Eric Dollard

[HaroldNesland]

In the recent live call with you and Eric, I discussed sharing some circuital schematics for an instrument to measure "sidereal radiation" and extraterrestrial electrical phenomena as they related to our electrical environment. It has occured to me before writing this even that you have a lot more time and experience accumulated into investigating electrical phenomena and the like, so if this is once again a repeat of information here or that you've already read, I am sorry. I had read about the electrometer originally in the book "Defying Gravity: The Parallel Universe of T. Townsend Brown", referring to scholastic, naval and federal funding for experiments such as to retry the Trouton-Noble experiment supervised by Dr William Francis Gray Swann through the Franklin Institute Laboratories for Research and Development, and it was described as one of the first stations to measure, from my understanding, dielectric constant and resistance variations (of copper for instance) within our environment. The book is quite lengthy roughly 500 pages and speculates quite a bit from a similarly uneducated view of what potentially he could have been working towards.

Upon further research, the building in which the aforementioned electrometer was located was the Banks-Huntley located is currently occupied by the "mexican american legal defense and educational fund". From my investigations as to why, the second basement where it was reportedly located had 20 foot thick concrete walls acting as an insulation towards electrical activity, making it an ideal environment to study the phenomena. In 1996 the Southern California Edison company donated $250,000 towards the renovation of the building for MALDEF.
https://www.latimes.com/archives/la-...496-story.html

I unfortunately am still not educated nor experienced enough to understand the totality of what's available online for the diagrams, but rather than waste Eric's time mailing him a large packet of information to pilfer through, I figured I'd post what materials were available here and directly link the page information. Unfortunately, most of the content is pertaining to electrogravitic propulsion instead of detection of cosmic rays and electrical environments. That being said, there are tidbits.

Electrometer Studies:
http://www.rexresearch.com/brown1/brown1.htm starting at Page 15, (5). "Shift of Capacitance Mid-Point" describes a primitive measurement device with circuit diagram. The discussion continues at Page 90, (51.) Shift of Capacitance Mid-Point in relation to measuring said phenomena with a circuit diagram.
http://www.rexresearch.com/brown2/brown2.htm starting at page 46 (Entry 97) he begins discussion of both the rotary and a linear electrometer in regards to detecting the 'radiation' and begins discussion relating the Miller ether drift experiments to the data he has collected, denouncing the narrative of standard relativitists in regards to the experiment.

http://www.thomastownsendbrown.com/stress/egdonr.htm Here starting from 2.4) is discussion relating to a proposed communications device with schematic. The information here pertaining to the electrometer starts at 5)

Communications device:
https://starburstfound.org/aerospace...interhaven.pdf On Page 10 (pdf page 18/66) A reference is made "induction between systems of capacitors involving propagation and reception of gravitational waves" describing what my naive/untrained mind is what Eric refers to as longitudinal magneto-dielectric waves.
--- "Radiation is more penetrating than radio (has been observed to pass readily through steel shielding and more than 15 feet of concrete), In 1952 a short-range transmitting and receiving system was completed and demonstrated in Los Angeles. Transmission of an actual message was obtained between two rooms - a distance of approximately 35 feet. Transmission was easily obtained through what was believed to be adequate electromagnetic shielding, but this test must bear repeating under more rigorous control."
The discussion as to communications continues through page 15.
Pages marked 23-25 further discuss possible implementation of the communications. I am unsure of what Thomas Townsend Brown's idea of gravitational waves were, I'm only confident that he expressed their reality through networks of dielectrics and or capacitors.
http://www.thomastownsendbrown.com/ecomm/ecomm.htm I do not believe that there was a patent granted, if there was I can not find it, nor the patent art.
http://www.thomastownsendbrown.com/t...rown_11-55.pdf Page 3 starts to further discuss the ideology behind the creation and implementation/experimentation with the electrometer.

