My Motors got me to Tap into Radiant Energy

[Ufopolitics]

Hello Dear Turbo Runner...

Wow so this this is an actual free energy OU device that can run itself. I have been looking all over the place thinking I found such a device and at the last second I realize its all a lie, but finally an actual real deal device is here! Are you or do you have instructions on how to build an exact replica?

Hello dear Turbo Runner and

Please "turn off the "Turbo" for a bit... , We know you are excited...

Yes, unfortunately it was all a lie...conceived about One Hundred and Thirty Two years ago...

There is no other way to get to know this set-up, but to read the Thread...not all the "Noises" from skeptics and pessimists , please skip those...but the specific documentation...
There are new improvements being done in the area of the Oscillators (Electronics)...as I will be opening soon another thread with details about Motors-Generators Structures...but the main principle is all here...

The Secret is in the Electromagnetic Asymmetrical Systems...not taught in any EE School...so I recommend to review that Thread as well, it will give you the inside into our Historical deception...
Asymmetrical Systems are Open to our Space, they get Energy from the Vacuum, the Aether and the Magnetic Fields around...based on Magnetic Resonance or Feedback...The Thermodynamic Laws and the Energy Conservation Laws simply do not apply to this Systems...

Good luck and happy reading...

Regards


Ufopolitics

[larryross]

Hello KEhYo77




May I ask which set up, Aviso's or Mine?

Good video, you have a point there, shorting out the Coil...However, I do not agree that is "the secret" of what we are all looking for here, or doing through my set-up.
The Mosfet's are NOT shorting out the Coil (at least in my set-up), But, MOSFET's are just switching the Coil On-Off, that is it.

By shorting out the Coil, you will brake the Symmetry, and gain a sudden surge or rush of energy detained in those shorting times, however, the system will draw back -after surge- more than it outputted at surge, to bring back its equilibrium...that's all...no big gain, and not collecting from the "medium" either...
The "Secret" exist in letting that Coil "idle" by itself alone, OPEN, no Input at all, but being able to collect those "Off Times" currents, like we are all doing here with my set-up.

That Motor Netica is running with My Set-Up, is doing it with just this "extra currents" at Off Times...it is what Physics call C EMF or Back EMF in a Symmetric brushed Motor...Now, here are not present the Two Opposed Currents, but just one...If We could look at the brushes inside that motor (we can not see it 'cause the motor is closed, I have done it with open motor set up) will notice it has little to almost no arcing in its commutator-brushes contacts. The Motor should also be running much cooler than with normal Hot electricity.

Now, remember this Set-Up of mine, came out of a previous existing Motor-Generator arrangement.

Now, this is not the "end" of this set-up, just adding an extra coil to a brushed motor and getting a great performance...we are still loosing Energy in that "extra" magnetic field being wasted inside that coil... ...So...what about using that coil or even a bigger one as the Stator of that same motor?...We could even put it around the magnets and enhance the field magnetic strength.

I have done it both ways, wrapping the coil around magnets and just using My Coil as Stator. It works awesome... even with a fiberglass core...no steel required. We are using a type of current that does not requires heavy steel cores to output a great electromagnetic power.
The Stators could be "pulsed" also, and NOT run them "Linearly" like must Symmetric Motor Generators do...

Now running a Symmetric Generator will bring the drag that we do not need at all...however, it will run it great...but that's not the end either...or what we are really looking for to reach Over Unity.

Both Machines must be Asymmetrical, then the System will be balanced out... and we get to win this game that our Classic Physics has hidden for so long...for the benefit of all.


Regards


Ufopolitics

Hello UFO
Thank you for the statement of the future. I needed that.

Regards
Larry

[Netica]

Hi everyone,

Thank you all for the kind comments.

kEhYo77 - I don't know the torque and power comparisons. Energizing the coil to run the motor still takes a lot of power, in the video its around 80-85 watts.

prochiro - As far as I know you are correct. I purchased the motor second hand and was told it came from an old computer tape drive.

Ufo - Unfortunately I haven't an exact double of this motor but I have similar ones where voltage ratings are a little different.

netica

[prochiro]

DC Motor

Those motors are few and far between. There is, if you search by model number a couple of companied who say they have them but costly. I saw on ebay today several simular motors in the area on 100.00 US. One guy had four yet but I am sure they wont last so get after it.
Dana

[Netica]

Hi prochiro,

I looked on ebay quickly and noticed some rated at 72v, I have them already.

netica

[larryross]

UFO
This is one of my projects (reciprocating electric motor) I did about 4 years ago. I would like to power with this system. I would like to discuss it once you have finished your motor/generator system presentation and have time.
I don't think it will ever be practical, just a novelty, but I would love to drive it to OV.

