Eric Dollard

[dward]

Trevor James Constable:
This Post is dedicated to the rainmaking work of TJ Constable and supports his observations and development of tools that are able to produce rain and this from a sky clear of clouds and in a matter of only a few hours.
We have been in a serious Nation wide Drought in Oz which began early in the year for those Inland and in the northern Monsoon areas.
Coastal dry began in July and my normal tools did little to change the scene and as a consequence made a total review of the devices and how they should be operated.
Those in the South had a very wet and windy Winter with record rain and probably also wind.
The Climate Change & Global Warming & Carbon Tax people just love these Droughts to support their unfounded theories but those of us working above the navel understand the reality of the situation.

Realisation came to me that my rate of operation was way too high and needed to slow the pace down to a gentle caress of the atmosphere.
I already had 3 geared motors and put these to work at 1 and 2 rpm and built a further 'Termite' unit and now have 5 - two 'pHi Triggers' of different size who work rapidly at 60 and 120 rpm and 3 slow Termite/Skimmers.



Uploaded with ImageShack.us

60º and 135º Cones in 'Termites' - DC motors are 2 speed rear window wiper and allow rpm down to <1.

I had been rotating the 'David Wells Machine' during the month with directional tests but am still not confident that I had made any changes to the DOR but this is an unknown and time will tell as the pulse output is Scalar in nature and may take time to materialise into this dimension.
This may be termed a 'Counterspace Device' - listen to Eric Dollard and Aaron Murakami and what Eric is saying about the Aether and Scalar (NO WAVE) in their latest video, I will also confirm through my working with the Aether:

https://www.facebook.com/ericpdollard

On the 7th of November, all 5 devices were rotated and monitored for a 14 hour period and then stored.
These devices do not have to be out in the open but can work from the bowels of a ship some 6 decks down and below the waterline as TJ Constable easily proved with an ellipse 'Spider' device.
Previous to this was a week of stop start running where I was adjusting the devices as I had problems with some stopping at the low revs, problem is now resolved.
I have always been disappointed in my ability to make it rain locally but that may now be a thing of the past as long awaited rain began falling on the 9th and is ongoing.
I do not always expect an immediate response as my climate is not labile (liable to change) and have allowed events time to mature in their own space.
At the 28th of November I have 232mm in the gauge with an average of 83.9mm for November and an observation that I appeared to receive much more than those some 500 meters away with one storm cell hovering overhead and letting loose.
The fact that I also have a 'Lee Crock Rainmaker' deployed might also assist in that area.
It would appear that the caressing of the Atmosphere began here from Source and spread sideways such that the entire 3rd of the Eastern Continent is now back to a regular rainfall.
I continue to eliminate coincidence as a part of the equation as the Aether only needs a drastic caress to initiate a change.
I am most fortunate as I sit in the middle division of the area between temperate and subtropical.
We are now just seeing the beginning of Inland rain where it is needed the most and the Monsoon appears to be in an early full swing with one backwards and weak Cyclone already at work in the worst affected area.



Uploaded with ImageShack.us

Two 'pHi Triggers' that run at 60 and 120 rpm.
All Cones are being replaced with Aluminium as initially all I had was Iron and that is Aetheric neutral.

A Drought is Male, a High pressure system, hot and dry.
A Wet is Female, a Low pressure system, cool and moist.
Appears that the Aetheric atmosphere just loves the Female gentle caressing touch and immediately responds with rain (the smell of Jesus Christ) and then you also begin to wonder why the Female has always been supressed - just an understanding developed over time.
Is the mothering of the Aether the catalyst that allows this change to occur - like a Mother & Child bonding relationship (contractive), ever so much stronger than a Male (expansive) one could ever be?
So there you have it, vortexes in the air and my 'Concious Intent' riding on the vortex.

Rains have been of a record intensity in some areas but there is also a content of damage and this has been recorded with massive hailstones and alley winds that have been tornadic in nature but also brief.
We need the rain to survive and history will show that the damaging negatives are always there but the positives will always win.