[Aaron]

TODAY - STARTS IN 1 HOUR 10 MINUTES

SATURDAY, MAY 2, NOON PACIFIC TIME - LIVE CALL WITH ERIC DOLLARD

This Saturday, we're having another live call with Eric Dollard - he wants to discuss the current situation with the sun, it's connection to Earthquakes and it's possible influence on some societal events. Just call this number in the United States: +1 (857) 232-0155 and enter this code: 582590

[t-rex]

III

Consider the hypothetical situation where the open wire line is terminated at one end by a telephone central office (C.O.) and at the other end by a telephone subset. Initially the subset is “on hook”, or in an open circuit condition, which accordingly draws no current. The C.O. end of the line supplies a 48 volt direct current potential, through its line coil, and the line is thus in a steady state of i₁ equals zero and e₁ equals 48 volts. No power flow exists in the line, this P₁ equals zero [8].

At the start time, t equals zero, the subset is lifted “off hook”, closing the circuit through its network, which begins to draw a current, reaching a steady state of 20 milliamperes over time interval, τ. Because the subset is now consuming electric power, P₀, this engenders an electro-motive force of 6 volts. Accordingly a line potential of 6 volts is established giving the power, P₀, as 120 milliwatts at the subset end of the line.

The network response to its connection to the “charged” line establishes a transient of time span, τ, seconds, and this transient immediately begins its propagation toward the C.O. end of the line. This condition is portrayed by the Time-Distance diagram, Figure 1b.
figure-1b.jpg


The duration and wave-shape of the network transient is preserved in the course of its propagation along the length of open wire line, and accordingly represents an impulse if electromagnetic induction, ρ, propagating in an electric medium, μη, which is bound between the line conductors. Its field of force has been portrayed by Figure 1a [9].

Because of the finite propagation time of this impulse, initially the C.O. still sees an open circuit and its power, P₁, remains zero. The power, P₀, is initially supplied to the subset solely by the discharge of the line potential, e₁, effected by the travelling impulse, ρ. Hence, on either side of this impulse, exists a pair of steady states, P₁, on the C.O. side of the impulse, and, P₀, on the subset side of the impulse. This electromagnetic impulse, ρ, thus serves as an intermediary between the two steady states, converting one steady state, P₁, into another steady state, P₀, this acting within the time interval, τ, seconds, and spanning length of line, λ, centimetres [10].

---

References

[8] Transmission Systems For Communications, Bell Labs, 1970, pages 68-74.
[9] Electromagnetic Theory, Oliver Heaviside, Art 177-178 pages 307-313, Art 190 page 342.
[10] Electromagnetic Theory, Oliver Heaviside, Art 176-177.
[10] Theory Of Electricity And Magnetism, Max Planck, pages 1-3.
[10] Communications Networks, Ernst Guillemin, pages 48-50.

[Aaron]

RECORDING OF ERIC DOLLARD'S LIVE CALL FROM APRIL 4 ON YOUTUBE

A high school student demonstrates electrodynamic seismic forecasting that gives results better than what the government has - he shares his work on the live call with Eric Dollard - you can see the charts and diagram of simple setup - http://ericpdollard.com/2020/04/20/2...ard-live-call/

[t-rex]

II
figure-1a.jpg




Figure 1a depicts the electric medium bound by the line conductors when this medium is in an electro-tonic state [2]. In this condition the electric medium, μη, has become polarized into what have become known as “lines of force” [3].

This portrayal is based upon the conception, introduced by Faraday, of tubes of electro-static induction. This provides a language in which to express the phenomena of the electromagnetic field of induction. It is by their tendency to contract, and the lateral repulsion which similar tubes exert on each other, which explains the forces between electrified bodies. Such tubes can be hereby called “Faraday Tubes” [4].

It has come to pass that there exists two entirely different viewpoints in considering the pondermotive forces acting upon the line conductors. One is that adopted by the mathematical physicist, this analogous to Newton’s way of expressing the fact of gravitation. The other way is that the Newtonian conception of forces acting at a distance, through vacuous space, are mathematical fictions only, and have no real existence. What is real are the manifest stresses existing in the electromagnetic field of induction [5].