Regards
Larry

[prochiro]

DC Motors

Netica
Do you believe that those 72 volt motors would be a good choice for this project and would make a good generator??? You must have much more motor knowledge that I and I will get one if you feel that is a good choice or should we shoot for a lower voltage unit.?
Dana

[Netica]

Hi prochiro,

I tried the 72v motor on my set up, also a 36v one, however the 50v one in the video worked the best. The 72v motor didn't work very well.
The coil that I made, by chance, may just happen to match this motor the best. Ufo would understand this much better than myself. I haven't tried any other coils yet or even higher voltages.
When I purchased these motors it was years ago for a wind generator that I never bothered building and they were far cheaper than what I have seen earlier today on ebay. I was told at the time they work well as a generator and they can generate power at low RPM. You can connect two together turn one and the other will turn, but I don't know how efficient they are.
It might be best to try to build a coil to match what you can easily get hold of. Ufo would be able to give the best advice in this regard.

netica

[prochiro]

DC Motor

Thanks Netica
I will wait to here what UFO thinks about motors. Hopefully we will be there soon.
Dana

[kEhYo77]

Meg

OK, this is where I'm heading, tell me what you think...

[Ufopolitics]

Dc Motors...

Hello Netica, Prochiro and Larry,

I am glad you guys are into Motors and Generators!

@Netica & Prochiro: The 72 Volt Motor did not turn well because of exactly what you guys wrote...the coils do not match. A Coil build by Us at random, have a range of Volts/Amps to work with in a stable manner, anything above those capabilities won't do a good job.

All the existing Motors and Generators we all know off WILL NOT perform as we expect related to great outputs, it just won't happen. They all have to be modified, meaning changing structure and methods of windings and internal-connections, now the good news are that must of them could be converted, as long as we could get "extra" or similar matching parts for them.

All my Motors-Generators (and I wrote this "Hint" before, on my very first post at the very beginning of this thread), DO NOT reverse the electromagnetic fields, and they are aligned-connected, as Nikola Tesla wrote on ALL his Electro-Dynamic Machines- Patents, "Independently connected Pairs or Groups of Pairs..."...That is Asymmetry.

All of the Motors Generators we all know off, are all interconnected between them, in a crazy and closed SHORT CIRCUIT "Fashion", called Symmetry, Therefore, They ALL WILL ALWAYS kill the Dipole in every turn, in every nano second of rotation, to then "Re-Build it" again... (as Lt. Col. Tom Bearden explains)...The "Dipole" (related to Electro-Dynamic Machines), Larry Ross, is just "Any Open Coil", where the two terminals get to rotate or just stay OPEN, at any partial angle of the 360 degrees... OPEN, meaning, disconnected from the rest, idling loose...

I am working on the Asymmetry Video now...I will use that video to explain in Full 3D Animated Graphics and CAD's how we could do this and how far we all will get...and that is "very far"...At the same token I will use that video as a "Prior Art Presentation" to avoid any Patent Trolls to try to run to the nearest patent office to "apply" for this job that has taken many years to put together to disclose it as an OPEN SOURCE for all of Us...and for the World...

I will get the compensation to be able to see this machines to be built in Africa, in India, in South America...in the poorest countries for free...that would be my JOY and PLEASURE...I will love to see Gas Engines and ALL related necessary components like Gas Tanks, gas sensors, exhaust-Inlet mufflers, pipes, catalytic converters, air,oil filters...and all that crap, dumped in a huge pile...and those Many, already converting gas to electric vehicles...I will personally post my videos on their channels on "How to make it work"...

That is my "Policy"...and you Guys will help me to get there...Right?
Please be patient...we will make it happen, I am sure of it.


Regards to all


Ufopolitics

[larryross]

Hi UFO
On my motor there are 2 separate identical quadfilar wound coils. Right now the quadfilars are connected 2 in series and 2 in parallel on each spool. There is a 2 inch x 3/4 Inch neodymium magnet (200lb pull) attached to the top of the piston. In the beginning both coils are switched on controlled by 2 pairs of IR transmitters and receivers... one for each coil. When the magnet on top of the piston is drawn up and reaches approx center of the lower coil the coil is switched off and remains off. When the magnet on top of the piston reaches the center of the top coil that coil is switched off and when the piston reaches top dead center both coils are switched on again (since the opposite side of the magnet on top of the piston is now facing the coils the current doesn't need to be reversed) and the magnet on top of the piston is pulled to the center of the top coil where the top coil is switched off and remains off. The magnet on top of the piston continues being pulled to the center of the lower coil and when it reaches the center of the lower coil that coil is turned off. When the piston reaches bottom dead center both coils are switched on and the cycle starts over. I thought this arrangement would have good potential for using radiant energy. I may be wrong that is why I am seeking your opinion and advice. I designed and built this motor 6 or more years ago while taking a CNC milling course. The motor still isn't balanced well... I still need to add weight to the counter balances on the crank shaft.