Uploaded with ImageShack.us

This unfortunately is a result of a Storm that passed through on Monday 25th, an 80' (24m) Blackbutt Eucalyptus tree which was blown out of the open soggy ground by an extreme wind - no vortex here, just brute frontal force and with no damage to property.
This is some 500 meters from our property - all I heard was a roar from the other side of my protective barrier of mass trees supporting one another.
Amazed at the sudden change from dry to wet and it was just so easy to do, like throwing a switch.
Thankyou TJ Constable and fellow workers and to Layne Meade and BSRF for making the information available in the public place.
Caution required here as this all requires much work and thought and has taken me some 13 years to do so, as ALL the required information is not readily available and a bit like a Patent - you are required to do some of the work yourself and he will work WITH you if you ask him to.
Remember, he doesn't work FOR you (Walter & Lao Russell).
In deep appreciation.

Smokey

Sent you a PM about this stuff

It's VERY interesting that you say(and I assume that means that you have some data to back this up) that Iron is Neutral and Aluminum is not. I have not ventured far from Reich's original material specifications for my Orgone atmosphere devices. I have done this because I have to directly interact with my machines to interact with the weather, and since he found aluminum to eventually lead to DOR conditions inside the ORAC I figured, for now I would stick to steel devices for my own health.

After talking, for a few hours, with David Wells a several months ago I was able to correlate Viktor Grebennekov's Cavernous Structures Effect, and the Orgone energy effects of Reich. Carbon is my detector of choice when just using my hands to find this energy. Viktor's experiments are Orgone experiments.

With that functional discovery I've started investigating the possibility of Fractal, multi-cellular cloudbusters(ala cavernous structures effect), using natural materials, not just man made ones.

Have you looked into Pier Luigi Ighina? His cloudbuster used an in ground orgone battery made of 2-3mm aluminum machining chips; 700kg's of them, which was actively powered by a device which marconi built for him, which he called a magnetic monopole generator(i've posted a schematic previously). Anyway, I'm a huge fan of what you're doing down there with these devices, I'm glad someone has taken it upon themselves to put these devices to good use.

[cyborg]

David G Dawson/hendershot Gen

quote "However, can see this as an ongoing project that does not, at this stage, show promise and will be putting aside as one that we can get back to as we develop new ideas and incentives.
Eric is probably correct in these types of projects as deviations away from the real focus but have learnt a great deal as is usual with any challenge and the time was not wasted while your end was sorting itself out."

You sir are certainly a prolific builder, but I guess the real lesson learned was:
a) Choose your projects wisely
b) Don't believe everything you read on the internet!

There was never any way on God's green earth that Hendershot device could have or ever will work! You just about cursed at me when I tried to warn you, but you forged ahead and learned the hard way. Now you know the truth.

I'm not sure what you are trying to do with the Tesla and pulse network stuff, but at least we can all agree that stuff actually will do "something".
You can spot and zero beat the TC carrier with the radio's BFO if it has the variable type. The fixed tone type is usually set at 700 hz for cw on the Yaesu radios.

Are you building these things for fun or are you doing a specific experiment?

Personally, I'm anxious to see someone build some version of the Alexanderson antenna system and teleport something to the receiving station as per Eric Dollard...
Any takers?

[David G Dawson]

Pulsing &amp; Radar &amp; TTPG &amp; CSI etc

Review from the work of Professor Dollard:
'EricPDollard' Page 21 Post 612 'Pulse Generators etc'.
Magic words like:
loaded condenser
Impulse
It is a transmission network in a counter spatial form
The Guillemin Line is a loaded dielectric network
The "Type A" line can be considered a longitudinal magento transmission line. This is important. (me - LMD)

From the video - a 'disruptive discharge', example is a spark gap that exceeds its ability to hold the stored charge and fires over to the other terminal.
Delay Lines and what they are used for and a basic understanding of Radar which is now unfortunately, in the hands of the few:

https://archive.org/details/IntroductionToRadarSystems

Chapter 9 for Delay Lines and why different pulse rates are required to reduce noise and why the AD-YU has 12 positions and a variable to boot.
Can I use the AD-YU for reverse use in a pulse transmitter, possibly and about to find out on very low power as I need to know how it is constructed but the caps and coils will be very much voltage limited (I have two)?

When you read Eric's material, you neeed a highliter to uplift the words that make what he is saying just that much different from the regular material as I have done above.
When you come back later and read, all you need to do is look at the highlites.

