Announcement

Collapse
No announcement yet.

My Motors got me to Tap into Radiant Energy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Great, I am glad you liked it...

    Originally posted by ZeropointEnergy View Post
    Hey Ufo,

    I thought that I added that I enjoyed the clip.
    I liked it. I know from making powerpoint presentations the time I placed into editing sections of videos, splicing other frames, text and many hours vanish
    That was basic video editing software, not multiple.

    Maybe I used the wrong terminology with the word "short" and would be more accurate to say either, discharge or switch via the commutator.

    I see this Asymmetrical motor concept just as Tesla desribes (patent 524,426) with the inbalance in the length of the pole pieces cause a magnetic phase difference. Each set of coil pairs will exhibit a time delay in proportion to the core of the coils length and thus create an inbalance of magnetic flux to each coil pair.

    This is the way my visual representation plays out in my head

    Regards
    Zero

    Hey ZPE,

    Thanks!

    Now related to Asymmetry...

    Maybe I used the wrong terminology with the word "short" and would be more accurate to say either, discharge or switch via the commutator.
    That is MUCH BETTER!...Yes, discharge by an additional gate out...

    Now you wrote...

    I see this Asymmetrical motor concept just as Tesla desribes (patent 524,426) with the inbalance in the length of the pole pieces cause a magnetic phase difference. Each set of coil pairs will exhibit a time delay in proportion to the core of the coils length and thus create an inbalance of magnetic flux to each coil pair.
    Nope...You got it "kind" of wrong there...

    Asymmetry DOES NOT refers to the structural, nor the disposition of coils, Nor the length ...BUT, to The Way they Interact between each others.
    Not by "Unbalance" either, my friend...they could be perfectly balanced, and as a matter of fact, an unbalanced electrodynamic machine will never run "even"...or "balanced"...

    Asymmetry refers to an Asymmetrical Interaction, where Pairs or Groups of Coils are NOT aligned TO INTERACT in a "Symmetrical Array"...Capische?

    Symmetrical Interactions mean to "Self Cancelling Magnetic Fields" in a "Symmetrical Fashion"...like Tom Bearden writes...Killing the Dipole in every turn.
    Now whenever you leave that Coil or Dipole free, idling for a few seconds...then you broke the Symmetry...

    I hope you understood now...

    Regards my friend


    Ufopolitics
    Last edited by Ufopolitics; 06-07-2012, 09:45 PM.
    Principles for the Development of a Complete Mind: Study the science of art. Study the art of science. Develop your senses- especially learn how to see. Realize that everything connects to everything else.― Leonardo da Vinci

    Comment


    • But this posts belongs to the other thread...

      Originally posted by Ufopolitics View Post
      Hey ZPE,

      Thanks!

      Now related to Asymmetry...


      That is MUCH BETTER!...Yes, discharge by an additional gate out...

      Now you wrote...



      Nope...You got it "kind" of wrong there...

      Asymmetry DOES NOT refers to the structural, nor the disposition of coils, Nor the length ...BUT, to The Way they Interact between each others.
      Not by "Unbalance" either, my friend...they could be perfectly balanced, and as a matter of fact, an unbalanced electrodynamic machine will never run "even"...or "balanced"...

      Asymmetry refers to an Asymmetrical Interaction, where Pairs or Groups of Coils are NOT aligned TO INTERACT in a "Symmetrical Array"...Capische?

      Symmetrical Interactions mean to "Self Cancelling Magnetic Fields" in a "Symmetrical Fashion"...like Tom Bearden writes...Killing the Dipole in every turn.
      Now whenever you leave that Coil or Dipole free, idling for a few seconds...then you broke the Symmetry...

      I hope you understood now...

      Regards my friend


      Ufopolitics

      Hello ZPE,

      Please could you re-post your comment related to Asymmetry versus Symmetry thread...Thanks, and I will answer there also...

      Thanks!, let's not confuse more the people working on their oscillators here...leave them alone!!....


