Peter Daysh Davey Water Heater Query

[RAMSET]

Save your Scope and generator

S
We'll get this done! I will help also with the finance,no matter how this ends up.......................

Chet

[Slovenia]

Thanks

Hi Chet,

Thanks. I appreciate all your help.

Best Regards,
Slovenia

S
We'll get this done! I will help also with the finance,no matter how this ends up.......................

Chet

[MonsieurM]

I have a lot of Power1 HHO Experiment parts for sale. I have three large pond foggers with one power supply and a powerful 40 KHz piezo vibration module. I need to raise some money quickly so that I can do some more intense things with this current project, including some help to Mr. "C". If someone in continental US would like these items, I'll make them a special deal and sell the previously mentioned items as a package. The powerful 40 KHz piezo module cost me $38 by itself. I have a lot of other stuff too including some heavy duty equipment necessary for the Power1 project. I got side tracked off the Power1 project and never got back to it. Now I'm really heavy into this project and need to scrape up some funds as soon as I can and the only way I know to do this is by selling off some of my experiment/project stuff.

I have an oscilloscope; really nice as new function signal generator; hot plate with magnetic stirring; and zinc oxide in unopened bag.

I don't want to ship outside continental US.

do you mind if i post this in my thread, might bring in more interested buyers

and good luck

[boguslaw]

boguslaw
sometimes you talk about antennas , and how they can bring in extra
energy?
Like this??
{from Shokac at OU... TK thread]

Chaos I

The Chaotic Circuit I

I know this is off topic I just want your opinion!
Thank you
Chet

Chet

It might be that can is antenna. Interesting thing.Maybe, just maybe there is arcing between ring and can .... so overall picture then looks like Tesla transmitter ?! With a surface of can being rather nice capacitance it could be it accumulate amps and heat can by eddy currents. Very high frequency required but everything is possible.Assuming 160mm length and 1/4 wavelength it is then 64cm wave or around 468 Mhz....
What I learned from Tesla and old patents is rather strange forms or devices similar to ancient artefacts.

I'm working hard to get experimental device test. Almost impossible to mount this metal sheet ring with so small gap to can :-( ! We need to find out how can it be mounted by "hand work" (using only simple tools)

[Slovenia]

Mounting Ring

Hi Boguslaw,

I studied long and hard too with regard to mounting the ring. I finally came up with the method I used, and I think it's the easiest method out there. It's easy to make with hand tools too. I have some good machine tools, but I like to make things the easy way first if possible for prototype. Have another look at my bolt mounting application for the ring. That's the easiest thing I could come up with and I was asking a much higher authority than myself. I give God the glory.

Best Regards,
Slovenia

I'm working hard to get experimental device test. Almost impossible to mount this metal sheet ring with so small gap to can :-( ! We need to find out how can it be mounted by "hand work" (using only simple tools)

[RAMSET]

That works for me!!!!!

Thanks S

There is beauty in simplicity!!

@boguslaw
Thank you

Chet

[cornfused]

Chet & Slovenia,
I haven't forgot or gave up, just haven't had time. Won't be home until late again tonight. Probably won't work on it again till Friday. I did find a site called stereo test sounds that have more choices of freq. Like 1 Hz.steps, so I will be trying to nail down more precisely where my can is ringing. Chet the clostest can I could find was 20 oz red bull. I've got it cut down to just under 7 1/4" and nail will vibrate at 60 Hz., but I think I can get it closer and get more vibration.
Cheers, Jason

[Slovenia]

Yes

Yes, that would be fine. Thanks!!

do you mind if i post this in my thread, might bring in more interested buyers

and good luck

[Slovenia]

Thansk for Update!!

Thanks for the update Jason!!