Review:
MIT Chapter 5 Pulse_Generators:

http://www.febo.com/pages/docs/RadLa...Generators.pdf

Guillemin's Theory Page - 189
'Type A' - Page 201 Fig 6-22

I am reviewing Eric's notes and need now to rebuild my pulse network (NET) as I originally built a 'Fig 6-28' on Page 205 and now need to go back and adjust spacing at the ends as I have now read the instructions.
Eric may like to comment here after his statement above that the 'Type A' as being the ONLY one to use?
Will probably do both as a confirmation as I previously did not have the suitable bits.

Fired up the TTPG (Tesla Transformer Pulse Generator - 5R4GWB and 2050) into the CSI today after sorting out some power problems and can hear the 180 hertz drive at the Thyratron and can see a violet glow but HT drops to the 40s and not sure why.
I have 180 to 360 and 100 to 200 hertz here in notation as Driver frequency and not sure where that came from and will review my notes.
Pulse is square wave positive going 5v from Wavetek.
HT is good, 470 volts from transformer x 1.414 x 2 from doubler = 1329 volts - checked this without 2050 in place up to 600 volts and looks good.
Variac for HT transformer and a seperate transformer for heaters.
Had to use two sided tape to hold the secondary turns in place as they had dropped in several instances - would pay to turn the dowels 180º as they would be bent under pressure after time.
If this happens, the signal disappears and mine went from a 5 to about a 1 and this shows the importance of correct spacing.
Good to see that comforting glow again!

Did a check on the Yaesu at 1860 hertz but found nothing - interesting having the aerial connected to the CSI ground - expecting somebody to be there calling!
Somebody has a 1 second pulse buzz going at 1810 hertz.

Will put the RMR (Regenerative Magnifying Receiver) on line also as this was waiting for me to sort out power supplies.
You mentioned some complex issues in this area and would be good to sort that out now.
CRD (Cosmic Ray Detector) will put back on line and monitor and still have some checks to complete for that.
Your video on all these issues helped greatly as it answered some of my questions as to the operating principles.



Uploaded with ImageShack.us

Looking to the future as I believe these will all light up if I can get the TTPG working and probably every Vacuum Tube in the same room as that is where they are all stored, 1,000s plus.
Thought you said there was no free lunch here?
3", 4" and 51/2" lamps all NOS - the large has a large amount of metal floating inside and not sure of its purpose.

Smokey

[d3x0r]

Maybe I did learn something

so, different parts of the circuit can have different levels of power.....

https://code.google.com/p/c-system-a...RoyerSimulator link on page (falstad simulator)

This link shows 5.8mW input and two loads with 1.72W output 180 degrees out of phase... but it's spuratic... maybe the sum under the curves is equal? I don' think so....

it claims 5.8mW input and w loads with 1.79W output... thats like 1:308 ratio... and I don't think that it's only like 1/4 frequency not 1 in 308... this does resemble what I have on my bench; although better tuned....

Circuit Simulator Applet

[d3x0r]

was thinking it would be nice to have some theoretical examples of changing inductance/capacitance parameters, and which direction is an amplification...

(snip from eric dollard's book 4quad theory)
dollard-power-amp.jpg

Re hendershot; the russian replication is just a couple layers of wire on stout iron cores; I made mine with a lot of turns (thousands) of 28GA wire; figuring a lot of inductance would be better; but I think this needs lower resistance. With my iron bar/magnet it only triggers less than a volt even with so many turns..

hard to know what was meant when someone describes things as common to their time as if it's always going to be that way

[David G Dawson]

AWE Aetheric Weather Engineering

Trevor James Constable:
This Post is dedicated to the rainmaking work of TJ Constable and supports his observations and development of tools that are able to produce rain and this from a sky clear of clouds and in a matter of only a few hours.
We have been in a serious Nation wide Drought in Oz which began early in the year for those Inland and in the northern Monsoon areas.
Coastal dry began in July and my normal tools did little to change the scene and as a consequence made a total review of the devices and how they should be operated.
Those in the South had a very wet and windy Winter with record rain and probably also wind.
The Climate Change & Global Warming & Carbon Tax people just love these Droughts to support their unfounded theories but those of us working above the navel understand the reality of the situation.

