Eric Dollard

[Ajay]

Can you provide more info on the pulse widths and time data? Any more info would be useful. Thanks.

Aaron posting for Eric.

Hey Aaron,
Input to the LMD circuit was 10v peak to peak square wave at 50% duty cycle.
The output pulse width was about .5ms. The pulse width remained constant as higher frequencies were reached, but the pulse repetition rate and spectral density increased.
The inductance and capacitance values were within very tight margins of each other (+- 5% max).

I was pretty bummed because I have made several attempts to recreate this circuit and I couldn't seem to get one wire transmission or any other Tesla coil effects. I tried using multiple types of amps, with and without resistors (to meet impedance requirements for the amps), and it didn't produce the expected results either.

Any insight from Eric would be awesome.
Thanks!
Ajay

[t-rex]

Pulse Width Conversion

Hey Aaron,
Input to the LMD circuit was 10v peak to peak square wave at 50% duty cycle.
The output pulse width was about .5ms. The pulse width remained constant as higher frequencies were reached, but the pulse repetition rate and spectral density increased.
The inductance and capacitance values were within very tight margins of each other (+- 5% max).

I was pretty bummed because I have made several attempts to recreate this circuit and I couldn't seem to get one wire transmission or any other Tesla coil effects. I tried using multiple types of amps, with and without resistors (to meet impedance requirements for the amps), and it didn't produce the expected results either.

Any insight from Eric would be awesome.
Thanks!
Ajay

Ajay I need to know what the input pulse width vs output pulse width is. In other words, the rectangle in vs the impulse out. Since I go back into the bush soon, mail it to Lone Pine with details. The extra ordinary effect you seek are only exhibited in my composite Alexanderson Network with interdependent TEM & LMD propagations. I gave a short description of it in my " Multiple Co-ordinate Systems " presentation.73 DE N6KPH

[David G Dawson]

Vacuum Tubes

Hello Eric and Aaron,
Only now appreciating what you had passed on with respect to the vacuum tunes.
Have spent that time in reviewing pulse techniques for my 'Energy Synthesis' device and now makes perfect sense what you had written:



I was perhaps the only one to benefit from that information but surely do appreciate as I was the only one I know of that had built most of your tube designs.
You gave information that others would not appreciate as it is an entirely different world working with the tubes and the aether.
Will advise as we progress as I have been absent from the bench just like you and finally getting back to where we belong.
All the Best.

Smokey

[David G Dawson]

Earthquakes

Earthquakes:
Quote:
Is California about to be hit by the ‘Big One?’ Fears of a massive quake are rising after 134 mini-tremors rattled the San Andreas fault area just this past week.

Thomas Jordan, the director of the Southern California Service Center is stating that “Any time there is significant seismic activity in the vicinity of the San Andreas fault, we seismologists get nervous.”

Seventeen of the earthquakes were stronger than a 2.5, six of them were stronger than a 3.0, and the largest quake was a magnitude 4.6.

Any comments from Eric at this point?
I am assuming he is listening to what is going on here on his 'wires'.

The Cosmic Ray Detector (CRD) is not hearing anything out of the ordinary but is most difficult to monitor and requires a digital recording input which I can set up here but just too busy with the Tubes and making rain.

Smokey

[David G Dawson]

Tesla Magnifying Transmitter

Tesla Magnifying Transmitter:
If anyone is having difficulty in understanding either Eric or Tesla himself, this article may help as it describes all in a lay manner:

https://steemkr.com/life/@alkemix/di...rluminal-power

Page 8 is particularly helpful.
Describing the difference between Magnetism and Dielectricty and in such that between TEM and LMD.

Have built two 12au7a amplifiers for the 120 degree phase shift required for the rotating field for the Tetrahedral Energy Generator (TEG) and hope to get fully back into the Lab shortly.
The amplifiers are a Pulse Amp plus delay multivibrator and gives a variable delay from 3 to 300 microseconds and ideal for the 120 degree phase shift required.
This is what 'Bruce TPU' was seeking but probably never realised.
Has taken me 3 years to get to this point and was going to use the AD-YU Radar variable delays but feel this the better option.
All the Best.

Smokey

[Aaron]

Live call with Eric Dollard

LIVE CONFERENCE CALL WITH ERIC DOLLARD - FREE TO JOIN - TOMORROW FEB 18 SUNDAY, 11AM PACIFIC STANDARD TIME.

We'll make announcements, Eric will share what he has been working on lately and we'll open up for questions about anything he has written or presented on.

Conference Dial-in: 1-857-232-0155
Conference Code: 582590

[aminnovations]

Sharing my work - new website

Hi,

I am very happy to be attending the 2018 conference! I have wanted to attend for many years but there have always been other responsibilities calling on my time. Finally I am able to come and looking forward to meeting everyone, all the discussions, and presentations.