The electromagnetic field of induction divides into a pair of constituents exhibiting a conjugate inter-relation, and thus everywhere establish themselves into a right angle relation in space with respect to each other.

The primary constituent is the electrification of the electric medium. Shown in green, these lines of force, ψ, present themselves as radial lines which exist in attachment to the bounding line conductors. These lines of force, so-called because the force manifests along their path in space, exists in a state of tension which act to draw the conductors together as a contractive force.

The secondary constituent is the magnetization of the electric medium. Shown in red, these lines of force, φ, present themselves as circumferal lines which surround the bounding line conductors. These lines exert an inward broadside pressure which acts to push the pair of conductors as an expansive force [6].

It is evident that, while this pair of distinct lines of force exists in a condition of space quadrature, the acting forces they exert upon the line conductors present themselves in space opposition. It is a characteristic of the Faraday tubes in general that whatever tension exists within these tubes, it is matched by an equal broadside pressure between the individual tubes against each other [7].

---

References

[2] Electricity & Matter, J. J. Thomson, pages 1-35.
[2] A History Of The Theories Of Aether & Electricity, From The Age Of Descartes To The Close Of The 19^th Century, 1910, E. T. Whittaker, pages 212 & 272.
[3] A History Of The Theories Of Aether & Electricity, From The Age Of Descartes To The Close Of The 19^th Century, 1910, E. T. Whittaker, page 190.
[4] Recent Researches In Electricity And Magnetism, J. J. Thompson, page 3.
[5] Electromagnetic Theory, Oliver Heaviside, Art 86 page 109, Art 176 page 307.
[5] Transient Electric Phenomena, C. P. Steinmetz, pages 4-5.
[6] Recent Researches In Electricity And Magnetism, J. J. Thompson, page 14.
[6] Electric Discharges, Waves And Impulses, C. P. Steinmetz, pages 10-18.
[6] Electromagnetic Theory, Oliver Heaviside, Art 74 pages 89-90, Art 78-81 pages 95-100, Art 82a page 102.
[7] Electricity & Matter, J. J. Thomson, page 16.
[7] A History Of The Theories Of Aether & Electricity, From The Age Of Descartes To The Close Of The 19^th Century, 1910, E. T. Whittaker, page 301.

[t-rex]

Magnetic Boundary Condition

Chapter 1

I
front.jpg



figure-1.jpg




Shown in the cover photo, Figure 1, is an open wire telephone transmission pair, this being isolated at face level during a crossarm replacement procedure. While it is invisible to human sensibilities, 16 simultaneous telephone conversations are active within the space bounded by this transmission pair [1].

This photo presents the fundamental archform of electromagnetic transmission in its three principal elements:

1. Line Conductors; Consisting of a closed boundary of metallic copper, this being reflective to the bound electromagnetic induction.
2. Line Insulators; Consisting of a spaced pair of dielectric glass supports, these being transparent to the bound electromagnetic induction.
3. Electric Medium; Consisting of an electric fluid in which the transmission pair is immersed. This medium supports the establishment of the electromagnetic induction. This is represented by the blue sky.

Hence the electromagnetic transmission process is facilitated by the elementals of reflection, transparency, and inductivity.

---

References

[1] Principles Of Electricity As Applied To Telephone & Telegraph Work, AT&T, 1953, pages 175-178.

[aminnovations]

Hi,

I have added a new post to my website:

http://www.am-innovations.com/teslas...-matter-part-1

This is the first post in a sequence where I take a look at Tesla's Radiant Energy and Matter, introducing suitable apparatus, experiments, and phenomena that are usually attributed to this fascinating area. The post includes an hour long video on the experiments and phenomena, along with a consideration and discussion of the observed phenomena, and possible interpretations as to their origin and cause.