Realisation came to me that my rate of operation was way too high and needed to slow the pace down to a gentle caress of the atmosphere.
I already had 3 geared motors and put these to work at 1 and 2 rpm and built a further 'Termite' unit and now have 5 - two 'pHi Triggers' of different size who work rapidly at 60 and 120 rpm and 3 slow Termite/Skimmers.



Uploaded with ImageShack.us

60º and 135º Cones in 'Termites' - DC motors are 2 speed rear window wiper and allow rpm down to <1.

I had been rotating the 'David Wells Machine' during the month with directional tests but am still not confident that I had made any changes to the DOR but this is an unknown and time will tell as the pulse output is Scalar in nature and may take time to materialise into this dimension.
This may be termed a 'Counterspace Device' - listen to Eric Dollard and Aaron Murakami and what Eric is saying about the Aether and Scalar (NO WAVE) in their latest video, I will also confirm through my working with the Aether:

https://www.facebook.com/ericpdollard

On the 7th of November, all 5 devices were rotated and monitored for a 14 hour period and then stored.
These devices do not have to be out in the open but can work from the bowels of a ship some 6 decks down and below the waterline as TJ Constable easily proved with an ellipse 'Spider' device.
Previous to this was a week of stop start running where I was adjusting the devices as I had problems with some stopping at the low revs, problem is now resolved.
I have always been disappointed in my ability to make it rain locally but that may now be a thing of the past as long awaited rain began falling on the 9th and is ongoing.
I do not always expect an immediate response as my climate is not labile (liable to change) and have allowed events time to mature in their own space.
At the 28th of November I have 232mm in the gauge with an average of 83.9mm for November and an observation that I appeared to receive much more than those some 500 meters away with one storm cell hovering overhead and letting loose.
The fact that I also have a 'Lee Crock Rainmaker' deployed might also assist in that area.
It would appear that the caressing of the Atmosphere began here from Source and spread sideways such that the entire 3rd of the Eastern Continent is now back to a regular rainfall.
I continue to eliminate coincidence as a part of the equation as the Aether only needs a drastic caress to initiate a change.
I am most fortunate as I sit in the middle division of the area between temperate and subtropical.
We are now just seeing the beginning of Inland rain where it is needed the most and the Monsoon appears to be in an early full swing with one backwards and weak Cyclone already at work in the worst affected area.



Uploaded with ImageShack.us

Two 'pHi Triggers' that run at 60 and 120 rpm.
All Cones are being replaced with Aluminium as initially all I had was Iron and that is Aetheric neutral.

A Drought is Male, a High pressure system, hot and dry.
A Wet is Female, a Low pressure system, cool and moist.
Appears that the Aetheric atmosphere just loves the Female gentle caressing touch and immediately responds with rain (the smell of Jesus Christ) and then you also begin to wonder why the Female has always been supressed - just an understanding developed over time.
Is the mothering of the Aether the catalyst that allows this change to occur - like a Mother & Child bonding relationship (contractive), ever so much stronger than a Male (expansive) one could ever be?
So there you have it, vortexes in the air and my 'Concious Intent' riding on the vortex.

Rains have been of a record intensity in some areas but there is also a content of damage and this has been recorded with massive hailstones and alley winds that have been tornadic in nature but also brief.
We need the rain to survive and history will show that the damaging negatives are always there but the positives will always win.



Uploaded with ImageShack.us

This unfortunately is a result of a Storm that passed through on Monday 25th, an 80' (24m) Blackbutt Eucalyptus tree which was blown out of the open soggy ground by an extreme wind - no vortex here, just brute frontal force and with no damage to property.
This is some 500 meters from our property - all I heard was a roar from the other side of my protective barrier of mass trees supporting one another.
Amazed at the sudden change from dry to wet and it was just so easy to do, like throwing a switch.
Thankyou TJ Constable and fellow workers and to Layne Meade and BSRF for making the information available in the public place.
Caution required here as this all requires much work and thought and has taken me some 13 years to do so, as ALL the required information is not readily available and a bit like a Patent - you are required to do some of the work yourself and he will work WITH you if you ask him to.
Remember, he doesn't work FOR you (Walter & Lao Russell).
In deep appreciation.

