Donald L. Smith

[Farmhand]

Halide Transformer Specs

Hi kcarring, Do you have any specs for your transformer Input voltage
frequency and output voltage frequency? I can only find specs that state
input specs no output specs. Maybe they have something to hide.

7imix I have most of the stuff from there, it'll take me a little while to gather
and upload it, I had intention to do it, so I will. As soon as I can. some of it
is old info so i'll upload all the new stuff or what is not availiable elsewhere.

I'll post a link here when I get it done.

Cheers

[sebosfato]

Did you liked the exel sheet?

I think that i wanted to mean that the free electrons would fly from turn to turn aiding the flux cause of the great E-field between the turns.


Probably, would be perfect if the coil sit inside a glass vacuum chamber and the wires had some high conductive and low work function coating material. But this would be possible only for N.A.S.A tests

Hope you enjoy

[Farmhand]

Did you liked the exel sheet?

I think that i wanted to mean that the free electrons would fly from turn to turn aiding the flux cause of the great E-field between the turns.


Probably, would be perfect if the coil sit inside a glass vacuum chamber and the wires had some high conductive and low work function coating material. But this would be possible only for N.A.S.A tests

Hope you enjoy

I haven't had a chance to view the exel sheet yet, i will have to use a
different computer, when I get permission. I can't see it on mine but there
are others here I can use soon.

Thanks very much.

[lamare]

There's a very interesting word document with info on a.o. Don Smith here: http://www.ut27972.narod.ru/Book_2/8...E_ENERGY_1.doc

[SuperCaviTationIstic]

Oh Ya!!!!!
This is what I've been trying to tell everyone! you need a pumped phase conjugate mirror! opposing magnetic fields! Duh!

DON SMITH IS NOT A FRAUD

HE JUST COULDN'T TELL YOU ALL THE DETAILS, BUT HIS HINTS WITH TESLA GAVE IT AWAY IF YOU REALLY LOOK!

now go look at some pictures of a magnetron and see that it does the same thing (sort of)

you feed current into the center neutral node of a phase conjugate (mirror image) resonator....

It's just like those stupid fusion reactors they keep trying to build, with MAGNETIC CONFINEMENT, those idiots try to put it into continuous mode, rather than pulse it.

Thanks for the wonderful find Lamare!

[sebosfato]

Yes i think That very few of those inventors with patents are fraud. Don certainly was not. I see in his eyes that he know what he is talking about.

If you don't look at it with a point of view from the high to low (superiority) you have the chance to go further and understand what they say, but if you think its impossible you have no chance.


Tesla was very wise guy!

Thanks lamar will check that.

[Farmhand]

Arrgg, I can't view that file either. It says an install on demand componant is needed. Will that make it work ?

sebosfato I still haven't been able to look at the XLS file either what do I need to see that ? I thought the other computer would do it but it won't.

Do I need microsoft office or something. I don't use that stuff. I'm not qualified for that. Haha

I hope to get some copper plate friday.

I have this circuit that can oscillate a coil with a clean switching mosfet at 1.5 Mhz. Easy 200 Khz, if I can make it oscillate like that with a Hv output coil, it could be usefull to take place of the NST.

ShotsMhz 002.JPG - Windows Live

Here's the waveform at 1.5 Mhz. Input is about .5 amp though, maybe I can get it down. It's less than 100 Ma input at 200 Khz.
http://public.bay.livefilestore.com/...003.JPG?psid=1

Cheers

[Farmhand]

Hi all, I found this old thread, started by sebosfato, By my last post here in
January last year I was frustrated by my lack of knowledge so I set about
trying to understand resonance a bit better. Now I'm ready to have another
go at it.
I am still to decide exactly how I will make the coils. I'm very much at the
beginning of my attempt to produce the desired effect.

I think sebosfato gave some good practical tips and some of his opinions may
well have some merrit. It's obvious that one year ago when I last posted in
this thread I was one years more of a beginner than I am now.

Anyway to cut a long story short I'm going to post in this thread so as not to
disrupt the other efforts.

Ok so I was watching this video again.
Don Smith Free Energy - Video

From 1:40 mins to 8:20 mins, at 2:08 mins he mentions they are utilizing the
casimir effect. At about 4:50 mins he says they are using a special capacitive
inversion circuit and utilizing the casimir effect. He seems nervous or hurried
and makes a small speaking mistake when he says they are producing AC 120,
DC 12, AC 140 and AC 480, he should have said AC 240 instead of AC 140.
Honest slip of the tongue.

He also talks of a resonant backfeed. The capacitive inversion circuit sounds
interesting.

