This is it !

[Guruji]

Song

I couldn't think of what else to do so I watch this,

YouTube - OFFICIAL Somewhere over the Rainbow - Israel "IZ" Kamakawiwoʻole

And I listen to the words.

Hi Farmhand that guy on tha video song lives on water only? LOL

[gmeast]

spark gap

What do you mean by unoffensive spark gap? A gap that does not produce light and sound as waste byproducts? There is such a thing as an unoffensive spark gap if this is what you mean -- vacuum tubes. There are tubes which were made specifically to be spark gaps, and a small fluorescent bulb will also work, as well as a dead lightbulb. Each of these can allow a spark gap with less sound and light as a byproduct. They aren't, however, adjustable.

For an adjustable spark gap, a multiple spark gap will probably help. Here's an example of a multiple spark gap I built.

Oh I was just kinda' talkin'. Any spark gap I've had running generates a wideband broadcast the wipes out communications and TV across the spectrum. I would always piss off the neighbors when I was messing around, That's all I meant.

[gmeast]

cuckoo's nest

Well, i came back here to relax my minds from people that should be in
mental institution and not walk free among others (and majority of
those others should be also in mental institution)...Or maybe the only
one that shoul be in mental institution is ME ?...Could be !
Hm, One flew over the cuckoos nest is not by accident one of my the most loveable films of all times...The end...
Ok, let see what we have to say about electronics stuffs :
Gmeast, thank you for your answers
Maybe you could only suggest me some transistors and mosfets by tips:::
Farmhand, yes, i tried toroids with stingo, what exactly do you want to
know about that ?
Now, i am going to attach one Sucahyos circuit that Sucahyo said (if i
understood him well) that could be effective same as this one with
maxim4049...
What do you think about ?
But whatever you think this night i am going to dedicate to this stuff...
And one more thing...I made accurate measuring on my stingo and
now i have precise result : on the imput 23 mA
on the output 20 mA
NOw, what do you think, can i jump across this difference of 3 mA
by the help of 100 uF and 80 V on the output comparing 12 V on the
imput in order to achieve OU ?

Yes, I will convey power component suggestions a s soon as I have tested a few on my PWM which I have yet to build. I'm getting my 2060's monday. I've always avoided 555 timers for some reason. Maybe I'll try one here and use the 2060 for the output.

In the movie 'One Flew Over the Cuckoo's Nest', remember the scene at the marina? This was a good lesson on judging other people. When each of the patients were introduced as "Professor this" or "Doctor that", they looked like the Doctor or the Professor ... maybe unkempt, definitely eccentric-looking and knowledgeable , educated. But we knew by watching the earlier parts of the movie that they were all 'LOONS" ... One of my favorite movies too.

I ask again ... is the 'stingo circuit video' called that because of the background music or is there an experimenter/poster named "Stingo". Go ahead everyone ... laugh ... I rarely get the punch line of most jokes anyway, so have at it.

Greg

[Farmhand]

Hi Guruji,

Hi Farmhand that guy on tha video song lives on water only? LOL

I didn't know that. Thats interesting. The message I got from the video was that the guy had passed, and rather than mourn his passing they celebrated his life. Hopefully one day we will have good reason to celebrate the live's of others when they pass. It is right to mourn I guess, but the passer on generally would not want people to be sad about it too much or for too long. I never really bothered to find out, thats just how it seemed to me.

Regards

[cikljamas]

Hi cikljamas what does this circuit do self runner?

It should be battery charger, but i hope i could use it for self battery
charging(one battery), i dont know is it that what you meant by self runner ?

I must say I am very honored to be in the presence of so many open minded people who still possess that fundamental trait of learning "curiosity".

I must tell you : We are the best part of human kind, we walk towards
stars, long time ago i wrote poems, and now i try to play a part of
very interesting game that has been suppressed so much time and that
had been brought to the daylight by my countryman Nikola Tesla...
So, who can say we are not right when we claim that we are the greatest

Yes, I will convey power component suggestions a s soon as I have tested a few on my PWM which I have yet to build. I'm getting my 2060's monday. I've always avoided 555 timers for some reason. Maybe I'll try one here and use the 2060 for the output.

Ok, we are going to wait your suggestions !

In the movie 'One Flew Over the Cuckoo's Nest', remember the scene at the marina? This was a good lesson on judging other people. When each of the patients were introduced as "Professor this" or "Doctor that", they looked like the Doctor or the Professor ... maybe unkempt, definitely eccentric-looking and knowledgeable , educated. But we knew by watching the earlier parts of the movie that they were all 'LOONS" ... One of my favorite movies too.