Smokey

[David G Dawson]

The Electrical Experimenter

Wish to express my gratitude in having a resource as this Forum which, to me, represents Layne Meade's BSRF (Borderlands Science Research Foundation) which in reality, no longer exists apart from the dissemination of stored data, ongoing slowly but surely.
Will be getting back to the CSI/CRI, CRD, RMR and TTPG shortly.
(Crystal Set/Radio Incentive, Cosmic Ray Detector, Regenerative Magnifying Receiver and Tesla Transformer Pulse Generator)


Uploaded with ImageShack.us

Hendershot Generator:
Have finished the construction including the home-made capacitors (7800pF) which work well and are able to be tuned and currently working on his 'Resonator' using bell-ringer coils and iron bar/magnet as this is the unknown (mine - at least) and investigating optional means of generating the 'buzz'.
However, can see this as an ongoing project that does not, at this stage, show promise and will be putting aside as one that we can get back to as we develop new ideas and incentives.
Eric is probably correct in these types of projects as deviations away from the real focus but have learnt a great deal as is usual with any challenge and the time was not wasted while your end was sorting itself out.
Two phenomena were experienced with this device as follows:
1. 11,000 volts AC detected in a loose connection where a spark/arc/plasma event occurred and this was an option attempt at the 'resonator' using a 4 volt split-reed multivibrator.
See what can happen in a 'Disruptive Discharge' or 'Impulse Discharge' event?
2. Ferro Resonance or NMR (Nuclear Magnetic Resonance) achieved at the bellringer coils with iron bar across their faces where some 220 volts AC was developed through two identical opposed bifilar coils placed over the bell ringer types.
See bottom left corner.
This is a Meyer-Mace type event and worthy of further study and was actually my very first OU attempt some 7 years ago.

Michel Meyer -- isotope transmutation electric generator

Aaron, Eric,
Many thanks for the latest video as you express reality there in a different manner and was able to extract much information and particularly with respect to the CSI/CRI, CRD and RMR Tube devices which we have built waiting operation.
Scalar now makes more sense and is the 'there' thing and not the 'here' thing if that makes any sense.
Understand more now on the Tube projects and will be getting those powered up.
Eric's effort in this direction was most appreciated and will not be lost.

John Polakowski,
Cudos to you John for your excellent devotion and focus to a project and succeeding with the CIG.
Waiting now to see results of this device in operation - again.

Eric was talking about a HF receiver he would like and would guess that this would need to get down to 1860 hertz for the Telluric experiments.
The HF one I have here is a Transceiver Yaesu FT-901D and this gets down to 1600hertz and the reason why I purchased as most start at 3mhz.
However, this is 50/50 modular solid state and Tubes (2 x 6146B) but is a beautiful machine.
Full Tube machines here are hard to come by.



Uploaded with ImageShack.us
GLOM:
Picked up a 1350 hertz Philamon Tuning Fork and several Delay Lines (DL) (4 by Admiral and 2 by AD-YU, 12 position with fine tune) which nobody else wanted and these are a lesson in pulse design but not able to glean much information from the NET on the DLs and would like to know their construction.
If anybody here can assist in schematic recognition it would be greatly appreciated.
Have also secured a NOS 12 volt split-reed multivibrator (OAK/MSP AV5948R) for the PP-18/AR and now have all the bits to build but later on that one.


Uploaded with ImageShack.us

Top: Multivibrator (MV) 6v Non-Synch, MV 4v Split-Reed which gave the 11kV spark, MV 12v Split-Reed for PP-18/AR, MV 32v Van Ruytken 50 hertz'.
Bottom: Hendershot Cavity Resonator with magnet, brass with coping saw blade attached (soldered) as the 'resonator', old power drill laminated body with a 24awg full coil inside and two magnets with South in.
This from his Patent Application and more a proof of concept device.
Crystal Set that was a disappointment as Eric's and my twin 1N34 probe does a much better job without coils nor variable capacitors and is good for both TEM and LMD.
Was looking for a 'front end' for Moray and a new one at the bench.



