Peter Daysh Davey Water Heater Query

[PhysicsProf]

When someone says that neutrinos are what drive the device, I ask -- what experiments have been done to substantiate or test this hypothesis? Neutrinos are extremely penetrating and react with matter very little, but if there are EXPERIMENTS to back it up, I'm all ears, ready to listen!

If we are to build an operational device, we must be guided by experimental evidence. We need careful measurements of input energy and output energy, and to learn from experiment what parameters affect the ratio Eout/Ein.

And if we are to build replications, which is the core of good science, we need details of how to build a successful working device.

I thank Prof. Savic in particular for sharing numerous details of this device and being willing to do experiments.

[boguslaw]

Try this

[ATTACH]9983[/ATTACH]

Two transformers of 120 or 240V to 12v, the high voltage side is the low voltage control side, the diodes should be to handle the voltage and current.
The low voltage DC can be a 9v battery such as PP3

Mike

Can you describe it further ? I'm ready to try to build this magnetic amplifier to regulate current from my power socket into sonic boiler.I have a yoke ferrite core from dismounted from old pc monitor.Would it be good one for it ? I know that the essence is to have proper winding directions so AC voltage do not occur on 9V side, can you post any link to successful building of such magnetic amplifier with instructions ?

[RAMSET]

Japanese Neutrino researcher

Steve
I have been told that the Neutrino "Lingo" that has been shared here
has also been seen on the internet from a Japanese researcher,with experimental data to back up the claims ...while it was not word for word
in line with Professor Savics Explanation ,apparently there have been experiments done along these lines Albeit controversial .

One other thing this same researcher was working on a Cylindrical Capacitor
That showed some anomalies.

I have looked but cannot find this ?{yet}

I agree with your statement on Protocol,And Knowing that your Colleague From Serbia Has brought to us something no one has shown before,[in our lifetime]
I would afford him the respect for his Theory until such time [if ever]
it can be corrected by science.

He is not alone in his Theorem ,and Neutrinos are far from being understood!

Thats all I have to say about that
Except
Thank you Professor Savic!!

[Cherryman]

Steve
I have been told that the Neutrino "Lingo" that has been shared here
has also been seen on the internet from a Japanese researcher,with experimental data to back up the claims ......

I Have seen that technique before, I will try to find it.

I t was a Japanese professor if I remember correctly,...

Peace.

Edit: Does anyone know that side archiving all those "free energy" video's ?

[wrtner]

When someone says that neutrinos...

...And if we are to build replications, which is the core of good
science, we need details of how to build a successful
working device.

Yes, but we don't actually need to know how it works. We can
manage with detailed build instructions.

The "how" can come later.

[Slovenia]

Mr. "C" Reply to Dr. Jones (PhysicsProf)

Dear prof.Jones,
About netrinima Teslionima or how fast I learned traveling, not at my college (I was in physics at first year) but directly from Tesla's work which he proved to examine Nobel Laureate Prof. Academician. Dr. Konstantin Mail from Germany and who was the first replicated and explained the wireless transport of energy resonance.
He says that the neutrino is fast and constant speed of light to their lowest possible speed.
Tesla is a calculation of the speed and said it was 1:52 times the speed vetlosti. Andthat his rezonanatni devices operate on these scalar waves.
These are not electromagnetically waves and does not decrease with the square of the distance as the Hertzian waves.
Greetings from the nuclear lobby prof.Savića from Serbia.

Postscript Serbia is the second country in EVOP nuclear particle accelerator was and is inVinca, near Belgrade, and it was led by the late Academician prof.Dr.Pavle Savic, who worked with Maria and Pierre Curie in France.
Curie die of bone cancer because it is hand carried ore flotation.
It is the first victims of nuclear power in the world.
Nikola Tesla was bitterly fought against nuclear power because they knew what they would bring great evil planet earth and nature that he was very fond.

[daemonbart]

Neutrinos!

Hi,

I think we are talking of this guy??

Dipole (Anti)Gravity, Magnetic Gravity, true Gravitomagnetism

Br D

[daemonbart]

Dont miss!

Physics of Free Energy Device - YouTube



Kind rgds D

[daemonbart]

Teamwork!

Imagine Savic and this Jeong together, Ramset could do the welding, Slovenia and me could dream up some nice suggestions

Everyone here is welcome also

Kind rgds D

[osamaricu_te]

update

Hi all,

I tried the idea Grizli gave, feeding 2 frequencies from my amplifier. So here is what I tested:

1. I have small plates curved in a circle, like a short tube, BUT 1 cm was cut off so it doesnt complete full circle so its not a tube exactly. I like it like that, it makes more dispersed sound.
So I took 4 of them, place them on in each other, very small gap between. Nothing

2. Took tubes, placed them in one another. Nothing

3. Made 4 rings out of a "beer" can, weak repsonse.

4. made 4 plates out of a can again, I used can cause I dont have any other material so thin to vibrate. placed 4 pieces of can arranged as flat plates (well almost). Hmmmmmm, this is giving some nice reply. I put power in them on 2 different frequencies in order, first wire from left channel to first plate, the second to 3rd plate and then other channel to 2nd and 4th plate. As soon as I give power to it, it starts humming. Like powerplant humming :P
Anyway, it is humming, making instant bubbles but its not heating too much and it doesnt respond to change of frequency. In fact, it is giving stronger reply to the frequency that draws more power, nothing else.
BUT I am interested in testing more, so I will try again tomorrow, will use thin REAL plates and arrange them properly.

Will update then.

[RAMSET]

Very Good

Mr.D
Thanks for the history ,The lesson......
And the Smile!!

Good for the soul!

Chet

[osamaricu_te]

who can explain?

This is one thing I dont understand about this sonic boiler idea. So we get an object to resonate on 50Hz. Thing here is, we got it to resonate at 50Hz in AIR. As soon as you put that object in water, its resonance frequency has changed, so I would like someone to explain this if possible?

[RAMSET]

osamaricu_te

Sir
That is an interesting Name you have?
What does that mean??[translation]

?
Your question on Air and water....
I would suspect that is the reason the can has to be made "Razor thin"
So when it gets to the water ...... things still Move?
Just a thought?

Chet

[osamaricu_te]

Sir
Your question on Air and water....
I would suspect that is the reason the can has to be made "Razor thin"
So when it gets to the water ...... things still Move?
Just a thought?

Chet

yes, my thought exactly, but then this would mean we dont have to make it resonate on 50Hz in AIR. We just have to make it thin enough to VIBRATE rather than to resonate.. correct?

[RAMSET]

New people

Sir
With all respect Your handle that you use here seems strange?
I try not to judge a book by its cover .

We are an open source community ,people that come to these pages
I have known most of them a long time ...as does Slovenia.

Persons that share their hard work here have a certain Quality that is usually reflected in how they Speak, Their handles [forum names] ETC
You seem a bit out of line with what I have come to expect from the benevolent men and women that come here to make this world a better place?

A little Off To Me...................

Can you explain your handle [forum name] Please?

Thank you
Chet