What should i build??

[Unite]

hi all i watched all the (energy for the vacuum doc) read almost everything at free-energy-info and understood a good portion of it i totally believe in many of the devices it make's sense. i have a tremendous drive to start working on cop> devices and help spread it to everyone i possibly can.(cus i believe free energy can lead to a free world and that's awesome, i want to be apart of that) anyway when i started thinking about what i wanted to build first, well lets just say i ended up in-depth-ly searching the net for hours not realizing that and gave myself a headache and got no closer to deciding a good first step http://www.energeticforum.com/images/smilies/wall.gif lol

so here are my questions

what is easy to build to get my foot in the door while showing a cop>?

what device would you recommend to power a home or a good portion of a home?

i want to know which device is one of the easier ones to build and get good power out of because after i finish it im going to want to then be able to show case it to people and be able to have them build it so simplicity is important just to get the ball rolling to help people that's my goal. also probably would be best to have it a self starter because some people's attention span cant pay attention to battery's also easier to prove cop> if it runs itself while running other things.

i appreciate any knowledge/advice anyone can give that can answer my question's http://www.energeticforum.com/images/smilies/thanks.gif

LETS BUILD A BETTER WORLD http://www.energeticforum.com/images.../peaceflag.gif

[Bizzy]

hi all i watched all the (energy for the vacuum doc) read almost everything at free-energy-info and understood a good portion of it i totally believe in many of the devices it make's sense. i have a tremendous drive to start working on cop> devices and help spread it to everyone i possibly can.(cus i believe free energy can lead to a free world and that's awesome, i want to be apart of that) anyway when i started thinking about what i wanted to build first, well lets just say i ended up in-depth-ly searching the net for hours not realizing that and gave myself a headache and got no closer to deciding a good first step http://www.energeticforum.com/images/smilies/wall.gif lol

so here are my questions

what is easy to build to get my foot in the door while showing a cop>?

what device would you recommend to power a home or a good portion of a home?

i want to know which device is one of the easier ones to build and get good power out of because after i finish it im going to want to then be able to show case it to people and be able to have them build it so simplicity is important just to get the ball rolling to help people that's my goal. also probably would be best to have it a self starter because some people's attention span cant pay attention to battery's also easier to prove cop> if it runs itself while running other things.

i appreciate any knowledge/advice anyone can give that can answer my question's http://www.energeticforum.com/images/smilies/thanks.gif

LETS BUILD A BETTER WORLD http://www.energeticforum.com/images.../peaceflag.gif

Hi Welcome

That is a great question! Unfortunately there is no easy answer.
It depends on your abilities your desires what you want to accomplish not to mention money. There are some really smart folks here who make things look easy, and I honestly wish I could follow some of thier logic but cant always...

Watch and read what people say and ask lost of questions! these folks are very freindly and helpful.
In the end you will be inspired to something to which will suit your abilities and needs.
I hope that helps
Bizzy

[Neight]

I started with an SSG. it wont run a house or anything, but it's fairly easy to pick up and start building. there are a lot of people who have built them to help with questions and problems you might run into, and it's a great way to start learning the principals that will take you on to bigger and better things.
most of the components are easy to find and not too expensive.
it also gives you something you can take meter readings and (if you have a oscilloscope) scope shots of, to see whats going on.
also, there are a lot of variations you can do with an SSG once you have one built that can take you on to more in-depth builds (adding coils, or using multi-filer coils)
there really is an overwhelming amount of info on this forum for different devices, at varying degrees of difficulty, so as Bizzy said, check around and see what peaks your interest, and move on from there
good luck and most of all HAVE FUN! it's a very interesting way to spend your time, and is very rewarding when you get something working the first time

N8

[Unite]

thank you both for the quick reply's i was think of doing Imhotep ssg fan based on ssg Bedini as a start just to get my feet wet and recharge any dead batteries grateful for your answers and keep them coming im sure there's a lot of people with the same question as me.

Just thought of something new also anyone that knows where to find build log's,plans for any device,step by step guide like Imhotep(http://www.energeticforum.com/renewa...-must-see.html) if there are more plz post them, maybe eventually create a database or archive thingy for now lets just use this thread thank you i guess im going to radio shack to do the ssg but if anyone's got any other ideas plz post them

also iv got good all around skills not to electrical board experienced although if i can see the circuit i can build it as i see it but ill probably not understand it all, as far as money goes im not unwilling to go about 500$ deep for my first project if it seems worthwhile but lets try and take the less is more approach like Buckminster Fuller would say

[Bizzy]

thank you both for the quick reply's i was think of doing Imhotep ssg fan based on ssg Bedini as a start just to get my feet wet and recharge any dead batteries grateful for your answers and keep them coming im sure there's a lot of people with the same question as me.

Just thought of something new also anyone that knows where to find build log's,plans for any device,step by step guide like Imhotep(http://www.energeticforum.com/renewa...-must-see.html) if there are more plz post them, maybe eventually create a database or archive thingy for now lets just use this thread thank you i guess im going to radio shack to do the ssg but if anyone's got any other ideas plz post them

also iv got good all around skills not to electrical board experienced although if i can see the circuit i can build it as i see it but ill probably not understand it all, as far as money goes im not unwilling to go about 500$ deep for my first project if it seems worthwhile but lets try and take the less is more approach like Buckminster Fuller would say

Some of these threads are enmorous with lots of information. So it may be best to inquire directly on that respective thread for any plans or kits etc.
like I said feel free to ask anything and everything. These folks on this site are great.
Bizzy

[wrtner]

...I read almost everything at free-energy-info...

Did you read Chapter 16? It is relatively new.
Paul-R

[Unite]

yup i read it thanks for the advice. i believe one of the members pointed it out to me correctly im just going to have to pick one which gets my interest. i know eventually im gonna want to build a Stanly Meyers water cell i have this great idea that i could use it as a torch to mold glass for other lab experiments special glass pieces and when im not making glass maybe power a modified generator/multifunctionality i believe is an advantage. building the tool's for what will become my lab/workshop. i think i know what im gonna do.
A big out to the community if i stumble upon anything i find useful ill make a thread thanks all

[shawnnweed]

yup i read it thanks for the advice. i believe one of the members pointed it out to me correctly im just going to have to pick one which gets my interest. i know eventually im gonna want to build a Stanly Meyers water cell i have this great idea that i could use it as a torch to mold glass for other lab experiments special glass pieces and when im not making glass maybe power a modified generator/multifunctionality i believe is an advantage. building the tool's for what will become my lab/workshop. i think i know what im gonna do.
A big out to the community if i stumble upon anything i find useful ill make a thread thanks all

I tried to point out the means to an OU device that could potentially put out great amounts of energy but was more or less laughed at due to the fact that no one wanted to take the time to understand it. If you are willing to spend a little you could build a working model for about$1,200. I know it is not exactly cheap but it should theoretically work. The name of the thread is 'The challenge...perpetual energy'. I'm always open for discussion if you take me seriously. And yes, I am attempting to build a working model when I acquire the necessary funds.