now.

I urge that people watch the video and draw inspiration from the way the awsome energy release triggers streamers that seem to flash out of the atmosphere to the more lateral arcs.

Cheers

[Farmhand]

Here's another interesting one notice towards the end there is a lateral bolt that is definately related to the main bolt to the lightning rod.

YouTube - Chicago lightning strike

Now I realise it would be counter productive to try to harness the main strike but what of all the released energy bounding around the area just after ?

It's very interesting and only leads my to have to do a lot more reading.

Somehow I think it would be very difficult to kill that dipole.

[lamare]

I believe lightning is a manifestation of the energy we seek, and I believe that The Master of Lightning himself Nicola Tesla knew that even harvesting some of the energy from the lightning strikes themselves was a significant source.

The energy that makes lightning possible should not be too difficult to harness but funnily enough I think we will need some kind of circuit to do it and it will have coils capacitors and regular componants along with custom built componants.

Now we all know that tesla already did it, but I am no electrical engineer, everyday I understand more and more, and my investigations all lead me to believe that it is not that difficult just mysterious for now.

I am an Electrical Engineer and after my investigations I came to the conclusion that there is one major issue main stream science has overlooked and/or ignored an that is that the electric field itself is an energy source, because it is a dynamic force and not a static one, as Tesla already said in 1892:

"Experiments with Alternate Currents of High Potential and High Frequency"

Ere many generations pass, our machinery will be driven by a power obtainable at any point of the universe. This idea is not novel. Men have been led to it long ago by instinct or reason; it has been expressed in many ways, and in many places, in the history of old and new. We find it in the delightful myth of Antheus, who derives power from the earth; we find it among the subtle speculations of one of your splendid mathematicians and in many hints and statements of thinkers of the present time. Throughout space there is energy. Is this energy static or kinetic! If static our hopes are in vain; if kinetic — and this we know it is, for certain — then it is a mere question of time when men will succeed in attaching their machinery to the very wheelwork of nature.

The electric field is not static, it travels at the speed of light, because otherwise you would have instantaneous action-reaction at a distance. And that's why there is energy in this field and Prof. Turtur calculated this very nicely and straightforward.

So, it turns out that indeed this energy is not too difficult to harnass. Gray, Meyer and Puharich did it and they all used the same principle, as I describe in my article. I have no doubt that these principles can be applied in various ways, even though there are still some details that have to be worked out here and there. At the moment I am working with the LTSpice simulator in order to design a practical solid state circuit along the principles of Gray, Meyer and Puharich, by combining this with other designs such as Dr. Stifflers exciter circuit. I already have a reasonable model for that circuit:

http://www.tuks.nl/Spice/StifflerSlayer.asc
Article:Free Electric Energy in Theory and Practice - PESWiki

Next step will be to add a modulator to this oscillator circuit, along the lines Puharich did:

Once we have that, I want to use this circuit to steer two identical transformers into resonance, using a feedback circuit, also as Puharich did:

Note that this schematic is just a very rough sketch of the idea. The oscillator as drawn here won't work and the coupling from the oscillator towards the transformer across the diodes is not correct, because the way it is drawn now the diodes shortcut the transformers...

[Farmhand]

Lamare I am in awe of your insightfull work and I do my best to try to understand as much as I can. I was looking at the first drawing in your post and I am surprised to see a persons head in a circuit drawing. Is item 64 in figure 2 a persons head ? Wow what on earth is that circuit for ? I'll try to find out by reading the info you linked.

Cheers

[cikljamas]

Farmhand, until we dont find out how to implement Lamares draws
what do you think about Sucahyos stingo circuits implementation
in bedini motors, dc motors, battery chargers etc...?

Lamare, your ideas are very interesting, could you make closer
to as your ideas in a way that we try to do it in practice, i mean
could you give as specific instructions, detailed plans of how to
make it ???

Best regards !

[seth]

Hi everyone,

For a long time now I've been looking for a power source ... I just want to know if anyone has been successful in achieving OU or energy conversion whatever you want to call it.

So ?

If someone has been successful then speak now or forever hold your piece

I was successful today!!! For the first time ever i can honestly say i've replicated a free energy machine, and it works.

Good news - all you need is

1 bright LED
2 IN4148 diodes
a ground rod and wire
your own body.

make an AV plug by joining each leg of the LED to a diode - the diodes must face opposite directions. Join the 2 remaining free ends of the diodes together, and now join this to a piece of wire going to the ground rod. Now, touch one leg of the LED (being careful not to touch any other part of the AV plug, or the ground wire if uninsulated) and it lights up!!!!!!

Free energy, until you die, or the earth does - who needs more

Joking aside, this really surprised me today, and anyone who is sick of things which dont work should try this - takes 5 mins.

All credit to Brokenman for showing me how to do it on his vid.

[Farmhand]

Hi cikljamas, Yes I see Sucaho's Stingo as a very usefull circuit I have several idea's I would like to try to use it with, time management is a problem for me, I don't have the time to do all i would like. I am going to build it soon though it appears to be very durable and has many uses so i think it deserves my full attention when I do it.

I want to build it on a board so that I can easily make the changes back and forth to and from different applications. I think it could be used in combination with other systems to give a robust oscillator function among other things.

I would like to use it as an arc generator to do other experiments, 7imix has some good video's of it's operation in different modes.

Cheers
cikljamas

[Farmhand]

Seth, that is only free energy if the food you eat was free. Just kidding. but that would be a handy pesonal light if the ground rod could be somehow replaced or a good static light if the human was replaced. I wonder would it work with a potted plant instead of the person. I have to try not to be so interested in everything i read, now I have to try that too.

I was thinking of trying to develop a garden light that just works 24/7 by pushing it into the ground, using ground and maybe air charges. What you posted seth could be a head start in that direction.

Cheers