Uploaded with ImageShack.us

If a Magnet is a Force device and contains no energy then it may be able to be used as a detector as shown in the experiment above.
This was an attempt at another resonator but any oscillation eventually died down.
If an outside and unseen Force is at work then this with a light line of UV detectors could be used to chart any phenomena.
Is this another candidate for detecting Earthquakes or Cosmic events and will probably be an easy sensor build that can be charted on a Computer?
Beauty of this simple device is that one moving small magnet has influence over the others and reminds me of the Chinese 'Zhang Heng Seismograph' which could detect an Earthquake before the event and also show from which direction it would come from.

The use of moral mechanisms for prevention of cataclysmic earthquakes (in English)

Those of you here still Posting and working at the bench, your efforts have not been ignored and most appreciated.
All the best with your experiments.

Smokey

[orgonaut314]

That was an embarrassing mistake! I wrote that

On another note, (groan) I have just acquired some further glom. A second hand, Tektronix 545b (tube) Oscilloscope (circa 1965). Along with three plug in units and a box with 100’s of vacuum tubes (mostly spares for the scope). It was all going to e-waste, but I acquired the lot for less than a carton of beer. No more borrowed scopes. Going through the box of tubes there are quite a few twin triodes, like 12AX7, 12AU7A, a couple of Philips QQE04/20 Double Tetrode’s some 807’s and many more. I have not gone through them all yet. The scope is huge and heavy, the fan makes a bit of noise but the screen very clear. It seems to be in very good condition.


Picture of a Tektronix 545B, (not my pic but the same scope).

Congratulations! I just have got a frequency counter with much more precision to make better frequency graphs and magnification calculations


Also got a 6sn7 tube, the other tube on the picture is for fun.


@Dr-Green: very beautifull work

[Sputins]

Old and new, or is it new and old...

2x DMTs for 3670 kc and 2x TMTs for 160 metre band:

All the fixings and connections on (the new) coil ends and between coils are now complete. The only things that remain are the capacitance terminals and method of connecting them to the coils. A length of 1.5mm diameter wire connects the secondary to the extra coil:

Very nice! Particularly the new twin 160 metre band TMT coils..

The nut and bolt fittings I would assume are 316 stainless steel, in order to be non-magnetic? Would Brass fittings have slightly better conductivity?
Seems like they are slightly adjustable for various coupling arrangements if need be.

[dR-Green]

Old and new, or is it new and old...

2x DMTs for 3670 kc and 2x TMTs for 160 metre band:



All the fixings and connections on (the new) coil ends and between coils are now complete. The only things that remain are the capacitance terminals and method of connecting them to the coils. A length of 1.5mm diameter wire connects the secondary to the extra coil:

[Sputins]

Hi Sputins, thanks for posting the portrait. That piece of music might be an interesting project to play around with.

Bach was inspired by Martin Luther, and the part in the video with the black ink reference, as well as translating the New Testament was about Luther, not Bach. Although I'm sure Bach must have thought of the black ink in the same way. What a tragedy that people who have absolutely no vision or comprehension of anything beyond their noses had such influence back then, and are still in charge of things today.

That was an embarrassing mistake! I wrote that post late at night (1am) after watching the doco with several glasses of wine, perhaps not quite at my sharpest! And of course it was Martin Luther who wrote the translation of the New Testament.

Fixed it now.

On another note, (groan) I have just acquired some further glom. A second hand, Tektronix 545b (tube) Oscilloscope (circa 1965). Along with three plug in units and a box with 100’s of vacuum tubes (mostly spares for the scope). It was all going to e-waste, but I acquired the lot for less than a carton of beer. No more borrowed scopes. Going through the box of tubes there are quite a few twin triodes, like 12AX7, 12AU7A, a couple of Philips QQE04/20 Double Tetrode’s some 807’s and many more. I have not gone through them all yet. The scope is huge and heavy, the fan makes a bit of noise but the screen very clear. It seems to be in very good condition.


Picture of a Tektronix 545B, (not my pic but the same scope).

[dR-Green]

Thanks for the links dward.

[dward]

Since we're on a Bach kick here are some links that may shed light on what Eric is talking about with Bach and Time forwards/backwards, endless key shifts and all the rest.