He says near the end the system can be closed, which indicates to me that
the system he is showing is not closed. This is a bit confusing because I think
he says they are using batteries. If it is not closed then that means there is
an external input. Or maybe he is saying the batteries can be removed.

I'm fairly confident I can get the cap charging action happening, but it's the
transformation/conversion to a useful AC output that I see as the problem to
overcome. Maybe the capacitive inverter is the trick for dealing with the HV output.

Cheers

EDIT: Oh one other think I thought notable was that I think he said they were
using a "variac" to control the output transformer. I wonder how that control
is implemented. A Mag-amp or something could be a possibility in my opinion.

The first document says they were used to regulate the frequency of the
output of an AC generator in German rockets.

http://ia700402.us.archive.org/29/it...Amplifiers.pdf

Magnetic amplifier - Wikipedia, the free encyclopedia



..

[FRC]

Farmhand

I knew you were at this long before the other thread got revitalized. If they knew you had been investigating this for so long they might not have been so hard on you at the other thread. I think they took you the wrong way over
there. Hopefully they will see the truth of your approach.

George

[bboj]

Don S. is constantly pointing ot the source of the energy - the ambient.

Radiations, particles? Does anyone have an idea what is he suppose to collect?

If we know the source of the energy it should be easyer to construct a device to collect it.

[Farmhand]

Don S. is constantly pointing ot the source of the energy - the ambient.

Radiations, particles? Does anyone have an idea what is he suppose to collect?

If we know the source of the energy it should be easyer to construct a device to collect it.

Very good point, take fishing for example, when I fish for Barramundi I don't
just go and throw any old bait on a hook anywhere in the water. I go and
catch the small live fish or live prawns that the Barramundi feed on, then I
place the bait on the hook so the bait is not killed that way when I cast the
bait and hook into where the fish feed the bait struggles, the struggling bait
sends out a signal in all directions (vibrations) (the smell of the bait only goes
with the current) the barramundi follows the signal of the struggling bait to
it's source and eats it, then the fun begins. My point is, the bait is
irresistible, if everything is prepared the event happens. Live bait sends out
an active real time signal in all directions, dead bait just smells.

The goal in this case is the enjoyment of catching the fish, if it was just
getting the fish then the easiest way is to use a 4 inch gill net. However
that is illegal except for licensed fisherman.

Your question is very valid. I've heard all sorts of different theories from
electron spin, free electrons to creating a "sink" or funnel, even just straight
out resonance.

I'm going to catch the bait (make the device) set the bait ( set the device to
work) then see what happens, If I don't get a strike I'll make the bait struggle
differently or throw it in a different place.

How that for speaking in riddles. Clear as mud.

I think the source of the energy is the "Ambient background" or the "Aether".

So obviously we need some live bait for Aether. And we need to keep it
struggling and we need to use less bait than we catch with that bait.

Sounds easy.

In reality the source of the energy is just energy itself.

If I were to look at a device that was theoretically producing 100 kilowatts "useful energy"
with only 5 watts input, I could safely say that the device was not actually
adding anything to the Universe as a whole. And in the same way if I were to
look at a device which was using 100 kilowatts and only outputting 5 watts in
"usable" energy I could also say that that device was not removing anything
from the Universe.

These obvious truths tell me that it is entirely possible to harness and use
energy in any gain ratio inverse to any loss ratio possible. To me this
possibility is what I look for.

Losses go to zero and stop but gains don't have that limit. ie. If I have 100
units of energy and I am experiencing a 50 unit loss per minute then I get two
minutes of energy before it's all gone. However if I am getting a 50 unit gain
where does it end ? I would either need to burn off energy (unharness it) or it
would unharness itself.

To me a 50 unit gain per minute is not Over unity it's just the opposite of a 50
unit loss per minute.

Admittedly it's all just words. Proof is in the pudding. The recipe and the method are just details.

Anyway that's how I see it.

This isthe nature of nature.

Cheers

[Farmhand]

Looking at Don's drawing, it seems that the positive is made the neutral and the
negative is the active. I'm sure that's already been noted by most but I thought
i would mention it.

If we take out the voltage divider resistors and Item #8, which Earth
connection would we need to remove for the circuit to make sense ?
I would say the connection near item #11 to the far right on the negative is the odd one out.
Any other thought's on that ? EDIT: Maybe that Earth connection would make
sense if it was 15 meters away from the others and the operating frequency
was 4.7 Mhz or something.



Uploaded with ImageShack.us

It makes more sense to me if I draw it like this. Maybe it's my lack of
electronics knowledge but the orientation of the inverter transistors seems
strange otherwise.


