Harvesting Energy From the Sun Using Crystals

[MonsieurM]

Yes the cone coil should be made to the specs of the golden ratio, I used a funnel that I had, it should work for experimentation but in the final version it needs to be made in the golden ratio.

Do not overlook the size of your water container either, if you want an optimized ice vortex...

besides you want it to work both ways like a Tesla Coil as an emitter and a receiver...you need the vortex coil to be in perfect resonance with the ice column

[Dave45]

The A vector field is purely electrical, the reason I know this is because it cut through the ice.
The lines in the ice were cracks, the electrical field couldnt flow through the pure ice so it cut lines, cracks.
So Im going to use an electrolyte to get it to conduct, I'll be using KOH.
Here's the setup I used before

[Dave45]

I made this cell with pvc, if you heat pvc with a heat gun it gets very flexible, but it could also be done using boiling water Im sure.
Dave

[Dave45]

Do not overlook the size of your water container either, if you want an optimized ice vortex...

besides you want it to work both ways like a Tesla Coil as an emitter and a receiver...you need the vortex coil to be in perfect resonance with the ice column

I agree, for optimal performance

[Dave45]

MM Im going to try the Toroid again using ac this time

[MonsieurM]

MM Im going to try the Toroid again using ac this time

I like the way you are going, the A field will normally leave its mark on the inside of the toroid if it is an iced core

the only difficulty i see, would be to retrieve the ice

[Dave45]

I like the way you are going, the A field will normally leave its mark on the inside of the toroid if it is an iced core

the only difficulty i see, would be to retrieve the ice

If you look at the pic you can see I have aluminum electrodes in the ice, we should be able to tap the A vector field there.

[Dave45]

This is a much simpler setup, and as Stanley Meyer said keep it simple

[MonsieurM]

just wanted to add this little bit of info i found...If you have not watched this vid, you should (the dan winter water vortexer enhances the properties of water and it is the same you are doing with emf: principle of mentalism "all is vibe" )

Now a Caduceus is a sort of bifilar coil, just coiled in a solenoid instead of
a flat spiral, and the two "sub-coils" wired slightly differently...

the vid:
Fist Fights With Physicists - The Caduceus Coil, Helical Flow and the Evidence for Free Energy ☤ - YouTube

[Dave45]

In a solenoid the magnetic field runs in the ferrite core, and the A vector field surrounds the core
In a toroid the A vector field runs in the ferrite core and the magnetic field surrounds the core
This is a direct tap to the either I think its supposed to be spelled aither not sure,

[Dave45]

just wanted to add this little bit of info i found...If you have not watched this vid, you should (the dan winter water vortexer enhances the properties of water and it is the same you are doing with emf: principle of mentalism "all is vibe" )






the vid:
Fist Fights With Physicists - The Caduceus Coil, Helical Flow and the Evidence for Free Energy ☤ - YouTube

very interesting vid

[MonsieurM]

The picture (2nd column 2nd row) is probably what occurs inside the toroid

[Dave45]

In a solenoid the magnetic field runs in the ferrite core, and the A vector field surrounds the core
In a toroid the A vector field runs in the ferrite core and the magnetic field surrounds the core
This is a direct tap to the either I think its supposed to be spelled aither not sure,

Please dont think Im using ferrite, I used ferrite as a example in this post.
Use ice

[Dave45]

I agree

The picture (2nd column 2nd row) is probably what occurs inside the toroid

[MonsieurM]

Please dont think Im using ferrite, I used ferrite as a example in this post.
Use ice

this is for safety concern