Look at this :
http://www.energeticforum.com/attach...1&d=1289633845
Now you tell me dont we think the same way ?

I ask again ... is the 'stingo circuit video' called that because of the background music or is there an experimenter/poster named "Stingo". Go ahead everyone ... laugh ... I rarely get the punch line of most jokes anyway, so have at it.

It must be a lot of stingo circuit videos...i suppose it is kind of joke...
My english is not so good that i could guess what is behind such a tricky
questions...

Now, i have to accomplish that 555 circuit...
Wish me good luck...

[citfta]

Stingo name

Hi Greg,

The Stingo circuit is an invention of Sucahyo. He said on another thread he called it that because when he first started working with it he touched the wrong part and got stung.

I ask again ... is the 'stingo circuit video' called that because of the background music or is there an experimenter/poster named "Stingo". Go ahead everyone ... laugh ... I rarely get the punch line of most jokes anyway, so have at it.

Greg

Hope this answers your question, Carroll

[gmeast]

stingo

Hi Greg,

The Stingo circuit is an invention of Sucahyo. He said on another thread he called it that because when he first started working with it he touched the wrong part and got stung.

Hope this answers your question, Carroll

Ok, thank you citftcitft/Carroll

[gmeast]

tricky question

.................................................. .................................................. .................................................. ..........................................
It must be a lot of stingo circuit videos...i suppose it is kind of joke...
My english is not so good that i could guess what is behind such a tricky
questions...
...

Really ... no joke, no hidden, no tricky question or anything. "Stingo" sounds like a person's Login or I.D. ... really. I just want to know.

Greg

[cikljamas]

It is half past 4 a.m. here, instead of doing that 555 circuit (dont know
what a **** this relay means, how it works, never saw such thing, it
has two positions and it seems he is active in both positions, so,
i do not know how to manage that )i made this ****ing pulsator, and
it seems to work but this VIN stuff should work like "after pot. point"
but it seems it doesnt work like that, because when i turn pot. left
and right nothing happens, values are all the same...I tried different
transformers and to be honest i am not sure how to use it...It looks
like astabil vibrator, generates high voltage on the primary...
This VIN should work, otherwise it doesnt make any sense...
I used TIP 31 as transistor...So, i tried, i expected much better
result, but it is what it is...Greg, it is your turn...I suggest you to
make this circuit on the test board, it is simple and doesnt take too
much time, so you can help us to go further with this circuit...
Beside this VIN puzzle, transformer is going to be key point of course...
And if somebody know how to manage this RELAY from that attachment
in one of my last posts (555 circuit) is welcome with advices !
Now i am going to sleep a little bit...Good evening to you and good
night and sweet dreams to me...

[Farmhand]

cikljamas, I'll try that circuit tonight, is this the one you mean, it has two batteries ?
No certainty, I could get distracted, i'll try, good practice for a beginer like me. Is it a "Stingo" if it is he looks funny.

[sucahyo]

Well I don't know what to say is there a theory behind the operating principal of this TPU?

Steven Mark mention it as electron accelerator. Maybe similar to Seike absorber available at Naudin's site.

I would honestly focus more on Tesla's work to see what he was doing first, then examine what can be found about Boyce's work that differs.

Can you list their similarity?

Oh I was just kinda' talkin'. Any spark gap I've had running generates a wideband broadcast the wipes out communications and TV across the spectrum. I would always piss off the neighbors when I was messing around, That's all I meant.

I break one monitor with spark gap too.

The Stingo circuit is an invention of Sucahyo. He said on another thread he called it that because when he first started working with it he touched the wrong part and got stung.

More silly reason than that actually lol, I had to sting my self to make the circuit work because the first stingo version use my hand as part of the circuit . 500K potentiometer replace the hand .

cikljamas, I'll try that circuit tonight, is this the one you mean, it has two batteries ?
No certainty, I could get distracted, i'll try, good practice for a beginer like me. Is it a "Stingo" if it is he looks funny.

No, this is 555 based radiant circuit where the relay is being used to dump capacitor charge. It is not self runner.

I don't use it anymore because I see stingo as better radiant circuit than 555 and cap dumping method heat the battery up. Bedini do not use coil at all on his cap dumping patent.

The relay:
two left terminal is what activate the relay if connected to battery.

