Electrostatic Induced Generator (Free Energy)

[peakprodk]

Attached drawings of proposed EIG. I do not have the facilities to build this, but anyone into High Voltage should have no problems, it is pretty simple.

Watching;
YouTube - Charging By Induction
explains the theory very well.

Free Energy to the World!

Useful comments appreciated.
peakprod

[Farmhand]

In my opinion that looks like a very simplified version of the whimshurst machine, looks to me like it will work, I have no idea how one would work out the relative output.

Good work, Great video too.

Oh yeah and welcom to the forum.

[peakprodk]

Eig

Thanks Farmhand, I cannot take credit for the video, it shows my principle very well though!.. Not quite whimshurst, we do not want the sparks! peakprod

[sebosfato]

Thanks Farmhand, I cannot take credit for the video, it shows my principle very well though!.. Not quite whimshurst, we do not want the sparks! peakprod

If it is moving it will need energy to take separate the charges thus is not free energy. The right concept you can find on my thread. Free energy obviously... no moving parts proposed.

You cannot make it copywrite anyway...

[peakprodk]

Eig2

Thanks sebosfato, you make me think more. New Drawing of EIG2 with no moving parts is attached.

As for the copyright, I can copyright my own drawings!
Thanks again peakprodk

[Farmhand]

I like that one too will it work ? The first one is still very interesting to me it spins !

[Farmhand]

peakprodk, Is there a way to make the first device you have shown us, counter rotating by it's own forces?

[peakprodk]

Eig2

Farmhand, the metal balls would atttract each other with there own electrostatic attraction, a small motor would be required to turn the rotor.
The second one i'm sure would work using a center tapped transformer, and using a centre zero +kv -Kv power supply to cgarge the outer balls. The centre of the stator would be very close to zero volts when the switch is closed, the charge in each stator ball would then be earthed on switch closure, so there would be no HV to switch. Regards peakprodk

[sebosfato]

Thanks sebosfato, you make me think more. New Drawing of EIG2 with no moving parts is attached.

As for the copyright, I can copyright my own drawings!
Thanks again peakprodk

Peakprodk

Ok now you just used the principle i have discovered and described for free, and you want to copyright it?

You is one of the only ones who understood what i said in my thread, than why don't we think about the thing together? do you want?

I want to make it solid state, cause would make at a certain frequency to use the effect more effectively at maybe millions times per second. It has to do with behavior of the electrons as waves. Standing waves. Meyer with his bifilar coils have done it. With his bifilar coils. My belief is that he used the bifilar to create resonance and to be able to couple only the capacitive side of the coils to the load, as one can be made to completely cancel the other inductance you could make the other to resonate with a capacitor and the electric field within the coils would move the electrons creating an electricity caused by the force of the electric fields on the electrons of the wire. On one side of the coil you will have 0 volts on the other you will have 40kv... he said he could do it capacitively in my understanding according to his writings.
He talked about dynamic coherent voltage something like that.

Basically adjusting the lengh of the coils you can find a variable relation of electro and magnetic fields.

You feed the load without loading the resonant tank.

[madhatter]

Peakprodk

Ok now you just used the principle i have discovered and described for free, and you want to copyright it?

You is one of the only ones who understood what i said in my thread, than why don't we think about the thing together? do you want?

I want to make it solid state, cause would make at a certain frequency to use the effect more effectively at maybe millions times per second. It has to do with behavior of the electrons as waves. Standing waves. Meyer with his bifilar coils have done it. With his bifilar coils. My belief is that he used the bifilar to create resonance and to be able to couple only the capacitive side of the coils to the load, as one can be made to completely cancel the other inductance you could make the other to resonate with a capacitor and the electric field within the coils would move the electrons creating an electricity caused by the force of the electric fields on the electrons of the wire. On one side of the coil you will have 0 volts on the other you will have 40kv... he said he could do it capacitively in my understanding according to his writings.
He talked about dynamic coherent voltage something like that.

Basically adjusting the lengh of the coils you can find a variable relation of electro and magnetic fields.

You feed the load without loading the resonant tank.

Being new here I'm not aware of Meyer but from what you've posted I know what he's talking about. I posted something I came across in the shop the other day and from working on PM generators and antennae designs I'm finally getting what is going on. for yrs the std electrodynamic lessons I received only got in the way, recent research I've been doing based on questions that can not be answered by the accepted model are filling the gaps and showing that there is ALOT more to it.

you don't have to have rotating assemblies in fact I believe that only causes more trouble. vibrating the 'insulator' material to create the high potential then capturing it with the right antennae is all that is needed. After working on some ideas then the coils that Tesla used become antennae directly, if the charge is fed to the coil it doesn't work, however the coil will transmit the charge to the load wireless.

[peakprodk]

Eig2

sebosfato, I am a 72 year old pensioner, no money to build things, but lots of time to think! If I were to experiment with this I would build the EIG2 and measure the current that is induced in to the stator, when earthed or not earthed. From there appropriate windings could be worked out and tried. With resonance a major factor. In my youth I was an electronics engineer, just when transistors first appeared. I am afraid that I am lost when it comes to 'dynamic coherent voltage' etc. I will have to look at Meyer.
Madhatter, keep at it we are all getting closer to the answers!

[sebosfato]

HELLO,

Nice, to heard from you. Meyer always talked about using voltage as a force, and that voltage alone could do work. I found that the only way it can do is by electrostatic induction. He used a bifilar coil, and talked about using the capacitance and inductance proprieties of his coils to transform dynamic voltage potential, into coherent voltage pulses. For me is all about electrostatic induction.

[tutanka]

an other solution..

Hello,
That can be other solution, you can use low cost microwave oven parts and build an home generator or an tesla transmitter. You can use the same circuit in reverse mode as receiver. Regards

[tutanka]

an advanced solution

Instead that is advanced solution based on Gray tube, you can use every HV diode and MOT transformer that you can found inside an microwave oven

[abdelrahmanamr]

Is this thread still alive?

hey, peakprodk u still replying to this thread? because i had almost the same idea and researched about it for about 4 month and i have some pretty useful comments