Thanks for sharing your expertise
Best Regards
Larry

[larryross]

That is my "Policy"...and you Guys will help me to get there...Right?
Please be patient...we will make it happen, I am sure of it.


Regards to all


Ufopolitics

Wow I hope I misunderstood your statement here... I thought you already had made it happen.

[codeboundfuture]

Scrap Hard Drives

I have disassembled 2 old large hard drives that used 5" diameter platers, near perfectly flat and well balanced. Made of a lightweight aluminum alloy that I have not been able to find an accurate description of.

I thought they would be useful for building a motor from scratch, I have almost 80 half inch diameter N52 1/4" deep cylinder magnets that I was planning on arranging into 4-8 sectors of alternating poles. Main idea being that these large platter hard drives should be locatable (ebay) and smaller ~3-1/4" hard drive platters for up to 7200RPM are practically considered plentiful, if it's a feasible rotor for a motor generator it may possibly be the most economical way to recycle those platters, while building our devices.

I hope I'm not getting ahead I'm just getting ready for my motor generator build and thought maybe others would find it useful.

Peace,
matt

[Ufopolitics]

Nice Larry!

Hi UFO
On my motor there are 2 separate identical quadfilar wound coils. Right now the quadfilars are connected 2 in series and 2 in parallel on each spool. There is a 2 inch x 3/4 Inch neodymium magnet (200lb pull) attached to the top of the piston. In the beginning both coils are switched on controlled by 2 pairs of IR transmitters and receivers... one for each coil. When the magnet on top of the piston is drawn up and reaches approx center of the lower coil the coil is switched off and remains off. When the magnet on top of the piston reaches the center of the top coil that coil is switched off and when the piston reaches top dead center both coils are switched on again (since the opposite side of the magnet on top of the piston is now facing the coils the current doesn't need to be reversed) and the magnet on top of the piston is pulled to the center of the top coil where the top coil is switched off and remains off. The magnet on top of the piston continues being pulled to the center of the lower coil and when it reaches the center of the lower coil that coil is turned off. When the piston reaches bottom dead center both coils are switched on and the cycle starts over. I thought this arrangement would have good potential for using radiant energy. I may be wrong that is why I am seeking your opinion and advice. I designed and built this motor 6 or more years ago while taking a CNC milling course. The motor still isn't balanced well... I still need to add weight to the counter balances on the crank shaft.

Thanks for sharing your expertise
Best Regards
Larry

Hello Larry,

That is a nice approach Larry, I understand what you are doing, there is a guy (Troy Reed) that made some similar approach with pistons-crank shaft arrangement also...and He drove in a car that had that system.
The only problem of utilizing permanent magnets (PM) in any given design, is the fact that it can not be scaled up in a certain size and power in order to deliver certain torque and RPM's required by the application, besides the possible magnetic decay that occurs due to constant pulling energy from them...
Despite of that Reed made that car to work out great...but like all "Ends" to this too long lasting "Soap Opera", nothing ever happened after He got his patent granted...
My System works with and without PM, meaning all coils as Stators and Rotors.
I love permanent magnets, for small and midsize applications, including an electric car...but, they limit the system at certain point, no matter if they are Neo's...or other Rare Earth types.

The interesting point I had shown on some of my videos, and you guys that are replicating this coil set-up could verify it, is the fact that when the Coil is at Off stage, idling (T/Off at square wave), it reverses Voltage Polarity, as an Inductor does in a given board...but, it ALSO reverts "Naturally" its Magnetic Polarity, IF, and ONLY IF it is NOT "Disturbed"...now, taking advantage of this great natural response...it could assist our rotation, instead of opposing to it, creating magnetic drag, like it does on Motors-Generators belonging to the Symmetrical Systems.

Larry, of course I will help you to get your machine "tuned up" when I finish uploading my work!, count on it.
But I know you are going to like my systems also, as you will get to understand them completely well. And that will help you see your machine from a different point of view.

Regards


Ufopolitics