Ignition Secrets by Aaron Murakami - *** NEW RELEASE ***

[Aaron]

Please support Energetic Forum by purchasing Ignition Secrets from this banner:

Or click on this link: Plasma Ignition

Many of you here know about the plasma ignition systems and also the
simplified method that I came up with.

But anyone that doesn't want to scan through thousands of messages
and spend a lot of time with trial, error, etc... can get a concise walk
through with my book and video package.

[teslaproject]

Everything is Vanity

- - GM Patent for Plasma ignition and engine back in 1975 that runs VERY lean fuel mixtures. I'm sure one day when the planet gets close to sapping its last barrels of oil they will release a 'new' car and say "Plasma technology people!!!" and the dopey brainwashed masses will oohhh and ahh and rush to the nearest dealership.
Plasma jet ignition engine and method



TP

[Aaron]

plasma ignition

Almost EVERY major auto manufacturer has a patent for plasma jet ignitions.

The latest was in the last couple years I found for Mazda for a rotary with
a plasma ignitor "plug" too.

But, I did originate the plasma effect coming from the same power capacitor
used with a CDI WITHOUT the need for a secondary power supply.

I also have been able to make it work with MSD units that others couldn't
and I show an example of this in the videos. The MSD's have choppers so
the cap isn't connected steadily to the primary of the ignition coil and
diode but I got it to work with the way I was switching it. Not really sure
why others couldn't get it to work but I show what I did and what unit
I used.

[N O G]

Spark

Hi there Aaron,
Thanks for putting together something like this . I have a little 4wheeler motorbike that chews spark plugs all the time (cheap cdi ) so this might be a good time to try some experiments in this area.I haven't got a copy yet but am going to get a copy when i can .cheers Jason

[Aaron]

plasma ignition

Thanks Jason - just sent you a private message.

[Bobbyd]

This looks like something i'd be into.
Have you sold a few?

[Aaron]

Plasma Ignition

Hi BobbyD,

Quite a few actually and I haven't even promoted it yet. It is posted in
this forum and I told some affiliates that is about it. Some affiliates are
posting it around the forum bit by bit.

It will be sent to newsletter lists next week, then a lot of people will know
about it.

This is the type of response I'm getting:

"Thank you for Ignition Secrets, I have consumed all materials AND bonuses within hours of immediate download and am already building my own equipment. Please deny me the right for a refund (as I have already received incomparable value and insight) and release me from the need to wait 70 freaking days for the other bonuses.

Pat Balemi
Creative Revolutionist. New Zealand.

PS. You may use my name and testimony in promotions of this material as you see fit. "

I was even contacted by a senior engineer at one of the largest
auto manufacturers in the world - he was a bit skeptical then I sent him
the patents owned by his own company relating to a variation of the
plasma type ignitions! He probably won't be sleeping for a while.

[Aaron]

Ignition Secrets a few Q & A

I want to answer a few things that have been asked or have come up
in one way or another.

Q: Am I claiming to have invented the plasma ignition?
A: No, I never have. I invented my method of creating the plasma without
the need of a secondary power supply, only needing 2 points (gap), etc...
That is what I refer to as the Murakami Ignition because that is exactly
what it is - I am the sole inventor of it. Anyone claiming that I am trying
to take credit for inventing the very concept of a plasma ignition system
is simply spreading misinformation and cannot be trusted. This forum has
record of all of this and not once have I ever claimed to have invented
plasma ignitions.

Comment: There are some that have tried to apply my method to off the
shelf MSD's and couldn't get it to work. I was told that the cap in the MSD
is chopped, which of course it is but was told that the cap isn't in contact
with the primary long enough. Well, it worked with every CDI and MSD I tried
and in Ignition Secrets, I give a recommendation for a very inexpensive
MSD unit that has worked perfectly with many tests, etc...
I give the exact circuit I used to trigger it with no problems. I still do
not know why others couldn't get it to work - follow my directions in
the book and videos and you'll get the same successful results I got.

Comment: Someone that is convinced they are an expert on my own
experiments thinks that my method won't work on a car with a distributor.
Well, little do they know that plasma ignition systems have already been
sold for a while that send the plasma through a distributor and it works,
period. Skeptics can utilize bypass mode, which I address in the bonus
package later on - and that is just one small part of the bonus package.

Q: Is Clickbank a scam?
A: No, Clickbank is one of the most respected
online companies that helps digital publishers offer their content with a
network of thousands of affiliates. I have used them for several years and
am very happy with them. There are some people that use Clickbank as
their platform to scam people unfortunately but it is easy to spot them.
When you see claims that you'll get off the grid for a couple hundred dollars
or will have some mysterious Tesla magnetic motor that will run itself and
make your power bill disappear, well, those are all scams. Ignition Secrets
is a very legitimate book and video series that offers what it claims and
is backed by thousands of hours of experiments conducted with my own
two hands. And there are many members here that have a lot of experience
with all kinds of variations of the plasma ignition systems. It works, it does
what is claimed.

Q: Can't I just learn how to do all of this from this forum?
A: Yes, that is what this forum is for. However, there is so much
information dealing with plasma ignitions, it is just
very, very time consuming - I don't know how many people have asked
me over the last few years to just make it easy for them.
If it took 100 hours to pour through thousands of posts, wondering what
parts to buy, etc..., you'd be getting off lucky and if so, at $37 retail,
your time would be worth 37 cents per hour. Ignition Secrets is the
best bet that anyone has that wants to zip thru the maze in a short
period of time.

[vrand]

Please support Energetic Forum by purchasing Ignition Secrets from this banner:

Or click on this link: Plasma Ignition

Many of you here know about the plasma ignition systems and also the
simplified method that I came up with.

But anyone that doesn't want to scan through thousands of messages
and spend a lot of time with trial, error, etc... can get a concise walk
through with my book and video package.

Thanks Aaron, that was the number one reason for me. Your videos also explained the whole range of possibilities and was very thorough.

Please continue to experiments and publish your findings!

cheers
Mike

[Aaron]

Thanks Mike!

Thanks Mike!

There are some other things I'll add to the same package when I can.
All the fundamentals are there but I will add more - anyone that purchased
the package will get any add on's, etc... for no extra charge of course.

[N O G]

Spark

Hi there Aaron,
Thanks for the message you are always so helpful. cheers Jason

[RolandSaffy]

- Do U have a schematic of some type that I might look at- I might want to dabble in it- Thanks Roland

[Aaron]

schematic

Hi Roland,

You can get everything in my Ignition Secrets package by purchasing it.
Or you can comb thru the water sparkplug thread for a lot of different
variations.

[Aaron]

Brisk Yttrium plugs

Brisk Yttrium non-resistor triple electrode plugs are showing to possibly be
the best off the shelf plug you can get. They are about $8 each.
I would just leave the ground electrodes and not make a surface gap plug.
Tests are done with the stock configuration.

The estimates are 20,000 miles with the plasma ignition that was tested. 20,000
miles is quite a bit more than just a couple thousand if even that. $8 per
plug is nothing if they last that long with the plasma ignition.

I will post details of these tests when I can but this is what I'd recommend
for a plug to use for plasma ignitions at the moment. Maybe there are better
ones but this is what appears to be the best for now.

[AetherScientist]

What about the endothermic implosion?

Hi Aaron,
I just want to ask you if you explain something in your book about a video you made some time ago about the "implosion spark". You shown in a video that a spark can be exothermic or endothermic.

Have you written something about this phenomenon in the book? If not, are you planning to write about it?