The right bottom is the moveable terminal

the right-right top terminal is the normally connected terminal, the top middle terminal is the normally unconnected terminal.

[7imix]

I built the op-amp based impulser mentioned earlier in this thread. It looks very promising. I am going to hook it up to the Stingo next to get sharper, higher voltage impulses. Sharp, high voltage impulses without a spark gap is going to be great!

YouTube - Op amp based impulse generator

[crackahcrackah]

I am not settled on the transformer because I'm confused. We are NOT making Hydroxy. So then, is a secondary winding necessary ?

You do not need a secondary. One winding will create the inductive pulse. IT's recommended, for optimization, that silver coated copper wire is used as the shockwave (longitudinal wave) travels on the outside of the wire.

For the charging effect, don't we just want to direct the field collapse back to the battery via HV Diode(s)?

That appears to be what is done in the video's with watkykji. You can however improve upon the inductive field by using it to charge a capacitor which eventually breaks down the resistance in a spark gap. The whole "disruptive discharge" which Tesla wrote about. This then effects a secondary (if you go this route the secondary is needed, but follow Tesla's circuit's then, not Boyce's) which is used to power the load.

If so, then do we need three (3) windings ? Do we need three (3) different frequencies ? Do they need to be synchronized in some way. If multiple frequencies are used and synchronization is required then a Micro would be convenient, but in Tesla's day he would build a commutator with brushes in the proper arrangement to create the phase and synchronicity and then spin THAT with a motor to generate the PWM to pulse the coil(s). One way or another I think we need a toroidal core made from choice materials but I still don't know why THAT amounts to any more than pulsing a toroidal CHOKE. Last sentence is awkward I know.

I don't think it's any different but you need to keep the pulse rate down. The dV/dT is critical for influencing the strength of the inductive spike. The whole project can be simplified if you focus on Tesla's basic parameters, and from there, experiment with more than one winding, more than one frequency (harmonics only though, I would imagine).

However you design what you design, if a HV fuse can be placed on the line in between the FET and the inductor you can prevent frying a lot of FETs. I haven't done this yet myself, but I fried a bunch as I played with increasing the frequency. I posted a lot on another forum regarding my own observations with this effect. If I can dig up those posts, since that forum is gone, I'll do so and paste the experimental observations here. It would help to a degree with the questions people have. I can't recall every thing from memory as it's been months since I could test this stuff due to poor circumstances for myself.

[crackahcrackah]

You don't see it ? I'll try this way. By pulsing the three primaries at 120 degree spacings in "time," "phases" which are the pulsed windings, the flux intensity is switched back and forth around the ring ( maybe only one way ) which means the flux intensity must move (around the ring), which causes extra induction into the secondary. Wouldn't it? He talks of the magnetic intensity whirling around.

A Flux Flywheel ?

That's an accurate description of it from my own research on it. It's an efficiency improvement on what Tesla had done, but since hardly any one has replicated it, it's hard to say what kind of difference you get. From my understanding, it can be quite substantial. It's a vortex essentially.

[Farmhand]

Quote:
Originally Posted by Farmhand
You don't see it ? I'll try this way. By pulsing the three primaries at 120 degree spacings in "time," "phases" which are the pulsed windings, the flux intensity is switched back and forth around the ring ( maybe only one way ) which means the flux intensity must move (around the ring), which causes extra induction into the secondary. Wouldn't it? He talks of the magnetic intensity whirling around.

A Flux Flywheel ?

That's an accurate description of it from my own research on it. It's an efficiency improvement on what Tesla had done, but since hardly any one has replicated it, it's hard to say what kind of difference you get. From my understanding, it can be quite substantial. It's a vortex essentially.
Today 05:04 PM

Thank goodness somebody else noticed that I don't understand how it can't bee seen, but anyway, with the quad coil arrangement of Nikola's design each opposite pair are parallel connected, and fired 90* out of phase is it.

So the magnetic intensity moves a quater turn with every 180* rotation of the source generator, I think and so on, so the effect at high frequency would be to have a pair of magnetic intensities, or is four whatever rotating around the circular core at very high rate, if true this would behave just like a very high speed flywheel without the weight. Probably the worlds most efficient generator flywheel ever conceived. It would also explain a lot of other things like the flywheel restart effect (taking less energy) maybe I dunno you guys can work that out ?

There ya have it, it fits with the other theory I uncovered funny that.

Harvey would know I think he's really smart in these area's. I really don't know it's just what I see. All things I learn here 1 + 1 = 3 .

Cheers.