The experimental work investigates aspects of the following:

1. The difference in powering a load with a conventional closed-circuit from the primary coil of a spark gap generator, and a single wire from the Tesla coil secondary.

2. The change in properties observed in the load in a single wire with load position, generator matching, and changes in the single wire cavity length.

3. The force exerted on different materials as a result of radiant energy/matter emanating from an incandescent lamp emitter in the single wire load.

4. The different responses of materials to radiant energy emanating from the lamp emitter.

5. The radiant matter pressure wave emanating from the lamp emitter, as experienced by the human hand.

6. Discharge “plasma-like” emanations directly from the lamp emitter to the surrounding medium.

7. Vibration and physical movement stimulated in the lamp filaments when radiant energy interacts with another object in the surrounding medium.

8. Cool lamp glass temperature when emanating considerable light from the lamp emitter, a so-called “cold” electricity phenomenon.

9. Radiant energy charging of a capacitor, accompanied by subsequent discharge in a neon lamp load, showing a “cool” white-bluish discharge, and a violent snapping sound.

10. An initial consideration of the inter-relationship between the longitudinal and transverse modes of electricity in the single wire load.

11. The transformation of energy from the longitudinal mode to the transverse, and the dissipation of this energy as power in the single wire load.

Best wishes,
Adrian

[Aaron]

New thread started by Eric Dollard: http://www.energeticforum.com/forum/...ic-forecasting

[Aaron]

LIVE CALL WITH ERIC DOLLARD, APRIL 4, SATURDAY, 1200PM PACIFIC TIME

We're guessing a lot of people will be available to call in due to the stay at home recommendation or orders so call in and ask some questions! There is some interesting astrological elements in play that Eric would like to discuss along with his other work so not only interesting but might be a pretty unique talk.
To get on the call, simple call in with a phone, skype voice or any other app that can call land lines: +1-857-232-0155 and enter the pin code: 582590

[Aaron]

Aaron,
It is the 'subscribed' icon at top right and just before the Posts begin that needs to be highlighted.
When you sign in, this becomes active.
Thanks.

Smokey

What do you mean?

[David G Dawson]

Aaron,
It is the 'subscribed' icon at top right and just before the Posts begin that needs to be highlighted.
When you sign in, this becomes active.
Thanks.

Smokey

[David G Dawson]

Nikola Tesla:

http://www.journal.ftn.kg.ac.rs/Vol_13-3/01-Cvetic.pdf

Very clear picture of the Lab components - see attached.

Note the so called spark gap C1 - C2 which isn't - it is a PLASMA GAP and this is the same discovery made in my 'Impulse Discharge' device and why a rope is used to adjust the gap balls to a maximum efficiency and is the same as adjusting a coil or capacitor in a transmitter for minimum plate current.
When you do this adjusting you would be looking at a power meter telling you how many amps you were consuming at the input and at the peak, the meter would drop to a minimum with just a plasma across the balls - no spark.
The system begins to sing when that plate current is reduced to minimum.

TEM transmit - direct connection via variable L & C.
LMD transmit - indirect connection via a variable Plasma Gap.

I believe our Crystal Set Initiative (CSI) is a little back to front at the Extra Coil as we used two large copper rings between the Secondary and the Extra and think it better to use two adjustable balls after the extra as in the attached schematic.
However, this setup was probably used more as a test bed to determine tuning characteristics and efficiency.
Will get to this when I can get back to the bench.

Smokey

[BroMikey]

Thanks Aaron

[Aaron]

[Aaron]

Eric, here's the latest update - I think there is supposed to be something next to the hv potential transformer on the rectifier panel - some HV terminal strip that is supposed to be elevated?

20200227_153956.jpg

20200227_171947.jpg

20200227_171922.jpg

20200227_171947.jpg

20200227_171955.jpg

20200227_174935.jpg

20200227_175006.jpg

Eric, for the video, click in the middle of the image below and it will open up bigger. Then click the play button in the middle of it and it will start playing.