      Regards


      Ufopolitics
      Principles for the Development of a Complete Mind: Study the science of art. Study the art of science. Develop your senses- especially learn how to see. Realize that everything connects to everything else.― Leonardo da Vinci

      Comment


      • Originally posted by torpex View Post
        @iankoglin
        Schematics need more resolution, costs a bit to see.
        In your lm317 circuit the diodes must be 1N4002, no need to use NTE576, but works also. Diodes NTE576 are for the coil.

        Oscilator circuit:


        Drawing is components side, right? Pinout for the lm339 is correct, pin 2&4-5 and pin 1&6-7.
        I think the + also be wired to lm317 regulated output. Do not use the jumper, pin 5 to ground is incorrect, right?


        The coil looks good

        I do not see the schematic of your 555 circuit.


        G'Day Torpex
        Thankyou for you inspection
        Yes the circuit is from component side also I can see that the jumper is not right and I have corrected it.
        The + is going to the LM317 output of the LM317 via the end of the 50k pot as described in Bob French's diagram

        I have loaded the ammended and clearer circuits here Kogs UFO Photos pictures by Kogs1 - Photobucket

        Thanks a lot
        Kindest Regards Kogs

        Comment


        • beautiful work

          Hello everyone!

          I have been hanging around these passed few days catching up. I must say, ufopolitics, everything that you have learned and given to us is beautiful and I cannot wait to be more involved in it taking root. I should have my oscillator assembled by next weekend so I can begin to participate.

          I also must say, thank you, ufopolitics, for being so patient and clear with everyone, the information has been wonderful.

          I hope I can keep up with some of the skill shown in this thread and bring forward some results, talk with everyone more soon.

          Until then ,
          Matt

          Comment


          • cheap gas for small business

            Usage of alternate energy can best save money and the environment from getting polluted. Among other alternatives solar energy is greatest alternative for saving electricity. It can be used for cooking instead of microwaves, solar cookers help in fast cooking making cheap gas for small business and household use.
            Thanks
            cheap gas for small business
            http://www.loveenergysavings.com/com...siness-gas.asp

            Comment


            • Spam here?!

              Originally posted by Loveenergysavings View Post
              Usage of alternate energy can best save money and the environment from getting polluted. Among other alternatives solar energy is greatest alternative for saving electricity. It can be used for cooking instead of microwaves, solar cookers help in fast cooking making cheap gas for small business and household use.
              Thanks
              cheap gas for small business
              Hey lovenergysavings,

              This is an specific issue thread going on here, NON RELATED posts and much less related to Gas Consumption will not be accepted.
              Please make your own thread and expose your links there.
              Please remove this post here, or I will report it as Spam.

              Appreciate it, Thanks

              Ufopolitics
              Principles for the Development of a Complete Mind: Study the science of art. Study the art of science. Develop your senses- especially learn how to see. Realize that everything connects to everything else.― Leonardo da Vinci

              Comment


              • Hmm.....maybe it's time to provide a tutorial with proved schematics ? Personally I have no spare time to monitor this thread, having more important "job" to be done in spare time.

                Comment


                • Hey Boguslaw...

                  Originally posted by boguslaw View Post
                  Hmm.....maybe it's time to provide a tutorial with proved schematics ? Personally I have no spare time to monitor this thread, having more important "job" to be done in spare time.

                  There is a while never heard from You again!!??

                  What happened?!...did you finally obtained the High Peak very short Voltage levels of oscillations through the Opto isolator circuit to run My Coil set up , As I had suggested before in way back pages?

                  Would like to know your results with my replication Bogus Law...

                  So far I have been "monitoring" this thread...don't you think so?
                  I mean, I can not teach every one that comes in how to put together an oscillator...is written all over and all different color graphics on this thread...all you have to do is read it and solder components...
                  There have been MANY successful replications here...also written all over...


                  Nice to see you back...