Uploaded with ImageShack.us

This is a sketch of what I touched on in the other thread about the rotary
capacitor idea. Dragon mentioned a three plate capacitor so I'm thinking he
had a similar revelation before I did. I was given the idea by a poster in the
other thread, this is what my mind came up with as a solution. It's possible
I've seen it somewhere before or a drawing or something.

The principal is that, as the two rotating plates connected to either output
transformer primary winding swing past the fixed plate, a capacitor is formed
and energy transferred, as the plate swings past the capacity increases to a
maximum then decreases to nil when the other one starts its pass.
The primaries are wired to produce AC like an inverter.



Uploaded with ImageShack.us

However a much better way would be to do it without any rotating parts. So I
don't think i will be trying to build a rotary setup. A rotary setup would require
a complicated build. And could be dangerous. There must be a better way
with out using HV transistors for the inverter.

Cheers

[Dave45]

Don S. is constantly pointing ot the source of the energy - the ambient.

Radiations, particles? Does anyone have an idea what is he suppose to collect?

If we know the source of the energy it should be easyer to construct a device to collect it.

Did someone ring my bell
I cant help it Im in a good mood today

Lets see where to start, skip through this thread
http://www.energeticforum.com/renewa...ld-magnet.html

[Dave45]

Very good point, take fishing for example, when I fish for Barramundi I don't
just go and throw any old bait on a hook anywhere in the water. I go and
catch the small live fish or live prawns that the Barramundi feed on, then I
place the bait on the hook so the bait is not killed that way when I cast the
bait and hook into where the fish feed the bait struggles, the struggling bait
sends out a signal in all directions (vibrations) (the smell of the bait only goes
with the current) the barramundi follows the signal of the struggling bait to
it's source and eats it, then the fun begins. My point is, the bait is
irresistible, if everything is prepared the event happens. Live bait sends out
an active real time signal in all directions, dead bait just smells.

The goal in this case is the enjoyment of catching the fish, if it was just
getting the fish then the easiest way is to use a 4 inch gill net. However
that is illegal except for licensed fisherman.

Your question is very valid. I've heard all sorts of different theories from
electron spin, free electrons to creating a "sink" or funnel, even just straight
out resonance.

I'm going to catch the bait (make the device) set the bait ( set the device to
work) then see what happens, If I don't get a strike I'll make the bait struggle
differently or throw it in a different place.

How that for speaking in riddles. Clear as mud.

I think the source of the energy is the "Ambient background" or the "Aether".

So obviously we need some live bait for Aether. And we need to keep it
struggling and we need to use less bait than we catch with that bait.

Sounds easy.

In reality the source of the energy is just energy itself.

If I were to look at a device that was theoretically producing 100 kilowatts "useful energy"
with only 5 watts input, I could safely say that the device was not actually
adding anything to the Universe as a whole. And in the same way if I were to
look at a device which was using 100 kilowatts and only outputting 5 watts in
"usable" energy I could also say that that device was not removing anything
from the Universe.

These obvious truths tell me that it is entirely possible to harness and use
energy in any gain ratio inverse to any loss ratio possible. To me this
possibility is what I look for.

Losses go to zero and stop but gains don't have that limit. ie. If I have 100
units of energy and I am experiencing a 50 unit loss per minute then I get two
minutes of energy before it's all gone. However if I am getting a 50 unit gain
where does it end ? I would either need to burn off energy (unharness it) or it
would unharness itself.

To me a 50 unit gain per minute is not Over unity it's just the opposite of a 50
unit loss per minute.

Admittedly it's all just words. Proof is in the pudding. The recipe and the method are just details.

Anyway that's how I see it.

This isthe nature of nature.

Cheers

The shorted coil as in the pmh is the bait it will get the aether charged and circling the bait.

[Farmhand]

I bought one of these cheap neon power supplies on ebay, so I pulled it apart
because I'll be using it from a true sine wave inverter it has a European plug
and I wanted to see the whats happening with the AC input ground and
neutral wire's. This unit will never be plugged into the grid.

I think it cost $15 or something.
http://www.evertron.net/SP230V/006_0086.pdf

This is what's inside, it looks like an AC flyback.



Uploaded with ImageShack.us

It's using IRF740 mosfets by the looks of it, (with big heat sinks)



Uploaded with ImageShack.us

Cheers

P.S. It also has these parts-

a CD4536BE, (Timer)

CD4536B pdf, CD4536B description, CD4536B datasheets, CD4536B view ::: ALLDATASHEET :::

and a IR2153 (Self Oscillating Half Bridge Driver) This looks like a neat little part.
IR2153 pdf, IR2153 description, IR2153 datasheets, IR2153 view ::: ALLDATASHEET :::

..