The Edwin Gray Pulsed Capacitor Discharge Electric Engine

[toranarod]

Hi Again
I am totally obsessed with the pulse motor work as you have probably gathered by now if you have seen my other post. I have made tremendous gains in understanding theses motors. They are a very complex technology and work as precession engineering.

This is why the Link below is got me to start this thread.

Photographs of Edwin Gray Pulse motor

has any body got a link to more detailed plains of what was the theory behind this motor.
cheers Rod

[N O G]

Gray motor

Hi there Toranarod,
Thanks for the link , Ive never seen pics like this before.I love pulse motors too and when i seen this i just sat back and smiled for some reason which was cool.I think theres lots to learn about this motor and only a few have probly got there heads around how to build it from his patents.Ive studied some of this stuff but some of these photos dose get you thinking it can be built.(non of the links on the site worked for me though, i dont like stuff that says click on me now etc) Cheers Jason

[citfta]

Hi Rod,

If you do a search on this forum you will find some info about E. V. Gray. There is also an E. V. Gray yahoo group that has quite a bit of info. You may already know about these but I thought I would pass on what little info I knew just in case you didn't. I am really enjoying your other thread about the Adams pulse motor. Good luck in your quest.

Carroll

[toranarod]

Hi there Toranarod,
Thanks for the link , Ive never seen pics like this before.I love pulse motors too and when i seen this i just sat back and smiled for some reason which was cool.I think theres lots to learn about this motor and only a few have probly got there heads around how to build it from his patents.Ive studied some of this stuff but some of these photos dose get you thinking it can be built.(non of the links on the site worked for me though, i dont like stuff that says click on me now etc) Cheers Jason

Thanks for your reply, as you say the links don't work.
I would love to know how close they are to each other. The 3 of them. Did Bedini know him did he know of Robert Adams are these guys some how connected. who was first?
are they all working from the same theory of physics. My research suggest there is one common electrical phenomenon to exploit in any magnet motor.
the only difference is how did he exploit it.

[toranarod]

Hi Rod,

If you do a search on this forum you will find some info about E. V. Gray. There is also an E. V. Gray yahoo group that has quite a bit of info. You may already know about these but I thought I would pass on what little info I knew just in case you didn't. I am really enjoying your other thread about the Adams pulse motor. Good luck in your quest.

Carroll

I am looking around. his motors appearers a lot more complex than the others I have seen.
Thanks
cheers

[Joit]

There is kind of a Block Schematic and parts of the Motor.
http://www.free-energy-info.co.uk/Chapter5.pdf Page 5-38.
I dont think it is to complicated, when you know how to arrange the Parts.

[toranarod]

There is kind of a Block Schematic and parts of the Motor.
http://www.free-energy-info.co.uk/Chapter5.pdf Page 5-38.
I dont think it is to complicated, when you know how to arrange the Parts.

Thanks. Thats very helpful.
best Regards

[ren]

Hi Rod.

I believe the pictures you linked are designs built by Alan Francoeur who I believe resides in Canada. He has been closely involved with Gray tech for sometime now and has built quite a few different units. He also has some of the original Gray motors I believe.

He runs a yahoo group called ALF I think. You would find lots of info on that.

Regards

[Shanjaq]

What charges the capacitors?

[ren]

What charges the capacitors?

Inductive discharges. Or a transformer. Depending on what you are after.

[Peter Lindemann]

Info on Ed Gray's Technology

Hi Guys,

I became aware of Ed Gray's technology in 1973 and watched the whole story, as it happened. My book, The Free Energy Secrets of Cold Electricity, is still the most complete thesis on how the machine works. Here's a link to the page on Ed Gray at my website.

Free Energy | Edwin Gray

I hope this helps.

Peter

[erfinder]

Inductive discharges. Or a transformer. Depending on what you are after.

Most excellent response....I second the inductive discharges....

Ren,

I'm Almost there......will contact you soon...

Regards

[toranarod]

Hi Guys,

I became aware of Ed Gray's technology in 1973 and watched the whole story, as it happened. My book, The Free Energy Secrets of Cold Electricity, is still the most complete thesis on how the machine works. Here's a link to the page on Ed Gray at my website.

Free Energy | Edwin Gray

I hope this helps.

Peter

Thank you Peter

Has any body ever created any kind of motor based on the ideas put forward

by theses plans?

[Peter Lindemann]

Historic Data

Thank you Peter

Has any body ever created any kind of motor based on the ideas put forward

by theses plans?

Dear Toranarod,

The information I have published are not "PLANS" for the motor. No one has a set of blue prints for the motors Ed Gray built. The purpose of giving you the link is so you can see real photographs of Ed's machines, taken in the 1970's when it was happening. Most of the pictures you have in this thread are of Al Francour's machines, and even though Al has worked on trying to restore some of the old Ed Gray machines, he doesn't have one running either. I know, because I talk to Al on a regular basis.

I agree with you that "pulsed motors" are the way to go. I started looking at and studying Ed Gray's system in 1973. What I have learned over the years is that it is much easier to produce an "enhanced torque motor" than you think. If you haven't already looked, you may find what you are looking for in the thread here: http://www.energeticforum.com/renewa...lindemann.html

Beyond that, I do not wish to divert this thread from its natural progression.

Best wishes,
Peter

[ltseung888]

Common theory behind Pulse Motors?

Dear All,

I posted the common theory behind Pulse Motors at:

http://www.energeticforum.com/renewa...tml#post136712

It was half complete and then I found the excellent posts from Rod. He essentially completed the other half of the theory and confirmed it with his brilliant work.

So the mystery of the Tong Wheel, the Bedini, the Adams, the Wang, the Liang and the 225 HP wheel is gone. Both the Liang and the 225HP devices have multiple wheels on the same axle. They both have programming. Rather than blind pulsing, they have “open eye” pulsing to achieve the high efficiency and the high output.

Blessed is the Almighty. HE guided me to other servers of wine. Amen.