                  Regards

                  Ufopolitics
                  Principles for the Development of a Complete Mind: Study the science of art. Study the art of science. Develop your senses- especially learn how to see. Realize that everything connects to everything else.― Leonardo da Vinci

                  Comment


                  • Hi @Ufo,

                    Originally posted by Ufopolitics View Post
                    Hello Torpex,

                    The One I have been showing on videos (Dual Channel Oscillator) is based on a Dual 555 timer that I posted before here...based on a Mosfet check circuit...so far it works fine, the only problems are that the P-Channels I use are not "exactly" a match for the NTE2397's so there is a bit Off sequence in the starting low frequency but Resistance increases (between Positive Source-Positive Drain) till I reach higher freq. levels...
                    The first IC555 originates the frequency and is adjusted just like the old circuit...the second IC 555, creates a "Mirror Image" but in High Side to excite the P-Channels...what I did is from leg 3 of IC1 to Leg 2 (trigger) of IC2...and 3 of IC2 excites P-Channels.

                    The circuit from Mad Scientist based on the LM339 could drive two channels, P and N...easier and more effective...
                    Cinan have a brighter idea to just use N-Channels for both Positive-Negative...but He have not make it yet...(not that I know off)

                    Regards


                    Ufopolitics
                    Thanks Ufo, i remember the circuit with two 555

                    Let's see if Cinan reports its results.


                    Regards
                    http://Cacharreo.com.es/foro

                    Comment


                    • Originally posted by iankoglin View Post
                      G'Day Torpex
                      Thankyou for you inspection
                      Yes the circuit is from component side also I can see that the jumper is not right and I have corrected it.
                      The + is going to the LM317 output of the LM317 via the end of the 50k pot as described in Bob French's diagram

                      I have loaded the ammended and clearer circuits here Kogs UFO Photos pictures by Kogs1 - Photobucket

                      Thanks a lot
                      Kindest Regards Kogs
                      Hi @Kogs

                      It seems to me right and the pics are now well.

                      Waiting for your test, good luck with your great coil


                      Regards
                      http://Cacharreo.com.es/foro

                      Comment


                      • Hi all,

                        I've been testing with other types of small inductors:



                        Power source only 12v/7A
                        Eco bulb 9w/230v
                        Raising the frequency

                        All inductors lit the bulb.
                        In efficiency, some better than others, but some about 80-83%.

                        Some fun, but without burning any component


                        Regards
                        http://Cacharreo.com.es/foro

                        Comment


                        • Just be careful testing...

                          Originally posted by torpex View Post
                          Hi all,

                          I've been testing with other types of small inductors:



                          Power source only 12v/7A
                          Eco bulb 9w/230v
                          Raising the frequency

                          All inductors lit the bulb.
                          In efficiency, some better than others, but some about 80-83%.

                          Some fun, but without burning any component




                          Hey Torpex,

                          Glad you are obtaining good results...Now, be carefull with Inductors...some have very low resistance, almost zero...those will blow your MOSFET's very fast...
                          On the other hand, how are the Toroid s make it?
                          I understand they have magnetic field within core...not expanded outwards...so, do they behave same as your bifilar cylindrical coil ?

                          Thanks for posting it here

                          Regards


                          Ufopolitics
                          Principles for the Development of a Complete Mind: Study the science of art. Study the art of science. Develop your senses- especially learn how to see. Realize that everything connects to everything else.― Leonardo da Vinci

                          Comment


                          • Originally posted by Ufopolitics View Post
                            There is a while never heard from You again!!??

                            What happened?!...did you finally obtained the High Peak very short Voltage levels of oscillations through the Opto isolator circuit to run My Coil set up , As I had suggested before in way back pages?

                            Would like to know your results with my replication Bogus Law...

                            So far I have been "monitoring" this thread...don't you think so?
                            I mean, I can not teach every one that comes in how to put together an oscillator...is written all over and all different color graphics on this thread...all you have to do is read it and solder components...
                            There have been MANY successful replications here...also written all over...


                            Nice to see you back...

