Russian website on New innovative energy

[MonsieurM]

found this website on new innovative energy producing devices from Russia:

(i'd suggest to use google chrome it does automatic translation )

Îáçîð íîâûõ òåõíîëîãèé àêàäåìèêà Äóäûøåâà*-*Íîâåéøèå ýêîëîãè÷åñêèå è ýíåðãåòè÷åñêèå òåõíîëîãèè

Vortex fuel injector
Simply swirl the device is designed to save fuel injector of any internal combustion engine. Installed between the injector nozzle and the engine intake manifold. Used to vortex mixing and preparation of a homogeneous fuel mixture, which completely burned in the engine chamber. As a consequence, there is a significant savings of gasoline, increase capacity and reduce exhaust emissions engine.

Legend:

1 intake manifold injection
2 inlet valve engine
3 vortex nozzle liners
4 swirling jet (fuel-air)
5 knurled sleeve swirl injector
6 connection for air supply and water
7 Electrical connector standard fuel injector
8 standard injector fuel injector

-------

Magnetic spark to the rotation of the electric arc
The basis of the magnetic effect of rotation of the candles put an electric arc in a magnetic field. This candle-plazmotoron effectively vozplamenyaet any fuel mix, even with low-grade gasoline. Suitable for all gasoline and auto injector.

----------

Anomalous energy sources and low-cost electric lighting
We offer on the basis of the Tesla transformer unique efficient sources of energy and cost-effective light sources. The photo shows the effect of the glow of incandescent and fluorescent lamps near the Tesla transformer with minimum power consumption of the network that the transformer. We are looking for investors and partners.

-----------

The vacuum tube as a source of gratuitous power
Valery Dudyshev solve the mystery of Nikola Tesla about his source of power for its electric car!
maturing energy revolution in the field of alternative energy...
...Nikola Tesla actually demonstrated in fuel-free electric car in 1931 in Buffalo (USA). Electricity to the motor car came to a mysterious box with radio tubes. But until now, the mystery is the source of electricity for the electric car remains unsolved!

The key is to get electricity directly from the conventional tube triode pentode-in unusual modes of their operation. It is only necessary to provide the explosive electron emission from its cathode. As a result of the triode vacuum tube can be obtained from the electrical load attached to it in parallel - so much power - what we want (well within reason of course: for example with an output power 5-10 kW). Explosive electron emission - used in this invention is the discovery of Academician of the Month. - Is achieved in the triode fed to the control grid of the triode by a series of short duration but high-voltage high-voltage pulses.

Explosive electron emission from the cathode surface leads to the formation of an avalanche of electrons accelerated by a control grid and anode fall in the triode
As a result, this avalanche of electrons from the anode goes to the electrical load, and through it again to the anode of the transistor. Here and there, and supported by the gratuitous electric current in the circuit "triode - the load". In other words in this mode, the usual triode vacuum tube with strong e-mail. field on the control grid becomes gratuitous source of electricity.

Calculations show that the usual triode vacuum tube evacuated to such a mode of operation, provides a powerful electron emission in vacuum-tube triode and after some work, get the transistor from the usual triode tube free electricity, and cooling the cathode and anode - with a radio tubes up to 10 kilowatts - that's such miracles!

Ritsionalnym very technical solution is a combination of resonant Tesla transformer with a vacuum tube. In this case, the explosive electron from the cathode emessiya vakuumery lamp is provided by the transformer Tesla.

Photo 3 Powerful field emission from the output transformer Tesla (below)

http://new-energy21.ru/img/tr_tesla_6.gif

there is more on the website, enjoy

Note: Dudysheva is a name that keeps coming up in the webstie googled him but all i could come up with are russian websites...worth checking him out

Dudishev D. Valery was born in 1948 year in the family of servants in Samara on the bank of the Volga River. He finished school with gold medal & graduated Technical University & postgraduate studies with red diploma with specialty of electrician. He defended Candidate of Science on theme «Autonomous electric power industry» in St. Petersburg(CIAP) – in 1987 year & and defended doctoral thesis on secret theme « Autonomous electric power industry of special installations».

Biography of the scientist-inventor of Academician Dudyshev V.D.*-*Íîâåéøèå ýêîëîãè÷åñêèå è ýíåðãåòè÷åñêèå òåõíîëîãèè

[StweenyA]

impulse

Thanks for the post.

I really think the tesla transformer is the way to go.

When tesla created it, he viewed his high frequency alternating devices as failed projects. (however they did lead up to it, so I don't fully agree...)
source ("Peter A Lindermann - Free Energy Secrets of Cold Electricity")

But is that not indication in itself that we should be pursuing this impulse technology?
Has anybody replicated tesla's magnifying transformer? (like this russian seems to be doing)

[dingo]

On that injector swirler mod...is that incoming air at #6 ? and is that pumped or exhaust-fed ? Does it have to be timed with the injector pulse ?

i DO like the idea

[Michael John Nunnerley]

Nice post, thanks

Mike

[occy30]

Sign me up. Where can I buy these

[MonsieurM]

On that injector swirler mod...is that incoming air at #6 ? and is that pumped or exhaust-fed ? Does it have to be timed with the injector pulse ?

i DO like the idea

6 connection for air supply and water

[MonsieurM]

I like to find similitude in devices created for different purposes but using the same principle to function
sometimes it helps in understanding how a device works
for instance:

Electroflame contactless technology extinguishing
Global warming of the planet increases, and as a consequence, increases pozharoopastnost arid regions of the planet. Recent large-scale fires in Australia fully confirm the severity of this global problem.
As the tragic events of huge fires in Australia recently, all the old fire fighting (water, foam, etc.) do not allow to effectively fight a fire burning a large area and high intensity, especially during strong winds. This problem can be efficiently solved with the help of a fundamentally new technology electroflame fighting fires.

The essence of technology:
The technology used in the electric field of certain parameters, which allows you to instantly put out any fire.

The design of the devices
Structurally, the new fire-fighting is an electrical device comprising an electrical generator of low power, high voltage transformer, the drive of electric charges and telescopic rod (ground unit) or cable (the helicopter) with metal, filigree, mesh frame, unfolding on the principle of an umbrella.

------
and

French Patent # 565,395
Combined Apparatus for Capture of Atmospheric Electric Currents with Immediate Implementation (i think it is Justin CHRISTOFLEAU's invention see:http://www.energeticforum.com/agricu...o-culture.html )

Atmospheric Electricity Collection Patents

http://www.rexresearch.com/atmoselx/565-1.jpg

notice the similar head to emit (in the Russian invention) and to receive (in Justin CHRISTOFLEAU's invention )