Grow plants wit Led's

[John_Bedini]

Plants

Aaron,
Yes I remember that hookup he used it on me, he was the only man the cured me. I still have all his lights somewhere here. Peters light worked also on my finger. in fact he told me to sleep with that wire under the bed sheets, it did work in my basement. Rodger was smart about those things.
John B

Thanks John, will check it out.

Also looks like that chicken wire grid under the bed at Rodger's
that I connected to the earth rods. It speeded healing.

[sucahyo]

Sucahyo,
All kind of things like this have been tried, some of it works and some does not. I did that experiment with my Ham antenna and blew out two radios. Wont be doing that again and yes it does build a charge up.
I think elevating a plate in the air and bringing a wire to the cellar to grow plants works the best.
You could try Tesla's patent other people have made that work.
John B

Thank you. However my question is regarding the energy source. Wether the device that mentioned by Tesla as using sun really is using energy from sun light. Wether it is affected by the existance of the sun or not.

I never heard the relation of sun with the captured radiant power of the antenna, IIRC someone here mention to have greater energy at dawn. No relation to sun.

If this energy not related to sun, then it is possible that Tesla patent replication will not work for plant unless the wire/plate touch the plant, which is different matter (Robert beck?), the same kind of electrocuting ourself with kelvin water droplet electricity. I think everyone try to replace big copper plate on top of the roof with very long small insulated wire will fail to transfer energy carried by sun light to the plant.


In short, I don't agree that Tesla patent is about capturing energy carried by sun light and I want to know if you previously notice the relation between REAC with sun light. Wether REAC will not work at night or not. Wether REAC will work best at sunny day or not.



Another in synch, I recently talk about healing bed to a friend in youtube with this source, a bed surrounded with bifilar coil:
Possible Generation of Dark Energy Via Large Bifilar Coil

[amigo]

Another in synch, I recently talk about healing bed to a friend in youtube with this source, a bed surrounded with bifilar coil:
Possible Generation of Dark Energy Via Large Bifilar Coil

I do not understand the circuit on that page. He has 4 FWBR, but where do the +/- outputs connect to?

When you wind that 500ft of speaker wire (a wire-pair) into a coil, you have two wires at the beginning and two at the end, but we have 4 pairs of outputs from FWBRs? What's the actual hookup then?

[sucahyo]

I do not understand the circuit on that page. He has 4 FWBR, but where do the +/- outputs connect to?

When you wind that 500ft of speaker wire (a wire-pair) into a coil, you have two wires at the beginning and two at the end, but we have 4 pairs of outputs from FWBRs? What's the actual hookup then?

I think the rectifier is actually consist of 4 FWBR in paralel. We connect it just like connecting to one FWBR.

It is mentioned that the bed is powered with pulsed 60Hz DC (although I think if we full bridging 60Hz AC we would get 120Hz DC). The output should all connect to two terminal of the bifilar.

[CosmicFarmer]

Yuck, 60hz. No wonder he felt tired.
When playing with frequencies, its very important you know what your doing. The coil and setup might have been fine, but always go the extra step and allow yourself control of the frequencies. Never let the grid massage you. I have a frequency bible that is over 500 pages of every possible frequency imaginable, all gleaned from non-classified internet sources.


@Jeanna , etc

I am not sure what you plan on growing, (bamboo does great for co2 capturing) but if its going to get TALL, then make sure your led board is able to raise up and lower easily. Once plants get pretty tall and if you are using LEDs, not alot of light will get to the bottom of the plant, and it will become top heavy and become a mess. I recommend putting the plants in a mirror room or box, and waste no opportunity to reflect light back to the plant, including having a reflective plastic cover the dirt to reflect light back up from the underside. Think that shiny stuff birthday balloons are made out of.

If you have already started and do not have a hall of mirrors already, then you can bend the plant every day a little bit so its main stem grows sideways and its branches go up. Banzai style space saver too. Plants aren't smart and don't really know where they should grow, so they go everywhere, and you are to care for it.

Along the lines of "Waking plants up" I was reading about a specific miracle plant procedure where a half an hour before watering/feeding time, a tape was played of very specific frequencies to simulate bird songs, and then the special mix was fed to the plants. Something about the resonant frequency of specific protein factories sped up growth... but I can not find those frequencies. Anyway, just like Pavlovian dogs, the sound before feeding opened the plants up to be more receptive to the nutrients. I bet a mix-tape of local birds would do well. Who knows, maybe specific birds resonate specific plants to grow better?


Johnathan Ott? Jonathan Ott - Wikipedia, the free encyclopedia

I was under the impression he made this music
Amazon.com: Blumenkraft: OTT: Music
but I may be wrong.
Its my favorite CD bar-none.

I did not know he made a light.

I saw a product from LESS-EMF that is a car seat with a grounding connection. Its claimed to reduce electrostatic stress on the user.

[Aaron]

sound

That looks like a different John Ott, this is the one I referred to before:
John Ott - Wikipedia, the free encyclopedia

He is the father of "full spectrum lighting".

That is a good analogy with the Pavlovian method with the sound.