                            Regards

                            Ufopolitics
                            Thank you Ufopolitics

                            No, unfortunately I'm very slow in manual works and still have a few other projects to finish. Sorry. I just can't hold on so much posts is here and there (in other threads) to cope with all information.
                            I have much respect to your work but I desperately need to workout own and highly usable solution for resonant electric heater to heat my home and later to get a job related to improvement in this area. This is somehow a bit related I think...anyway I will return back to your topic once I will finish my task. That's why I asked for tutorial pdf to fast return to the actual research here. Something with proved circuit schematics and described experiments with explanations. No hurry however.Just an idea.
                            The circuit with optoisolator proved to be much more difficult to get working, I have to re-think it and prepare more data and analysis before actual building.


                            Btw Boguslaw is not BOGUS LAW by my name which means in Polish something similar to "praise the Lord"

                            Comment


                            • Hello Boguslaw...

                              Originally posted by boguslaw View Post
                              Thank you Ufopolitics

                              No, unfortunately I'm very slow in manual works and still have a few other projects to finish. Sorry. I just can't hold on so much posts is here and there (in other threads) to cope with all information.
                              I have much respect to your work but I desperately need to workout own and highly usable solution for resonant electric heater to heat my home and later to get a job related to improvement in this area. This is somehow a bit related I think...anyway I will return back to your topic once I will finish my task. That's why I asked for tutorial pdf to fast return to the actual research here. Something with proved circuit schematics and described experiments with explanations. No hurry however.Just an idea.
                              The circuit with optoisolator proved to be much more difficult to get working, I have to re-think it and prepare more data and analysis before actual building.


                              Btw Boguslaw is not BOGUS LAW by my name which means in Polish something similar to "praise the Lord"



                              Hello Boguslaw,


                              Ok, no more "Bogus Law"...promise!...but Boguslaw...sorry about that!


                              Hey, Rose Mary Ainslie have a 555 circuit for a heater element...it is in Mr. Patrick Kelly's site...it runs up to 50KHz...that is unbelievable performance for a 555 IC to reach!!

                              I have it also the schematic somewhere...it uses two sources 12-24 V...

                              But, the best heater element you could buy would be made out of Carbon Fibers...
                              They sell that CF heater cable already insulated I believe...I have been after it for a while...

                              Related to Opto-isolators, I believe we have an "Electronic Brain" here somewhere...(Cinan)...but he's been out for a while, I believe had to go on a trip or something like...

                              Making a pdf File is a HECK of an idea!!...Thanks!!


                              Regards Boguslaw


                              Ufopolitics
                              Principles for the Development of a Complete Mind: Study the science of art. Study the art of science. Develop your senses- especially learn how to see. Realize that everything connects to everything else.― Leonardo da Vinci

                              Comment


                              • Kogs drawings

                                Originally posted by iankoglin View Post
                                G'Day UFO, Bob,Dana and All others
                                I have my circuit finished (almost) the Regulator is working Ok the 555 oscillator does not seem to work I have checked my circuit and I think I have a Pos wire onto the coils wrong/missing I have to check it out still.
                                I built the Oscillator on a 555 PCB I purchased it was very hard to fit the components on and it's hard for me to check it out also the 555 gets hot, I need to build another PCB one that is easier to fit the components on.

                                I have some pics on Photo bucket of my setup and the PCB drawing I intend to use (its Bob's LM339 Oscillator )
                                Please if someone could check it out for me they are here.
                                Kogs UFO Photos pictures by Kogs1 - Photobucket

                                the LM339's I have purchased here they are the same as the top ones above
                                http://docs-asia.electrocomponents.c...6b8002cf9a.pdf

                                Please Are these LM339's the correct pin?

                                I have been following all the posts and appreciate what I am learning.

                                I am chomping at the bit to have mine running.
                                Kindest regards Kogs
                                Kogs,

                                The pinout of the top drawing is right. The bottom one is different.

                                I'm trying to get things to work. I have been trying for a week to use a NPN in place of MOSFETs while I'm waiting for them to arrive.

                                Bob

                                Comment

                                Working...
                                X