TUBE DRIVEN TPU'S The construction zone

[willy96]

hello everyone im new to this site i have worked many years off and on in the TPU reserch

the time has matured to a point where this tech must be used so this will be the last time i will spend in the public eye building my devices

i have started this thred because this is where it is at!

tubes must be used
i have not done much with them yet but we shall do it now !

i have aquired some nice old tv tubes .. and in removeing them from the tv's i do not recall seeing a flyback transformer in the old set's

hummm well so the tubes i have to me seem to be dirrect eather taps

EXTREAM CAUTION MUST BE EMPLOYED WHILE PLAYING WITH THEASE TUBES I ACCEPT NO RESPONCIBILITY FOR YOUR ACTIONS IF YOU HURT YOURSELF IT IS YOUR DOING NOT MINE I PROVIDE INFORMATION FOR LEARNING AND TESTING AND UNDERSTANDING MY DEVICES

~PLAY SAFE ~BE SMART~ STAY ALIVE~
~w~

[Kokomoj0]

tubes must be used

Thats nice

i have not done much with them

Then I guess that makes you the expert.

This is spam by any other definition.

[RAMSET]

Welcome to the forum and thank you.......

Willy
please share whatever you can ,as you say the time grows late!!
I have heard many folks say that tubes are the way to Go!
Some of us have grown weary ,and some still hope for an honest sharing of good info,I am in the Hope category.

Thank you
Chet

[willy96]

Hello old friend chet

well i just got done looking up 1 of many tubes i have in my hand as we speek

here are the specks

DONT HURT YOURSELF!!!!!!

1G3GT Half-Wave High Voltage 30 KV Diode Rectifier Sylvania Electronic Vacuum Tube

30kv half wave rectifer tube 1g3gt 1b1gt
i be diggin this KICK A$$ TUBE ..

w

[citfta]

I am also in the hope category, but if Willy doesn't recognize a flyback when he sees one I have my doubts about his ability to use tubes. I worked on TVs for about 10 years during the days when they were changing over from tubes to solid state. I can assure you all tube type TVs have a flyback and a high voltage rectifier tube.

Willy if you are sincere, post the numbers off the tubes you have and I'll try and find out for you what they were used for in the TV.

Carroll

[willy96]

i picked the tubes out of the old sets with my hands .. there was no flyback as i have seen .. lots of tubes and i have a yoke too from a late 20's - early 30's set so

the tubes that caught my intrest are the ones with the metal hats sticking out the top of the tubes i have 5 of them the tube i posted the spekcs for is 1 of the 5 so its a diode most people would never blow up .. a good place to start 1.5vdc .25amp ... cheep to operate too good for 30kv even 20ma @30 kv is lots of power..

bet it lites bulbs .....

willy

[Farmhand]

Hi Willy, How do you figure TPU stands for "Tesla's Power Unit', I've heard that it
stands for "Toroidal Power Unit".

However I think it should stand for "Tesla's Pretty Unhappy". You should be
more mindful of linking Nikola's name to dubious devices, it seems a lot of
people use his name to try to give legitimacy to things. More respect should
be shown to the work of a man who left us so much. Please link the patent or
drawing or Tesla concept this TPU is supposed to be related to.

Can you show me where there is any reference of or to a TPU in Tesla's work.
Or tell me how a TPU is supposedly related to Telsa ?

What is the principal of operation ? Do you have any schematics ? How does a
TPU work. I have limited Net bandwidth and so I can't just watch any video I
want. I'm interested to know what you're going to do with the tube's ?

I don't see how a rectifier tube will make a TPU, could you give some info on
what the TPU should do ?

Cheers

[willy96]

well nice to meet you farmhand ..

words of advice chill !

you can damm well bet TESLA HIMSELF IS A WEE BIT PISSED!

nevermind how i know ...

here is another tube i have in my belongings
50l6gt/g
here is the speck sheet
class a amp tube
50L6GT datasheet and application note, data sheet, circuit, pdf, cross reference, pinout | Datasheet Archive

w

i have also 1 of thease tubes it is a larger tube with a cap on the top
6DQ6B datasheet and application note, data sheet, circuit, pdf, cross reference, pinout | Datasheet Archive
6dq6b / 6gw6

[Farmhand]

well nice to meet you farmhand ..

words of advice chill !

you can damm well bet TESLA HIMSELF IS A WEE BIT PISSED!

nevermind how i know ...

here is another tube i have in my belongings
50l6gt/g
here is the speck sheet
class a amp tube
50L6GT datasheet and application note, data sheet, circuit, pdf, cross reference, pinout | Datasheet Archive

w

I don't need you're advice, or to chill, we will see what comes of this.

Can you answer the questions or not ? If not don't bother replying to me.

I asked valid questions, I expect an attempt to answer them. Should be easy enough.

Cheers

[RAMSET]

I like you already Willy..............

Tenacious !!

And thick skinned I hope!!
You have our attention!!

Thanks

Chet

[willy96]

I don't need you're advice, or to chill, we will see what comes of this.

Can you answer the questions or not ? If not don't bother replying to me.

I asked valid questions, I expect an attempt to answer them. Should be easy enough.

Cheers

im gonna refuse to get rude toward you but to EXPECT an ANSWER...
better find your own answers cuz i dont spoon feed anyone!
you must be god!

I BOW TO NO ONE my respect is earned not given thankyou

lets just say my wings are wide .

w

[Dave45]

Hey Willy welcome welcome welcome
Very interesting subject, I agree the current needs to be rectified, have some thoughts on this myself.
Would very much like to hear your thoughts.
Dave

[willy96]

the goal with a tpu is to produce useable power

there many ways this is achived the simplest to understand and put into action is a typical induction motor core powered ac by mains this is an elecent test plaitform ... to understand tpu operations..

simply remove rotor wind upon the steel core a pickup coil to tap the rotating 60hz magnetic feilds


standard motor generation princibles and transformer winding is at play here ...

nothing more ... this proves many things 1st motionless power is possible second you can combine a motor and a generator upon 1 ring utilizing the electromagnetic waves produced from within the device


got your att yet?

w

[willy96]

Hey Willy welcome welcome welcome
Very interesting subject, I agree the current needs to be rectified, have some thoughts on this myself.
Would very much like to hear your thoughts.
Dave

hello dave45

my thoughts when i serched that tube rectifier were wow! i can see paradice by the tube lit lights
aint no dubt about it baby its time to shout it
aint no doubt bout it its OU

1.5 volt heater 1/4 watt! output 30kv
OMG!

could i find a better one ?

W

[Kokomoj0]

the goal with a tpu is to produce useable power

there many ways this is achived the simplest to understand and put into action is a typical induction motor core powered ac by mains this is an elecent test plaitform ... to understand tpu operations..

simply remove rotor wind upon the steel core a pickup coil to tap the rotating 60hz magnetic feilds


standard motor generation princibles and transformer winding is at play here ...

nothing more ... this proves many things 1st motionless power is possible second you can combine a motor and a generator upon 1 ring utilizing the electromagnetic waves produced from within the device


got your att yet?

w

I wont get rude either, but I will request that if a moderator exists on this board they delete anything that looks or can be construed to be tpu related and take that trash back over to the hartiberlins board. He enjoys babysitting and protecting his tpu children from scutiny.


farm, you wont get any answer what so ever except as you can see smart alec childish retorts from these characters because it is purely SPAM and they simply do not have any theory beyond wishful thinking.