Here is one sound method that works:
Sonic Bloom - Organic Nutrients for your plants, garden or farm

[ray0energy]

littel update

hi guys i have doing sam more growing whit LED this time i use SUPER RGBs
and i put a bonsia tree under it.

so now i let the plant under this light for 24 h so no dark

[sucahyo]

suggestion for LED pulse frequency = 7.2 - 8.2Hz, 400-800nm wavelength

From Igor Smirnov:

Method and device for producing ... - Google Patent Search

http://www.vandrøring.dk/pdffiler/Activated%20water.pdf

The example of use:

Water activated with this mixture found to be excellent for use for enhancing setting of concrete and removal of bacteria from contaminated water, as well for rejuvination of healthy cell

He use it on water, but I don't see the problem of directing it to plant?

[Guruji]

White leds

hi guys i have doing sam more growing whit LED this time i use SUPER RGBs
and i put a bonsia tree under it.

so now i let the plant under this light for 24 h so no dark

Hi Ray does white leds grow plants better than red/blue?
Thanks

[ray0energy]

white not good

Hi Ray does white leds grow plants better than red/blue?
Thanks

hi Guruji white leds ar not the way. becous they dont have so mats red light

see here the spectrum of the whit led VS RGB led



so thats way i like to play wit RGB high power so u can giv the plant the best spectrum.

here is a good site on lets and there spectrum. this guy have done a lot of work to find any led on the planet the show us
The LED Museum - LEDs - LED Flashlights - Gallium Indium Nitride UV, violet, purple, blue, aqua, turquoise, green, white. Also Gallium Arsenide and others. New LED MUSEUM! GaN, InGaN, SiC, GaAs, GaP, GaAlP, ZnSe, flashlight, flashlights.

[Vortex]

ancient earth ecology

reproducing ancient earth ecology will increase plant growth.

One of two conditions: the filtering of sunlight, filter out IR and UV radiation.

reference link:
Dr. Kei Mori of Keio University in Tokyo. Dr. Mori raised plants under special light that filtered out IR and UV radiation. His unique process of fiberoptic sunlight collection and transmission, called "Himawari Sunlighting" (bottom left), is now marketed worldwide. At first Mori feared the filtered light would be detrimental. But after extensive experiments he claimed it could promote healing and "because the ultraviolet is blocked, this sunlight does not fade fabrics or damage skin." (Gilmore, Elaine, "Sunflower over Tokyo," Popular Science, May 1988, p. 75.) One long-lived tomato plant (shown right) was grown in a special nutrient-rich solution to be exhibited at the Japan Expo �85. Under piped sunlight and controlled atmosphere, this tomato tree grew over 30 ft high and yielded more than 13,000 ripe tomatoes during the six months of the Expo! (Hiroshi, Koichibara, "Tomatomation," UNESCO Courier, March 1987.)

A must see:
For confirming evidence supporting ancient earth ecology watch:
The Killing of Paradise Planet
@00:33:25 of video covers Japanese physicist Dr. Kei Mori of Kao University in Tokyo

Help me out here, what LEDs would produce the least
amount of IR and UV light?
randy

p.s.
Create your own IR filter

[jeanna]

led colors for growing plants

Help me out here, what LEDs would produce the least
amount of IR and UV light?
randy

p.s.
Create your own IR filter

yellow?

I think this is a very interesting question.
I have been planning an experiment that would have single color leds as the only light source.
It might be a great start, just to try out each led color with a simple plant and take measurements after a week then a month.
It requires some under-used closets, or something like that, but making up a few led circuits is a very easy job.

I will be very happy to follow what you are learning from your experiments.
Bravo

jeanna

oops I missed your ps link. I will check that one too- j

[sucahyo]

Help me out here, what LEDs would produce the least
amount of IR and UV light?

If you see the graph above your post, LED have very thin bandwith range. So if the LED is red then it only emit mostly red without ever going to infra.

Even the white one has very limited bandwith from the graph show above.

My opinion is you don't need filter. any LED will not produce UV or IR unless it is specifically designed to emit at that light spectrum.

Filter may actually reduce efficiency because it may actually block the spesific bandwith that the LED emit.

[Guruji]

hi Guruji white leds ar not the way. becous they dont have so mats red light

see here the spectrum of the whit led VS RGB led



so thats way i like to play wit RGB high power so u can giv the plant the best spectrum.

here is a good site on lets and there spectrum. this guy have done a lot of work to find any led on the planet the show us
The LED Museum - LEDs - LED Flashlights - Gallium Indium Nitride UV, violet, purple, blue, aqua, turquoise, green, white. Also Gallium Arsenide and others. New LED MUSEUM! GaN, InGaN, SiC, GaAs, GaP, GaAlP, ZnSe, flashlight, flashlights.

Hi Rayoenergy RGB stands for Red;Green and Blue? And what about yellow leds did you try these?
Thanks

[ray0energy]

Yellow leds

Yes in one of my 1e projects (see the pics in the 1e page)
I use ir leds and uv LEDs to make the hole spectrum