Chet & Slovenia,
I haven't forgot or gave up, just haven't had time. Won't be home until late again tonight. Probably won't work on it again till Friday. I did find a site called stereo test sounds that have more choices of freq. Like 1 Hz.steps, so I will be trying to nail down more precisely where my can is ringing. Chet the clostest can I could find was 20 oz red bull. I've got it cut down to just under 7 1/4" and nail will vibrate at 60 Hz., but I think I can get it closer and get more vibration.
Cheers, Jason

[boguslaw]

Slovenia

Can you post again link to your ring mounting method picture ? I can't find it.
Also , there is important question which if I good remember was not asked : what is the original material and shape of container and if it has any sound properties ? PVC tube is cheap and nice for experimental device but if the container should ring too or reflect sound waves then only good metal chamber can be resonant cavity.
I'm asking because I use SS pot as a container and I found it acts like a big bell when hit by anything stiff.

[Slovenia]

Ring Mounting Pics

Hi Boguslaw,

Glad to help you.

Refer to #434 page 15 for pics of my internal parts to my test boiler.

Refer to post #400 for pics of my test boiler on page 14.

Post #423 & #424 have pics of my boiler in action on page 15.

I took down my pdf because I shared some information I didn't have permission to share. Mr. "C" saw it and was nice about it but never the less, I did not have permission to share.

Best Regards,
Slovenia

Slovenia

Can you post again link to your ring mounting method picture ? I can't find it.
Also , there is important question which if I good remember was not asked : what is the original material and shape of container and if it has any sound properties ? PVC tube is cheap and nice for experimental device but if the container should ring too or reflect sound waves then only good metal chamber can be resonant cavity.
I'm asking because I use SS pot as a container and I found it acts like a big bell when hit by anything stiff.

[RAMSET]

Quest for the can

S
I tried a few places today for the polish 1/2 liter
They only had the smaller size ,Tomorrow I have a couple leeds to try.

I am determined to get a can in the water before going out of town again next week.................
DETERMINED!!
Chet

[boguslaw]

Hi Boguslaw,

Glad to help you.

Refer to #434 page 15 for pics of my internal parts to my test boiler.

Refer to post #400 for pics of my test boiler on page 14.

Post #423 & #424 have pics of my boiler in action on page 15.

I took down my pdf because I shared some information I didn't have permission to share. Mr. "C" saw it and was nice about it but never the less, I did not have permission to share.

Best Regards,
Slovenia

Slovenia

Thank You !

I have a doubt if we can replicate this device without detailed information from Mr "C". Is he willing to say what kind of material is container composed of ? I saw that your tried with clear plastic tube container and with can in standing position. Schematic suggest that can should be in horizontal position. That all need to be asked and cleared up by Mr "C". Without his help this is pointless.

[Slovenia]

Can in Water

That's Great!! I'm impressed. Your schedule is very hectic indeed.

S
I tried a few places today for the polish 1/2 liter
They only had the smaller size ,Tomorrow I have a couple leeds to try.

I am determined to get a can in the water before going out of town again next week.................
DETERMINED!!
Chet

[Slovenia]

Container??

Hi Boguslaw,

Container??
Yes, the container is pvc plastic sewer pipe. Also, it doesn't matter whether the container is vertical or horizontal. My test apparatus/container was just for show. That's why I used clear acrylic with an open end. That's why I had mine standing vertical so that people could see the activity at the ring and can and also show what was going on with respect to the whole side of the can.

Arcing & Sparking?? (Previous Question)
I saw no arcing or sparks while operating my test boiler either. There was a lot of activity between the ring and the can though. The water was swirling and bubbling and very active indeed.

Thanks for your contributions to this thread. You are very sharp and all your contributions are much appreciated!!

Best Regards,
Slovenia

Slovenia

Thank You !

I have a doubt if we can replicate this device without detailed information from Mr "C". Is he willing to say what kind of material is container composed of ? I saw that your tried with clear plastic tube container and with can in standing position. Schematic suggest that can should be in horizontal position. That all need to be asked and cleared up by Mr "C". Without his help this is pointless.