I have also at last started to write-up some of my own work in a blog website. It is just the beginning, and a lot of material and experiments yet to be added, but it is work in progress, and good to finally be sharing my own work.

For those interested the link is:
AMInnovations | Research into the displacement and transference of electric power

73,
Adrian

[Marcus Neuhof]

Adrian, that's a beautiful lab setup and though I have only started reading the writeups your experiments look fascinating.

[Macak]

Cosmic Induction Generator

Some recent works with resonant transformers built for Eric's Cosmic Induction Generator.

First series: The center field between the two conjugate wound transformer secondaries is AM modulated, exposed to a burnt out 500 watt bulb creating the Aurora plasma mist. About 150 watts excitation at 1900 kHz.

Second series: Single transformer, AM modulated musical plasma discharge. Bach on a spark. Description below.

Macak is back!


[IMG][/IMG]

[IMG][/IMG]

[VIDEO]https://www.youtube.com/watch?v=7uYt8e5eTgY[/VIDEO]


[IMG][/IMG]

[IMG][/IMG]

Video below: Music from a plasma discharge. There is NO speaker in this video projecting the sound. The sound is being projected from the plasma arc discharge displacing the air as it pulsates to the audio frequiencies. The arc is being generated by an amplitude modulated radio frequency signal (1900KHZ) from a radio transmitter at a power level of approximently 400 watts. The device shown creating the arc is a quarter wave resonant transformer (Telsa Coil) in telluric mode with the lower terminal of the transformer's secondary connected to earth. Design form factor is by Eric Dollard N6KPH and proportioned and fabricated by Bruce Gavin KD1MW.
Recording of video and audio was done with a Canon EOS M camera. Only the built in microphone of the camera was used to record the sound. Note the sharp pointed tips from the plasma brush discharge when the camera finally focuses. This is an organic shape that can be found in many natural conditions. Audio chain was limited to just the narrow bandwidth of the Yaesu FT990's AM passband. The bright light that appeared for a moment was a small florescent tube reacting to the high magneto dielectric field surrounding the plasma discharge.

[VIDEO]https://www.youtube.com/watch?v=0Bl99ZCQx0g[/VIDEO]

[Aaron]

vid prob?

Neither of the videos seem to play.

edit - ok, the embed option requires the full domain like: https://www.youtube.com/watch?v=0Bl99ZCQx0g
The abbreviated youtu.be versions won't work. I embedded these into my next 2 posts.

[Aaron]

vid 1 cig

[VIDEO]https://www.youtube.com/watch?v=7uYt8e5eTgY[/VIDEO]

[Aaron]

vid 2 cig

[VIDEO]https://www.youtube.com/watch?v=0Bl99ZCQx0g[/VIDEO]

[Sputins]

Hi,

I am very happy to be attending the 2018 conference! I have wanted to attend for many years but there have always been other responsibilities calling on my time. Finally I am able to come and looking forward to meeting everyone, all the discussions, and presentations.

I have also at last started to write-up some of my own work in a blog website. It is just the beginning, and a lot of material and experiments yet to be added, but it is work in progress, and good to finally be sharing my own work.

For those interested the link is:
AMInnovations | Research into the displacement and transference of electric power

73,
Adrian

Probably the cleanest, polished, fantastically engineered and most extensive analysis on these types of systems I’ve ever seen undertaken thus far. Credit to you Adrian.

[Sputins]

[QUOTE=Macak;311368]Some recent works with resonant transformers built for Eric's Cosmic Induction Generator.

First series: The center field between the two conjugate wound transformer secondaries is AM modulated, exposed to a burnt out 500 watt bulb creating the Aurora plasma mist. About 150 watts excitation at 1900 kHz.
Second series: Single transformer, AM modulated musical plasma discharge. Bach on a spark. Description below.

Macak is back!


[IMG][/IMG]

Lovely coils Macak. – Do you live in some kind of cave or underground? Wow indeed.

Looking forward to watching the videos when I get home!

[Aaron]

Hi Adrian

Hi,

I am very happy to be attending the 2018 conference! I have wanted to attend for many years but there have always been other responsibilities calling on my time. Finally I am able to come and looking forward to meeting everyone, all the discussions, and presentations.

I have also at last started to write-up some of my own work in a blog website. It is just the beginning, and a lot of material and experiments yet to be added, but it is work in progress, and good to finally be sharing my own work.

For those interested the link is:
AMInnovations | Research into the displacement and transference of electric power

73,
Adrian

Hi Adrian,

Please do introduce yourself to Eric and I at the conference. I want to show him some pictures on your website so he knows the amazing work you're doing. Would like to learn more!