It wasn't until I actually looked at bach's music that I understood the time/energy phenomena Eric was getting at. I can play music much easier than I can manipulate, understand, or utilize math so this is far easier for my mind to comprehend than trying to use Eric's functional math alone.


https://www.youtube.com/watch?v=A41CITk85jk

https://www.youtube.com/watch?v=xUHQ2ybTejU

[dward]

For those with a physics background (like me I’m a physics engineer) this article might be interesting:

http://arxiv.org/pdf/physics/0010036.pdf


'The experiment is described which shows that Coulomb interaction spreads with a limit velocity and thus this kind of interaction cannot be considered as so called “instantaneous action at a distance”’

Theoretical one can model the longitudional wave in the Maxwell equations using imaginary wavenumbers. The resulting wave is called an evanescent wave. This wave is known to science and has weird properties like tunneling through a waveguide. If you have two waveguides parallel than the evanescence transports energy from tube one to the other. Exactly like our mutual induction transports energy from ring to ring.

But This article shows that the abstract mathematical solution has properties like the lines of force are at infinity immediately. Now this above mentioned experiment shows that this is not the case. These coulomb lines propagate with a finite velocity just like they are matter themselve! So the evanescent solution in the Maxwell equation does not hold and is a mathematical abstraction. Not evanescence but the longitudional Tesla wave explaines what we call evanescence and the ether exists!

Paul Dirac brings the point in the conclusion. It is very clear.
'P.A.M. Dirac wrote ([9], p. 32): “As long as we are dealing only with transverse waves, we cannot bring in the Coulomb interactions between particles. To bring them in, we have to introduce longitudinal electromagnetic waves and include them in the potentials Aμ.” It is known, however, that generally accepted Maxwellian electrodynamics forbids the spreading of any longitudinal electro-magnetic perturbation in vacuum. So Dirac writes ([9], p. 32): “The longitudinal waves can be eliminated by means of a mathematical transformation...”. But after this transformation one gets the theory in which a charge is always accompanied by the Coulomb field around it, i.e. ([9], p. 32) “Whenever an electron is emitted, the Coulomb field around it is simultaneously emitted, forming a kind of dressing for the electron. Similarly, when an electron is absorbed, the Coulomb field around it is simultaneously absorbed”.
In accord with the above it was shown [1-4] that the Coulomb interaction “works” instantaneously, if one accepts that basic equations of classical electrodynamics are right. On the other hand our experiment shows that the Coulomb interaction, at least, does not spread instantaneously. The proper inference from this experiment is that the Coulomb interaction cannot be considered as so called “instantaneous action at a distance” and, in turn, the basic equations of classical electrodynamics can be incomplete and moreover, their application is even limited in classical electrodynamics.’

-----

Now I would like to add that Eric posted an article By the father of the Maxwell equations: Oliver Heaviside that argues just the same that these lines of force cause the apparent relativistic mass. This backward force is caused by the Coulomb lines bending backward when a particle is accelerated making it apear as if it cannot be accelerated beyond the speed of light. Very important historical experiment for Einstein!

Heaviside used this argument of the bending Coulomb lines to disprove relativity. If given enough time to settle the Coulomb lines, the particle could be accellerated far beyond the speed of light he believed and I think he might be very right!

WOW thanks for all this! That experiment is neat. Also, I was taught a few things relating to Dirac about Electronics in college but I never thought to actually read what He wrote. Seems I will be finding his work to view as well. thanks for the reminder with Dirac as well.

One thought I had when reading this was about the nature of those "disruptive discharges" that tesla used for his ether work. I seem to remember him talking about the difference between electron flow, which proved deadly painful, and what He was actually after: the ether flow. Perhaps I need to investigate non electric means.

I am by no means giving up on this teleportation idea, it just may take a bit of lateral thinking.

As an aside have any of you guy's read Ken Shoulders work? He's a physicst who left MIT to pursue self funded research on what he calls EVO's which are these streaming plasmatic electron events in nature. His work seems to mirror Vassilato's work on Dark and Light currents, only ken is able to reproduce them in the lab.


Ken SHOULDERS -- Electrum Validum Archives

[dR-Green]

Hi Sputins, thanks for posting the portrait. That piece of music might be an interesting project to play around with.

Bach was inspired by Martin Luther, and the part in the video with the black ink reference, as well as translating the New Testament was about Luther, not Bach. Although I'm sure Bach must have thought of the black ink in the same way. What a tragedy that people who have absolutely no vision or comprehension of anything beyond their noses had such influence back then, and are still in charge of things today.